resistencia del tubo de Aleacion 20 N08020

Inconel 600 seamless tubes of standard UNS N06600 and ASTM B167 are the ones manufactured to sustain excessively high pressure and come with great warranty.

Hastelloy Alloys Directory
The Corrosion Resistant HASTELLOY alloys are widely used by the chemical processing industries. The need for reliable performance leads to their acceptance and growth in the areas of energy, health and environmental, oil and gas, pharmaceutical and flue gas desulfurization industries.

Hastelloy C2000 is available in a variety of sizes and thicknesses, this type of nickel-chromium-molybdenum alloy is renowned for its superior strength and corrosion resistance.

Alloy 800 is a nickel-iron-chromium alloy with high strength and excellent resistance to oxidation and corrosion at high temperatures. ASTM B407 UNS N08800 Incoloy 800 W. Nr. 1.4876 Welded Pipe is widely used for construction of equipment requiring corrosion resistance, heat resistance, strength, and stability for service up to 1500°F (816°C).

SCH40 Monel 400 Pipe is designated as Werkstoff Number 2.4360 and UNS N04400. Alloy 400 Pipe also known as Monel Alloy 400 Pipe, Monel 400 Pipe & Nickel Alloy 400 Pipe.

Hastelloy C2000 Tubes are used in a broad range of industries including petrochemical processing, chemical processing equipment manufacturing, oil refineries and power plants.

Many businesses prefer the fact that Inconel 600 is a very versatile alloy. Therefore the alloy is used in several key industries in various forms including the popular Inconel 600 Pipe. The construction of these pipes could be either welded or they could be seamless. There are benefits to using both. For e.g. the preference of an Inconel 600 Welded Pipe, is in applications where its economics plays a very important role. Though cheaper than the seamless constructed one, these pipes have a longitudinal seam, which could become susceptible to intergranular corrosion – if they are improperly processed. In a scenario, where the buyer requires the highest form of corrosion resistance and the ability to withstand a higher pressure, Inconel 600 Seamless Pipe is the best option.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

The pipes of seamless configurations have higher load-bearing capacity and strength over other grades.

Nickel based 800 Incoloy Hexagonal Pipe is known to have a good resistance to corrosion. Specifically speaking, the Incoloy 800 Pipe offers sufficient resistance against both carburization as well as oxidation corrosion.

In C276, molybdenum makes Hastelloy harder and stronger at high temperatures. The properties of this alloying element and its incorporation into the material also make it ideal for welding applications. These nickel alloys are easy to manufacture and form. They also exhibit good ductility and are capable of cold working.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.42

Inconel 600 pipe is a nickel- chromium based alloy. Alloy 600 UNS N06600 Square Pipe offers good resistance against corrosion at elevated temperatures. The other characteristics of the 600 Inconel Seamless Pipe is its good resistance in carburizing as well as in chloride containing environments.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

Technically, Inconel alloy ERW Pipes are resistant to most alkalis, salts, waters, food products, organic substances and atmospheric conditions at both normal temperature and elevated temperatures. Inconel Pipes has good oxidation resistance in intermittent service to 870 Degree C and in continuous service to 925 Degree C.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

Inconel Polished Pipe is typically used in applications where they are exposed to high temperatures. In the presence of high temperature, a thick, stable passivating oxide layer is formed when Inconel Steel Pipe is heated.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.

inconel 3IN tube 600 601 625 718 support high strength, has good dimensional accuracy, is sturdy in construction, has an excellent surface finish, and can withstand hard hits. In addition, it has greater resistance to general corrosion, stress corrosion cracking, crevice corrosion, pitting corrosion and oxidation resistance.

La tuberia sin costura ASTM B167 inconel 600 es menos resistente a las soluciones oxidantes fuertes, como el acido nitrico concentrado calentado.

Alloy N10675 is a high corrosion resistant nickel molybdenum Alloy. This alloy is characterized by a high resistance against hydrochloric acid and other reducing media in a wide range of temperature and concentration.

ASTM B165 (same as ASME SB-165) is a standard specification covering the nickel-copper alloy Monel 400 (UNS N04400) in cold-worked seamless tube form.

Copper nickel alloys are very corrosion resistant to sea water as well as thermally stable. Aviva Metals stocks C70600 and C71500 Copper Nickel pipes.

INCONEL pipes and tubes retain all of the key characteristics associated with these nickel alloys. This includes industry-leading corrosion resistance, good strength and excellent high-temperature performance.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.

Commercially pure nickel tubes, such as those made from Nickel Alloy 200, contain at least 99% nickel and are suitable for use where maintaining product purity is important, such as in the food production industry. They also have good thermal, electrical and magnetostrictive properties.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.32

Nickel based alloys are very useful materials for the manufacture of high quality tubing products. One of the key reasons is that they offer excellent corrosion resistance in both aqueous and high temperature applications.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

Hastelloy C-276 is also one of the few materials resistant to wet chlorine, hypochlorite and chlorine dioxide. This special nickel alloy has excellent resistance to crevice corrosion and stress corrosion cracking, as well as chloride pitting. Its low carbon content minimizes carbide precipitation during welding and maintains its excellent corrosion resistance during welding. This means that C-276 is easily fabricated by welding using methods similar to those used for nickel-based alloys.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.39

Designed to be used for general corrosive applications, the nickel based Incoloy 825 Tubing is often produced keeping in accordance with the ASTM B163/ASME SB 163 specification. The 2.4858 Inconel 825 Tubes can be manufactured either by hot finishing or by cold working. On the other hand, ASTM specified SB 163 UNS N08825 Alloy 825 Tube is intended to be used for condenser and heat exchanger applications. The ASTM B163 specified UNS N08825 Tubing covers important dimensions like outside diameter and average wall.

UNS N07718 Inconel Long Radius Elbows are 1.5 times larger than the nominal diameter of the pipe and withstand high pressure and heat. Industries such as cement and sugar use Inconel elbows for better and uniform product flow. Premium Inconel ASTM B366 UNS N06625 Seamless Bends, Bend Radius Range R=3D-10D, Bend Angles From 10 Degrees To 180 Degrees, Available From Stock.

Inconel 600 alloy is a nickel chromium stabilized alloy. It has very good oxidation resistance at higher temperatures. In addition, it has excellent resistance to carburizing and chloride containing atmospheres. It is a non magnetic alloy with very good mechanical properties. Inconel 601 is a chromium and nickel based material for applications requiring heat and corrosion resistance. This material stands out for its resistance to high temperature oxidation.

This nickel alloy was designed for service temperatures from cryogenic to elevated temperatures in the range of 1090¡ãC (2000¡ãF).

Alloy 625 is generally supplied in the annealed condition, to provide utmost stability during fabrication and subsequent service. INCONEL 625 alloy has found to have a resistance to potable and salt or brackish water, where Chloride ions cause pitting and crevice corrosion to become established. As a result, pipelines for gathering sour gas have been built with solid (or clad) INCONEL 625 alloy and used in seawater heat exchangers in refineries, power plants, and offshore topside services that often need this material.

Nickel 201 is pure commercial nickel with very low carbon content and has been approved for service in high temperature environments up to 1230¡ãC.

Nickel alloy seamless tubing is designed to withstand extreme pressures and temperatures in different media. These tubes can be easily bent or flanged and have excellent workability. Nickel alloy seamless pipes are available with plain ends, beveled ends, threaded ends and plain ends.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.53

Nickel alloys are some of the most useful materials for manufacturing technically superior pipes and tubes for industrial applications. Their inherent properties make them viable for a wide range of uses. Nickel alloys are exceptionally corrosion resistant and can be used in high-temperature environments.

The seamless nature results in a very uniform surface, which results in a uniform wall thickness along the length of the pipe. There are alloy nickel tubes and pure alloy tubes. Pure nickel pipe is actually commercially pure and contains about 99% nickel in its composition. Nickel welded pipe is ideal for welding needs. Nickel is inherently very corrosion resistant and lightweight. These attributes of elements are used in various applications.

Monel 400 has high strength and toughness over a wide temperature range and excellent resistance to many corrosive environments. The composition is shown in the Table below.

Inconel X-750 alloy (UNS N07750) tube consists of approximately 70% nickel alloyed with chromium, iron and other select elements.

Incoloy 800/800H/800HT grade alloys have a variety of special properties and characteristics that make pipes and tubes even more demanding. As a manufacturer and supplier of such products, we ensure that all our products are manufactured according to the needs and requirements of our customers. Therefore, we use high-quality raw materials that are well tested and used according to international quality standards. With it, modern technology and the latest tools can be used to create pipes and tubes of precise size and length.

Nickel 200 seamless tube is a solid solution strengthened, commercially pure wrought alloy. One of the more recommended alloy grades, the Alloy 200 Welded tubing has excellent mechanical properties such as high tensile strength, good toughness and ductility.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

Hastelloy C-276 is a grade of Hastelloy, a nickel-molybdenum alloy. There are many different grades of Hastelloy, including the C-276. Hastelloy grades are optimized for specific applications.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.41

Like many other nickel alloys, it is ductile and easy to form and weld. Hastelloy c276 is used in most industrial environments where corrosive chemical environments are present and other alloys fail.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.27

VDM Alloy N10675 is a high corrosion resistant nickel molybdenum Alloy. This alloy is characterized by a high resistance against hydrochloric acid and other reducing media in a wide range of temperature and concentration.

Some typical applications for HASTELLOY C276 include equipment components in chemical and petrochemical organic chloride processes and processes using halide or acid catalysts. Other industrial applications include pulp and paper (digester and bleaching zones), scrubbers and pipes for flue gas desulfurization, pharmaceutical and food processing equipment.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.19