round bar stainless steel 16mm

The advantageous properties of stainless steel can be seen compared to standard plain carbon low carbon steels, like 304, 304l, 316, 316l and 347. Although stainless steel has a wide range of properties, in general, compared to mild steel, stainless steel has: higher corrosion resistance, higher low temperature toughness, higher work hardening rate, higher hot strength, more High ductility, higher strength and hardness, more attractive appearance and low maintenance.

Grade 316 is known for its toughness and excellent corrosion resistance. This alloy has proven useful in many metal engineering projects, especially in exterior and coastal applications and where welding is required. Machining at level 316 is a little more difficult, but can be done successfully with the right tools.

304 stainless steel is the most common form of stainless steel used around the world due to excellent corrosion resistance and value. 304 can withstand corrosion from most oxidizing acids. That durability makes 304 easy to sanitize, and therefore ideal for kitchen and food applications.
Standard SUS, AISI, DIN
Diameter 5~500mm
Length ¨Q12M or As Per Clients’ Requirements

Hardening properties of stainless steel
The advantage of work-hardenable grades of stainless steel is that the strength of the metal can be significantly increased simply by cold working. A combination of cold working and annealing stages can be employed to impart a specific strength to the manufactured part. A typical example is wire drawing. The wire used as the spring will be work hardened to a specific tensile strength. If the same wire is used as a bendable tie wire, it is annealed, resulting in a softer material.

Stainless steel round bar, as the name suggests, is a product made of different grades of stainless steel material. Depending on the grade of stainless steel, they can be used in various industries. These round bars have high strength, and due to their high chromium content, they are effectively resistant to corrosion.

F55 is the common industry name for UNS S32760 stainless steel. Industry uses ASTM A276 F55 Duplex Round Bar because of its high mechanical strength and resistance to pitting and crevice corrosion. It is available in thicknesses from 3 to 12 mm and in ISO tolerance classes h11, h11-DIN 1013. It is a ductile product and can therefore be used in railway engines and passenger cars.

Grade 410 stainless steel is a general-purpose martensitic stainless steel containing 11.5% chromium with good corrosion resistance. However, through a series of processes such as quenching, tempering, and polishing, the corrosion resistance of grade 410 steel can be further enhanced. Quenching and tempering can harden grade 410 steel. They are typically used in applications involving mild corrosion, heat resistance and high strength.

While 316 is not completely rust-proof, the alloy is more corrosion-resistant than other common stainless steels. Surgical steel is made from subtypes of 316 stainless steel.

ASTM A276 is a specification that considers various categories of stainless steel bar or bar produced in different forms. Stainless steel A276 threaded rods are available and supplied in many conditions.

ASTM A479 Round Bar has one important thing going for them: they are made from stainless steel. Stainless steel is corrosion resistant and the stainless steel which has higher alloy content are able to withstand the onslaught of acids, “chlorine bearing environments” as well as solutions containing alkaline.

As stainless steel rods come in many shapes and shapes such as flat, hexagonal or hexagonal, round and square. Mostly, the form of a bar defines its use in an application area or strength.

Polished stainless steel bars are made of 304 stainless steel. They have good machinability, good formability and excellent weldability. They also show good corrosion resistance. These rebars are used in a variety of architectural and structural applications. Instead of working wheels, these bars are polished with leather chain straps. This is done for a smoother and brighter surface. They are also available in a mirror finish.

Cold-drawn stainless steel bars are cold-finished, which means they are further processed after hot rolling. The hot-rolled and cold-drawn process helps improve bar dimensional tolerances, straightness, surface appearance, and overall physical properties. These SS bars are the most accurate compared to hot rolled bars. They have a smooth surface finish.

Features of ferritic stainless steel bars are: chromium base, typically less than 0.1% carbon, increased resistance to harsh environmental conditions, increased resistance to stress corrosion cracking (SCC), greater susceptibility to intergranular corrosion, and increased susceptibility to intergranular corrosion at very low Brittle at temperature, most often used for fairly thin sheets or pipes, since welds are not particularly tough.

Like other austenitic grades, these grades have excellent toughness even down to low temperatures, although other grades are often used in this environment.
Grade 310sL (and a proprietary version of this grade), a version of the 310s with a maximum carbon content of 0.03%, is sometimes used in very specific corrosive environments, such as urea production.

316 stainless steel round bars are ideal for most machining techniques and for indoor and outdoor applications. AISI 316 stainless steel is a non-magnetic, high-strength material with excellent corrosion resistance. 316 is slightly stronger than 303 and 304 stainless steel. Making it ideal for the food and pharmaceutical industries, as well as in areas involving marine environments, aerospace, process equipment, chemicals or other aggressive substances.

Excellent oxidation resistance under mild cycling conditions at 2000¡ãF is characteristic of 310. Due to its high chromium and moderate nickel content, 310 has good resistance to sulfidation and other forms of hot corrosion. 310 is widely used in moderate carburizing atmospheres, such as petrochemical environments.

Grade 316L is a low carbon version of grade 316 stainless steel with increased resistance to surface corrosion and can be used in the same temperature range. It is also more commonly used in applications that require large size components to be welded. Although the 316/316L is widely considered the default choice for applications requiring marine grade products, it has reduced performance in warm salt water.

While the chemical composition of stainless steel 304l round bars may not differ much from grade 304, this alloy has undoubtedly proven to be very useful. This low carbon ASME SA479 Type 304l round bar has been modified to increase its weldability.

316 stainless steel round bars are ideal for most machining techniques and for indoor and outdoor applications. AISI 316 stainless steel is a non-magnetic, high-strength material with excellent corrosion resistance. 316 is slightly stronger than 303 and 304 stainless steel. Making it ideal for the food and pharmaceutical industries, as well as in areas involving marine environments, aerospace, process equipment, chemicals or other aggressive substances.

Stainless steel bars or rods are used in a variety of applications and are widely used in the construction industry due to their durability and resistance to corrosion and rust.
We stock bars and rods in diameters ranging from 3mm to 76.2mm, lengths up to 3m and available in 3 metal grades.
303 – has good corrosion resistance, can be freely processed, not suitable for welding or forming.
304 – has good corrosion resistance, suitable for forming and welding, general machining.
316 – is our highest grade, has excellent corrosion resistance, is suitable for forming and welding, but is slightly more difficult to machine.

Features of 303 Stainless Steel Rod: This free machining variant of T302/304 is used for automated machining operations. Resistant to atmospheric exposure, disinfecting solutions, most organic and many inorganic chemicals, most dyes, nitric acid, and food.

ASTM A479 can be described as a standard specification for stainless steel bars. They are available in custom shapes and sizes for use in boilers and pressure vessels. The material specification is available in four grades including austenitic, austenitic-ferritic, ferritic and martensitic grades. They have good mechanical properties such as high tensile strength, yield strength, elongation, etc. These can be used for hot and cold working bars.

Super Duplex UNS S32760 Bar High resistance to pitting and chloride ions. The bars are heat treated at 1100 degrees Celsius and then water quenched. They have different standards like ASTM A479 UNS S32760 Hex Bar with different tolerance classes like H8 – H12, K10 to K12. These bars are used in the marine, food and surgical industries.

This stainless steel round bar is very weldable. Strength, corrosion resistance and simplified manufacturing can make it a cost-effective alternative to high strength carbon steel and other stainless steel grades.

Steel pipes can be disintegrated on the basis of its application. Typical applications of steel pipes are in the area of water pipelines, industrial water lines, oil pipe lines, cross country pipe line, agriculture and irrigation pipes, tube lines for natural gas, chemical industries, automobile industry, construction industries and other purposes.

304 Stainless Steel Round Bar, the most widely used stainless and heat resistant steel 304 has good corrosion resistance to many chemical corrosive agents as well as industrial environments.

Applications and typical uses of stainless steel round bars are: Offshore (foils, helideck platforms, etc.), food industry, pulp and paper industry, aerospace (turbine blades, etc.), mechanical parts, nuclear waste barrels, valve stems, balls, liners sleeves, valve seats, etc.

High strength for stainless steel bars
Stainless steel tends to have higher tensile strength than mild steel. Duplex stainless steels have higher tensile strength than austenitic steels. Martensite (431) and precipitation hardening grades (17-4 PH) have the highest tensile strength. These grades are twice as strong as the most commonly used stainless steels, 304 and 316.

Type 347 stainless steel has slightly improved corrosion resistance in strongly oxidizing environments than Type 321 stainless steel. Type 347 is stabilized with columbium and is more suitable for aqueous and low temperature environments due to its good resistance to intergranular corrosion. Both 347 and 321 have good resistance to polythionate stress corrosion cracking encountered in refineries. The high temperature oxidation resistance of 347 is similar to that of 304 stainless steel. For 1500¡ãF.
Standard SUS, AISI, DIN
Diameter 5~500mm
Length ¨Q12M or As Per Clients’ Requirements