S32750 S32760 Super duplex stainless steel pipes highly resistant to inorganic acids

A789 UNS S31803 and UNS S32205 are two grades of duplex stainless steel that are widely used in various industrial applications. These Duplex S31803 Seamless Pipes are known for their excellent corrosion resistance, high strength, and good weldability. A789 is a specification that covers seamless and welded tubes made from duplex stainless steel.

Higher chromium, molybdenum and nitrogen content results in a Pitting Resistance Equivalent Number (PREN) > 40, providing superior pitting and crevice corrosion capabilities to austenitic and duplex stainless steels in virtually all corrosive media, and critical pitting temperature Above 50¡ãC .

ASTM A240 Type 2205 Plate is a duplex stainless steel plate that is used extensively in various industries such as chemical processing, oil and gas exploration, and marine engineering. SA 240 GR 2205 Sheet is made from grade 2205 stainless steel, which is a combination of ferritic and austenitic steel.

It is widely used in offshore oil and gas exploration/production and in heat exchangers in petrochemical/chemical processing.

The high chromium, molybdenum, and nitrogen levels provide excellent resistance to pitting, crevice, and general corrosion.

Various Duplex Pipe suppliers, stockist, distributors, exporters, importers, dealers, and stockholders procure the material good deal from Aesteiron and supply in their own countries with high margin, so always buy directly from us in China to get the best price.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

These plates combine desirable properties of austenitic and ferritic grades.

Super Duplex is composed of 24% to 26% chromium, 6% to 8% nickel, 3% molybdenum and 1.2% manganese, with the remainder being iron. Trace amounts of carbon, phosphorus, sulfur, silicon, nitrogen, and copper were also found in Super Duplex.

Duplex variety stainless steels work well in those applications which contain a high concentration of chlorine. Chloride ions, which are normally detrimental to conventional stainless steels, do not cause any damage to the much stronger Duplex Stainless Steel Pipe. The chemistry of this steel ensures better performance with higher mechanical properties in comparison to austenitic stainless steel pipes.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

The flanges shall not be used at temperatures over 600¡ãF [315¡ãC] since it may be subject to embrittlement after service at moderately elevated temperatures.

The material has high strength and corrosion resistance. The A182 F53 material is used to make flanges ranging from 1/2 inches to 48 inches under different standards such as ANSI, ASME, DIN and other international standards.

The high chromium, molybdenum and nitrogen content of 2205 provides better corrosion resistance than common stainless steels such as 316L and 317L in most environments.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.54

Duplex is often found in desalination and pressure vessel equipment located in port cities.

2507 is a super-duplex (austenitic-ferritic) stainless steel for service in highly corrosive conditions.

The structure of 2205 duplex stainless steel consists of a pool of austenite surrounded by a continuous ferrite phase. In the annealed condition, 2205 contains approximately 40-50% ferrite. 2205 is often referred to as the workhorse grade and is the most widely used grade in the duplex stainless steel family.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.49

The flange is second most used joining method after selding. Flanges are used when joints need dismantling. It provides flexibility for maintenance. Flange connects the pipe with various equipment and valves. Breakup flanges are added in the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrdlated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls are required in the selection and application of all there elements to attain a joint, which has acceptable leak tightness.
A flange is a protruded ridge, lip or rim, either external or internal, that serves to increase strength (as the flange of an iron beam such as an I-beam or a T-beam); for easy attachment/transfer of contact force with another object (as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera); or for stabilizing and guiding the movements of a machine or its parts (as the inside flange of a rail car or tram wheel, which keep the wheels from running off the rails). The term “flange” is also used for a kind of tool used to form flanges.

UNS31803 has been supplemented by S32205 (F60) which dual conforms to S31803 but has a higher minimum N, MO, NI and Cr which guarantees a better corrosion resistance.

Super Duplex Stainless Steel 1.4410 Nuts?is a super duplex stainless steel with 25 percent chromium, 4 percent molybdenum, and 7 percent nickel. High molybdenum, chromium and nitrogen content in?Super Duplex 2507 Hex Nuts?help the material withstand pitting and crevice corrosion.?

This heat treatment performed on the Duplex 2205 Pipe must be keeping with accordance to the specified temperature and quench conditions.

Super Duplex UNS S32750 /F53 Flanges are made from a super duplex stainless steel grade that has 24% chromium, 3% molybdenum, 6% nickel and carbon, manganese, silicon, sulfur, phosphorus, nitrogen and iron in the composition.

The flange is second most used joining method after selding. Flanges are used when joints need dismantling. It provides flexibility for maintenance. Flange connects the pipe with various equipment and valves. Breakup flanges are added in the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrdlated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls are required in the selection and application of all there elements to attain a joint, which has acceptable leak tightness.
A flange is a protruded ridge, lip or rim, either external or internal, that serves to increase strength (as the flange of an iron beam such as an I-beam or a T-beam); for easy attachment/transfer of contact force with another object (as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera); or for stabilizing and guiding the movements of a machine or its parts (as the inside flange of a rail car or tram wheel, which keep the wheels from running off the rails). The term “flange” is also used for a kind of tool used to form flanges.

Compared to 317L stainless steel, duplex steel has excellent resistance to chloride pitting and crevice corrosion. The alloy has excellent corrosion resistance to seawater and most concentrations of sulfuric acid. In addition, it is resistant to sulfide stress corrosion cracking (sour gas environments)

The 2205 Duplex Stainless Pipe exhibits magnetic properties in certain environments.

Duplex 2507 (UNS S32750) is a super duplex stainless steel with 25% chromium, 4% molybdenum, and 7% nickel designed for demanding applications which require exceptional strength and corrosion resistance, such as chemical process, petrochemical, and seawater equipment.

From corrosion resistance to strength, businesses around the world appreciate these properties of 2507 Super Duplex Seamless. Due to the dual microstructure phase, the weldability of this alloy is classified as good, which is why a relatively robust and durable super duplex welded pipe can be achieved.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.41

Duplex steel sheets are resistant to chloride stress corrosion cracking at 150¡ãC.

Alloy 2205 duplex stainless steel plate has better pitting and crevice corrosion resistance than 316L or 317L austenitic stainless steel in almost all corrosive media.

ASTM A182 Super Duplex F55 Hex Bolts is used for Pumps, valves, chokes, Connectors, Pipework/flanges, Oil & Gas components, Manifolds, etc. The resulting savings in weight of ASME SA 182 Super Duplex S32760 Hex Bolts can dramatically reduce the overall cost of fabrication. Anneal Heat this ASME SA479 Super Duplex S32760 Hex Bolts to 1025 Degree C ¨C 1120 Degree C ensuring sufficient time is allowed for the centre to achieve furnace temperature and hold for a time commensurate with the ruling section, followed by water quenching.

Duplex UNS S32750 coils have very low corrosion rates under very high corrosive conditions.

Duplex Steel UNS S31803 Seamless Pipes are widely used in various applications in the industry. These ASTM A790 Duplex Steel S31803 Pipes are made up of a combination of microstructure of austenitic and ferritic grains, which gives them unique properties. These properties include a high resistance to corrosion, excellent strength and toughness, and good weldability.

Super duplex steel flanges are very good for servicing a severe corrosive atmosphere like offshore and marine applications.

Duplex steels have higher toughness and better weldability. This is how alloy steel is used for industrially available pressure vessels.

The mechanical strength, corrosion resistance and low temperature toughness of the ASTM A182 F53 Flanges is higher than that of ordinary duplex stainless steels.

S32760 is a super duplex stainless steel with a ferritic-austenitic microstructure.