Round head bolt Hastelloy C276 thread Nature Nickel Alloy b8m bolt

It demonstrates good resistance to neutral and reducing environments. This alloy creates a tenacious oxide, protective film that does not spall off, but it retains superior oxidation resistance at soaring temperatures.

Hastelloy Alloys Directory
The Corrosion Resistant HASTELLOY alloys are widely used by the chemical processing industries. The need for reliable performance leads to their acceptance and growth in the areas of energy, health and environmental, oil and gas, pharmaceutical and flue gas desulfurization industries.

Hastelloy C2000 Tubes are used in a broad range of industries including petrochemical processing, chemical processing equipment manufacturing, oil refineries and power plants.

Hastelloy C2000 is available in a variety of sizes and thicknesses, this type of nickel-chromium-molybdenum alloy is renowned for its superior strength and corrosion resistance.

It is able to withstand a wide range of oxidizing and non-oxidizing chemicals, and exhibits outstanding resistance to pitting and crevice attack in the presence of chlorides and other halides.

This provides greatly enhanced resistance to sulfuric acid. It also has a high chromium content, to maximize its resistance to oxidizing chemicals and process streams contaminated with ferric ions and dissolved oxygen.

Steel Plate are often used for structural and construction applications, pressure vessels, marine and offshord equipment, and military applications. The grade, elements and parameters of a steel plate are also important in how it is used.
Steel plates are classified by thickness: thin plate, medium plate, thick plate and extra-thick plate.
Thin steel plates are steel plates with a thickness between 0.2-4mm produced by hot rolling or cold rolling, and thick steel plates are those with a thickness of more than 4mm
The general name of the good board.
Thin steel plate refers to a steel plate with a thickness of not more than 3 mm. The commonly used thin steel plate thickness is 0.5-2MM, which is divided into sheet and coil supply. Thin
The steel plates are generally B-type steels, cold-rolled or hot-rolled steel plates with steel grades B0-B3. Requirements for thin steel plates: smooth, smooth surface, thick
The degree of uniformity, allowing a tight iron oxide film, must not have cracks, scarring and other defects. The process is divided into hot rolled sheet steel and cold rolled sheet
plate. Mainly used in Changlin Dongfeng fans, automobiles, electrical equipment, vehicles, agricultural machinery, containers, steel furniture, etc.
Thick steel plates refer to steel plates with a thickness greater than millimeters. Thick steel plate is divided into extra-thick steel plate and medium-thick steel plate.
Medium and heavy steel plates refer to steel plates with a thickness greater than 3 mm and less than 50 mm. Medium and thick steel plates are mainly used in shipbuilding, boilers, bridges
Armor and high-pressure vessel shells, etc.
Extra-thick steel plate refers to a steel plate with a thickness of not less than 50 mm. Extra-thick steel plates are mainly used in shipbuilding, boilers, bridges and high-pressure vessel shells
blog.

Alloy C276 plate is a high strength grade designed to be thicker than 6mm. The panels have a minimum tensile strength of 601mpa and a minimum yield strength of 204.8mpa. C276 composite panels are made by bonding two or metals in place. Meanwhile, Alloy C276 is resistant to oxidation at 1800¡ãF in the open air. However, alloy C276 is generally not recommended for high temperature service. The high molybdenum content makes alloy C276 prone to catastrophic oxidation under stagnant conditions, such as under solid deposits.

Hastelloy B2 pipe bend has excellent resistance to all temperatures and concentrations of hydrochloric acid.

Hastelloy Alloy C22 Flanges to the esteemed clients, which are manufactured by using pristine grade stainless steel.

C-22 is a great alternative when superaustenitic stainless steels (AL-6XN, 904L, and 254 SMO) and duplex stainless steels (2205 and 2507) will not withstand extremely aggressive media. This is because it is a nickel-chromium-molybdenum-tungsten alloy with better overall resistance to uniform and localized corrosion than any other Ni-Cr-Mo alloy, like Hastelloy C-276, C-4, and alloy 625.

Hastelloy C-263, is an age hardenable nickel-cobalt-chromium-molybdenum alloy.Hastelloy? 2 C-263 has some very positive attributes that make it ideal for a wide range of applications. HAYNES? 263 alloy combines properties which make it suitable for a variety of fabricated component applications in both aircraft turbine engine and industrial turbine applications.

Hastelloy C-4 is a nickel-chromium-molybdenum alloy with outstanding high temperature stability. It has high ductility and corrosion resistance. It’s high temperature resistance up to 1900 ¡ãF (1038 ¡ãC) makes it suitable for most chemical process application in the “as” welded condition.
Like other nickel alloys, it is ductile, easy to form and weld, and possesses exceptional resistance to stress corrosion cracking in chloride-bearing solutions (a form of degradation to
which the austenitic stainless steels are prone). With its high chromium and molybdenum
contents, it is able to withstand both oxidizing and non-oxidizing acids, and is resistant to
pitting and crevice attack in the presence of chlorides and other halides.

Hastelloy alloy C22 socket weld flanges have excellent resistance to reduce and oxidizing media. It also helps to resists the formation of grain-boundary precipitates in the heat-affected zone.

These fasteners are designed according to the quality of raw materials according to national and international standards, thus ensuring their durability and high quality.

The pipes are phosphoric acid, acetic and formic acid resistant. Also, it to various temperature and concentrations is hydrochloric acid resistance.

C-22 is used in severely corrosive media with high chloride and temperature applications such as buffer solutions, active pharmaceutical ingredients (API), fabric softeners, cleaning supplies, and fish, soy and chili sauce.

Light gauge steel framing is an integral part of modular construction as it is strong, lightweight, durable, accurate, free from long-term movement and is well proven in a wide range of applications.

Hastelloy B2 fasteners are primarily used for excellent resistance to reducing environments such as hydrogen chloride gas, sulfuric acid, acetic acid and phosphoric acid. Like other Hastelloys, B2 fasteners can be used in the as-welded condition because they resist the formation of grain boundary carbide deposits in the weld heat-affected zone. Due to reduced ductility, B2 fasteners are not recommended for use between 1000¡ãF and 1600¡ãF.

The alloy is forged between 2250/1750oF (1230/955oC) and then soaked at the forging temperature for 30 minutes per inch of billet or ingot section thickness. Forging should begin immediately, the billet is removed from the reheat furnace, a 25/40% reduction helps retain as much internal heat as possible. For optimum corrosion resistance, forged parts should be subsequently annealed. See Heat Treatment.

Hastelloy B3 Flanges are also being offered in customized sizes, and shapes to our valuable clients.

The flange is second most used joining method after selding. Flanges are used when joints need dismantling. It provides flexibility for maintenance. Flange connects the pipe with various equipment and valves. Breakup flanges are added in the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrdlated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls are required in the selection and application of all there elements to attain a joint, which has acceptable leak tightness.
A flange is a protruded ridge, lip or rim, either external or internal, that serves to increase strength (as the flange of an iron beam such as an I-beam or a T-beam); for easy attachment/transfer of contact force with another object (as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera); or for stabilizing and guiding the movements of a machine or its parts (as the inside flange of a rail car or tram wheel, which keep the wheels from running off the rails). The term “flange” is also used for a kind of tool used to form flanges.

A Pre-engineered steel is basically a that is made up of steel.

Alloy B2 should not be used at temperatures between 1000¡ãF and 1600¡ãF as the alloy forms secondary phases that could decrease the ductility of the material.

Hastelloy C276 thin wall tubing is commonly used in marine, aerospace, chemical processing, nuclear reactors, pollution control equipment, and more.

Hastelloy C22 fasteners are a general-purpose grade composed of chromium, nickel, molybdenum and tungsten alloys. These designs are designed to increase resistance to pitting, stress corrosion cracking (SSC) and crevice corrosion cracking. It has high chromium content and good resistance to oxidizing media. Durable and strong, these fasteners can be used in a variety of applications. Fasteners are provided according to the needs of customers, who can obtain fasteners from us in custom lengths and thicknesses. All our products comply with national and international standards.

Werkstoff’s number 2.4602, Inconel Alloy 22, VDM Alloy 22 and ATI 22 alloy fall under same UNS number.

Alloy X is known for its excellent high temperature strength and can withstand temperatures up to 2200¡ãF. The alloy can also be easily fabricated by manual and automated methods with forming and welding properties. In addition, Hastelloy X is resistant to corrosion, heat and oxidation and can withstand reducing or neutral atmospheres and oxidation.

It is commonly referred to by the tradename Hastelloy C22 and the universal designation UNS N06022. C22 has excellent corrosion and oxidation resistance, great mechanical properties over a wide range of temperatures, and good fabrication properties.

Applications in the chemical process industry involving sulfuric, phosphoric, hydrochloric and acetic acid.

Hastelloy fasteners can be used in applications involving a wide range of media, including reducing acids and oxidizing agents. As the most versatile alloy c276 fastener, it is most commonly used for bolting of all Hastelloy grade fasteners.

Hastelloy C276 alloy hollow rods tend to exhibit excellent resistance to localized corrosion and oxidizing media as well as reducing media.

Hastelloy C276 has excellent resistance to pitting, oxidation and stress corrosion cracking environments. Hastelloy is an alloy mainly composed of nickel, molybdenum and chromium, which is known for its high corrosion resistance. Its ductility, flexibility, durability, and other properties make it one of the most popular alloys for industry and household use.

NAS NW276 is a Ni Cr Mo alloy with excellent corrosion resistance in both oxidizing and reducing atmospheres. In this alloy, carbide precipitation in the heat affected zone (HAZ) is suppressed and corrosion resistance is improved by reducing the contents of C and Si.

While fitting and sizing bent pipes might seem complex at first, a basic understanding of the measurements used make matching them to your existing system or integrating them into a new design straightforward.

NAS NW276 is a Ni Cr Mo alloy with excellent corrosion resistance in both oxidizing and reducing atmospheres. In this alloy, carbide precipitation in the heat affected zone (HAZ) is suppressed and corrosion resistance is improved by reducing the contents of C and Si.