sanitary stainless steel pipe fitting tee manufacturer

Alloy 800 is an iron-nickel-chromium alloy with moderate strength and good resistance to oxidation and carburization at elevated temperatures.

Duplex fittings are used in different types of piping applications. 2205 is a standard duplex steel with 21% chromium. The material is strong, twice as strong as austenitic steel types. Different standards such as ASME B16.9, B16.28 and B16.25 govern the dimensions. Depending on the type of fitting, the nominal bore diameter of the fitting can also vary.

The A420 Grade WPL6 fitting is used in pipelines in the paper and pulp industries, condensers, sea water, marine engineering, waste water management and pollution control systems.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

Inconel 718 Fitting (UNS N07718) is a chromium-nickel-molybdenum alloy considered resistant to a wide range of severe corrosive environments, crevice corrosion and pitting corrosion. Inconel 625 Fitting (UNS N06625) is an oxidation and corrosion resistant nickel alloy with excellent water corrosion resistance and high strength. Inconel 601 Fitting (UNS N06601) is a nickel-chromium alloy used for functions requiring heat and corrosion resistance.

ASME B366 Incoloy 800 Elbow resists water corrosion at moderate temperatures.

Our offered SS 904L Buttweld Elbow contains a low carbon austenitic nickel-chromium stainless steel with additions of molybdenum and copper.The Stainless Steel 904L Pipe Fittings are mainly used in the chemical industries, utility scrubber assemblies, etc.

One of the major concerns about the SS 304 Fitting is its low cost compared to other high end alloy material counterparts.All A403 gr WP304 Buttweld Elbow and 304 Pipe Fittings should experience heat-treatment.

The heat-affected weld zones have reduced precipitation of carbides and other phases to ensure uniform corrosion resistance.

We also produce Carbon Steel ASTM A234 WPB Threaded elbows with all male connections, all female or a combination of each.

ASTM A403 WP304 pipe fittings mean the pipe fittings which material is Wrought Austenitic Stainless grade A403 WP304,they are used for the pressure piping systems of moderate and high temperature services.ASTM A403 is the standard of pipe fittings material,it indicates the materials properties of different kinds of stainless steel,WP304 is one of the steel grade in this standard

The tensile strength of this superalloy is 690 MPa, while its yield strength measures 275 MPa.

These elbows provide good service in harsh environments. The elbow is used to change the flow direction of the medium by 30 degrees.

We can produce high quality stainless steel elbow Duplex stainless steel UNS S32750 elbow 90deg super duplex stainless steel UNS S32750 elbow 45deg super duplex stainless steel UNS S32750 elbow Long Radius super duplex stainless steel UNS S32750 elbow Short Radius super duplex stainless steel UNS S32750 elbow

This modification was to control carbon (.05-.10%) and grain size to optimize stress rupture properties. Incoloy 800HT has further modifications to the combined titanium and aluminum levels (.85-1.20%) to ensure optimum high temperature properties.

Stainless steel such as 304 and 316L casting of pipe fittings requires low maintenance and does not need an additional coating, in both indoor and outdoor applications. The expected lifetime of a stainless steel pipe fitting is more than 50 years, reducing system down time, replacement and maintenance costs over the life of the installation.

Stainless steel 304 pipe fittings contain both chromium 18% – 20% and nickel 8% – 10.5%. It is an austenitic stainless steel and is less electrically and thermally conductive than carbon steel. It is a component that helps in change the direction of the flow such as tees and pipe bends.

we are traders of we are manufacturer of pipe fittings, stainless steel pipe fittings, stainless steel erw pipe fittings, stainless steel seamless pipe fittings, stinless steel welded pipe fittings, stainless steel buttweld pipe fittings, stainless steel 304 pipe fittings, stainless steel 304L pipe fittings, stainless steel 310 pipe fittings, stainless steel 316 pipe fittings, stainless steel 316L pipe fittings, stainless steel 321 pipe fittings

Duplex 2507 is a super duplex stainless steel designed for applications which demand exceptional strength and corrosion resistance. Alloy 2507 has 25% chromium, 4% molybdenum, and 7% nickel. This high molybdenum, chromium and nitrogen content results in excellent resistance to chloride pitting and crevice corrosion attack and the duplex structure provides 2507 with exceptional resistance to chloride stress corrosion cracking.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

We manufacture ASTM A403 WP 304 elbows, which are corrosion resistant and help prevent internal fluid contamination. Various industries trust this standard because it describes safety and quality.

Alloy 20 was originally developed for use in sulfuric acid service found in facilities such as pulp and paper mills. With good general corrosion properties, Alloy 20 usage has expanded in chemical, petrochemical and power generation plants.

316 and 316L are austenitic alloys, which means that these stainless steel products achieve corrosion resistance through the use of iron carbide or a non-magnetic solid solution of carbon in iron during the manufacturing process. Compared to chromium-nickel austenitic stainless steels, 316L stainless steel has higher creep, rupture stress and tensile strength at elevated temperatures.

SS 316L, the low carbon version of SS 316 and is immune from sensitisation (grain boundary carbide precipitation).

An elbow is a flexible component that allows changing directions in a piping system. Elbow is divided into two groups of long radius and short radius, which can be changed by 45 degrees, 90 degrees and 180 degrees. Elbows can be classified based on distance, which changes in direction from the centerline to the opposite face of the component. Also called center distance. Opposite the center for long radius elbows is the 1.1/2 X nominal pipe size, while for short radius elbows it is the same as the nominal pipe size.

CS ASTM A420 WPL3 Pipe Fittings are combines Good ductility, High strength, Tensile strength, Yield strength, Fatigue resistance, Toughness, Wear resistance and Outstanding corrosion resistance qualities.

These stainless steel 310S butt welded pipe fittings are used in a variety of applications such as oven fixtures, furnace parts, heat treating chambers, hydrogenation parts, jetting parts, and more. These SS 310S butt weld fittings are also primarily used in the chemical, construction and plumbing industries.

The resistance of the Monel 2.4360 eccentric/concentric reducer to salt solutions and its excellent resistance to stress-related corrosion cracking make the Monel 2.4360 eccentric/concentric reducer ideal for surviving in most freshwater bodies.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

Grade 1.4404 or 316L is an austenitic stainless steel AISI 316 with very good corrosion resistance due to its high chromium and molybdenum content and low carbon content. Its strength in the hardened state is about 600 MPa for large diameters, but for small sections, the strength can be increased by cold working.