sae 4310 seamless alloy steel pipe

Nilo Alloy 36, W.Nr 1.3912, Invar 36® is a nickel-iron, low controlled expansion alloy that contains 36% nickel and possesses a rate of thermal expansion approximately one-tenth that of carbon steel.
Invar 36 Specifications: UNS K93600, W.Nr 1.3912

Common Trade Names: Nickel Alloy 36, Invar 36®, Nilo 6®, Pernifer 6®
Invar 36® is a nickel-iron, low expansion alloy that contains 36% nickel, Invar 36 has a low coefficient of expansion from cryogenic temperatures to about +500°F (260°C).
Invar 36 Tube OD:0.2-6mm, WT: 0.02-2mm

Nilo / Alloy K W.Nr.: 1.3981
UNS: K94610 ASTM F15
Fixed-expansion glass-encapsulated iron-nickel-cobalt alloys, Kovar alloys, have a linear thermal expansion coefficient similar to that of hard glass within a certain temperature range
For mating sealing with hard glass

These are said to be specifications for alloy flanges for high pressure and service. The 3% carbon content of these flanges provides a lot of room for improved weldability, which also increases their overall strength.

The material is made up of carbon, manganese, phosphorus, sulfur, silicon, chromium and molybdenum in the composition.

The alloying elements of A335 also impart higher corrosion resistance to the steel pipe. This also makes it the first choice for chemical companies.

There is absolutely no risk of intercrystalline corrosion on cooling or welding in Alloy Steel(AS) F12 Slip-on Flanges due to the low carbon content.Alloy Steel F12 Weld Neck Flanges is appropriate to various applications where its different remarkable characteristics are sought-after but a brushed/polished finish is not necessary.

Carbide solution treatment, also known as solution annealing, is a process in which fasteners or stainless steel rods are heated and then water quenched to ensure maximum corrosion resistance. A193 Grade B8 Grade 2 bolts are strain hardened after carbide solution treatment to improve strength properties and reduce the potential for wear.

Alloy steel is steel that is alloyed with a variety of elements in total amounts between 1.0% and 50% by weight to improve its mechanical properties. Alloy steels are broken down into two groups: low alloy steels and high alloy steels. The difference between the two is disputed. Smith and Hashemi define the difference at 4.0%, while Degarmo, et al., define it at 8.0%.[1][2] Most commonly, the phrase “alloy steel” refers to low-alloy steels.

WPHY 52 Fittings are recommended be heat treated by one or more of the following procedures: annealing (stress relieving), normalizing, normalizing and tempering, quenching and tempering.Made utilizing high-grade crude materials, these ASTM A860 WPHY Pipe Fittings are anti-corrosive and strong.

ASTM A193 Grade B8 Grade 1 Bolts and Studs Made of AISI 304 Stainless Steel. Type 304 is the most commonly used stainless steel grade in the fastener industry.

The ASTM A194 specification covers carbon, alloy and stainless steel bolts for high pressure and/or high temperature service.

ASTM A182 F9 flanges are more versatile. This flange is thinner in size, easy to install in tight working spaces, and more economical compared to various other flanges.

In order to strengthen chromium alloy flanges, elements such as copper, titanium, vanadium and niobium are added to the alloy.

ASTM A193 Grade B8M Grade 1 Fasteners are similar to Grade B8 but are made of AISI 316 stainless steel instead of AISI 304 stainless steel. Type 316 stainless steel has better corrosion resistance than type 304 stainless steel due to the addition of molybdenum.

Alloy 20 (Alloy 20) is an iron-based austenitic alloy developed to resist sulfuric acid corrosion. It has excellent resistance to sulfuric acid corrosion; it has strong resistance to phosphoric acid, nitric acid and chloride environments, chloride stress corrosion, pitting corrosion and crack corrosion. Therefore, alloy 20 has the name of anti-corrosion alloy; it has a wide range of applications: such as: chemical, food, medicine, power production and plastics industries will use it. For resistance to pitting corrosion and chloride corrosion, stress corrosion cracking problems, etc., alloy 20 is often used.

The grade mark consists of the grade symbol “2H” and the manufacturer’s identification mark.

While chromium is an important alloying agent in a335 P91 piping, it is known to prevent corrosion and has a high resistance to oxidation at high temperatures. Since these pipes are surface treated or coated, they are also protected against corrosion. Surface coating can be accomplished by various techniques such as passivation, phosphating, oil immersion, varnishing and shot peening.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.19
Material Alloy Steel ASTM A333 Grade 3, Grade 6,Grade 8,Grade 9
ASTM A335 P5,P9,P11,P12,P22,P91,P150

The size of these forgings range from ? NB to 250 NB and length of these forgings is 2mm to 40mm.

Our 4310 seamless pipes implement strict quality specifications and strictly follow every level of production. So this allows us to take our quality goals to a higher level. Every product is tested to national and global quality standards. In addition, we also provide customers with specific tests according to their application requirements.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.39

ASTM specifications recommend a minimum Charpy impact value for ASTM A320 L7 Stud Bolts to be 20-ft-lbf @ -150F. The Charpy impact test determines the total amount of energy that is absorbed by a material during fracture, thereby indicating the material¡¯s notch toughness.

High alloy steel and low alloy steel are two types of alloy steel. Low-alloy steel pipes consist of pipes with an alloying percentage of less than 5%. The alloy content of high alloy steels varies from 5% to about 50%. Similar to most alloys, the working pressure capacity of alloy steel seamless pipe is about 20% higher than that of welded pipe.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.64

WPHY 52 chemical composition are known for accurate dimension, corrosion resistance and their durability.

Alloy Steel Flanges, Alloy Flanges are carefully designed using current technology under the visionary guidance of accomplished professionals in the manufacturing sector.

ASTM A193 Grade B7 Heavy Duty Hex Head Bolts are high strength fasteners made from heat treated alloy steel AISI 4140/4142 quenched and tempered.

A335 P91 material, we use ASTM A335 Gr P91 Welded Pipe
Heat treatment method to standardize the strength of the material. 9% chromium and 1% molybdenum make the pipe strong and corrosion resistant. The material is resistant to wear and high temperature creep. ASTM A335 P91 pipe does not deteriorate, reduces thickness, and has higher creep strength. Pipeline applications are primarily used in power generation, petrochemical, heater and reheat liners, boilers, and petroleum services.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.58

We offer a variety of ASTM A182 F12 alloy steel round bars to choose from, and these forged bars can be customized according to customer requirements. They are widely used in automotive and other fields due to their excellent quality and unparalleled functionality.

ASTM A193 Grade B7 is the standard material specification for chromium-molybdenum alloy steel fasteners for high-strength, high-temperature, and special-purpose applications. Grade B7 is a heat treated chromium molybdenum alloy steel with a minimum tensile requirement of 100 ksi, a yield strength of 75 ksi and a maximum hardness of 35 HRC. The ASTM A193 specification covers requirements for chemical composition, mechanical properties, hardness, heat treatment, and recommended nut washers for Class B7 fasteners. ASTM A193 Grade B7 is the broadest specification for fasteners, commonly found in bolts or pipes, pressure vessels, valves, flanges and fittings.

The high chromium content gives these forgings fittings very good resistance to moisture erosion, which also contributes to their high temperature strength and resistance to scaling at high temperatures.

ASTM 182 is used for pressure systems, including flanges, fittings, and similar parts that conform to specified dimensions or dimensional standards such as ASME codes.

The most common application for A182 F2 round bars is shafts. It has various alloying elements that enhance its mechanical properties.

The flanges also come in B16.5, B16.47 and other standards and dimensions. The Alloy Steel Flange Material can vary according to the chemical composition.

The term “bolting material” as used in this specification covers, rolled, forged or strain hardened bars, bolts, washers, screws, studs and stud bolts.