seamless carbon/alloy steel pipes

Nilo / Alloy K W.Nr.: 1.3981
UNS: K94610 ASTM F15
Fixed-expansion glass-encapsulated iron-nickel-cobalt alloys, Kovar alloys, have a linear thermal expansion coefficient similar to that of hard glass within a certain temperature range
For mating sealing with hard glass

Common Trade Names: Nickel Alloy 36, Invar 36®, Nilo 6®, Pernifer 6®
Invar 36® is a nickel-iron, low expansion alloy that contains 36% nickel, Invar 36 has a low coefficient of expansion from cryogenic temperatures to about +500°F (260°C).
Invar 36 Tube OD:0.2-6mm, WT: 0.02-2mm

Nilo Alloy 36, W.Nr 1.3912, Invar 36® is a nickel-iron, low controlled expansion alloy that contains 36% nickel and possesses a rate of thermal expansion approximately one-tenth that of carbon steel.
Invar 36 Specifications: UNS K93600, W.Nr 1.3912

ASTM A193 Grade B7M bolts and studs have the same chemical composition as Grade B7 (quenched and tempered medium carbon alloy steel) but have lower strength requirements requiring 100% hardness testing on all fasteners manufactured in the batch. Grade B7M bolts are resistant to chloride, sulfide and hydrogen stress corrosion cracking (SCC) and are often used in sour gas service.

Although acceptable fouling levels are considered beneficial to the alloy, in moderate cases, fouling deposits on Astm A182 F9 flange surfaces can act as a barrier to excessive corrosion. When flanges are produced using specification ASTM A182, they work well at high temperatures, albeit in applications with high pressure.

It has chemical composition, such as nickel, nickel-chromium, molybdenum, chromium-molybdenum steels etc.

We offer a wide range of ASTM A335 P9 alloy steel seamless pipes using high quality raw materials. These alloy steel P9 ERW tubes are forged between 2250¡ãF/1750¡ãF (1230¡ãC/955¡ãC) for 30 minutes per inch of billet or ingot section thickness. These are A335 P9 pipes manufactured to international quality standards. These alloy steel P9 seamless pipes are also available in different sizes, grades, thicknesses and specifications according to customer requirements.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.19
Material Alloy Steel ASTM A333 Grade 3, Grade 6,Grade 8,Grade 9
ASTM A335 P5,P9,P11,P12,P22,P91,P141

Alloy steel is steel that is alloyed with a variety of elements in total amounts between 1.0% and 50% by weight to improve its mechanical properties. Alloy steels are broken down into two groups: low alloy steels and high alloy steels. The difference between the two is disputed. Smith and Hashemi define the difference at 4.0%, while Degarmo, et al., define it at 8.0%.[1][2] Most commonly, the phrase “alloy steel” refers to low-alloy steels.

Seamless steel tubes in ASTM A333, reheated and controlled at temperatures for hot working and hot finishing operations to finishing temperatures ranging from 845 to 945¡ãC [1550 to 1750¡ãF] and cooled in air or in air. Controlled atmosphere furnaces from initial temperature over 845¡ãC [1550¡ãF]. For ASTM A333 Grades 1, 6, and 10 Seamless Steel Pipe, heat treatment can be performed from a uniform temperature in excess of 815¡ãC [1500¡ãF], then quenched in liquid and reheated to the appropriate tempering temperature, this heat treatment ASTM A333 4.3.1 The above treatment scheme can also be replaced.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.54

These continuous ¨C annealing furnaces in Alloy Steel Grade F12 RTJ Flanges are usually heated by gas ¨C fired radiation tubes in order to separate combustion gases from the inert atmosphere surrounding the strip. Alloy Steel F12 Flanges has applications in many industries such as petrochemical, oil and gas, bulk liquid transportation, pharmaceuticals, chemical, pulp and paper manufacturing, power generation, textiles and others.

The Alloy Steel F12 Flanges are also very strong due to the annealing of them. Grade F12 Flanges can be supplied in either normalized or quenched and tempered conditions. Alloy Steel F12 Weld Neck Flanges is appropriate to various applications where its different remarkable characteristics are sought-after but a brushed/polished finish is not necessary.

ASTM A182 Grade F2 is an alloy steel used for preliminary forming into forged products. The properties cited apply to the annealing conditions. F2 is the ASTM designation for the material. K12122 is the UNS number.

These ASTM A182 Alloy Steel F12 Flanges are manufactured from high quality raw materials, so the manufactured products are of high quality. Additionally, these ASTM A182 Alloy Steel F12 Flanges are manufactured with the necessary standards, codes and guidelines in mind, resulting in a high quality product.

The thickness and the inner diameter of the flange will be as per the size of the pipe for which this welding neck flange is being made.

While each variation of Inconel has unique traits that make it effective in different circumstances, the majority of the alloys are used frequently in the chemical industry.Its welding characteristics,
especially its resistance to postweld cracking, are
outstanding

ASME SA 335 P91 Alloy Steel Pipe also has some other great features like low maintenance, efficient work, high demands, etc. We offer a range of ASTM A335 P91 alloy steel pipes for a wide range of applications in various industries.

INCONEL? alloy 718 (UNS N07718/W.Nr. 2.4668) is a high-strength, corrosion-resistant nickel chromium material used at -423¡ã to 1300¡ãF. Inconel alloys are resistant to oxidation and have the ability to maintain its structural integrity in high temperature atmospheres.

While the term alloy steel could even apply to stainless steel grades, the ASTM specification or ANSI standard used to produce the Alloy Steel Flanges would give the buyer details regarding the chemistry details of these products.

Alloy 20 (Alloy 20) is an iron-based austenitic alloy developed to resist sulfuric acid corrosion. It has excellent resistance to sulfuric acid corrosion; it has strong resistance to phosphoric acid, nitric acid and chloride environments, chloride stress corrosion, pitting corrosion and crack corrosion. Therefore, alloy 20 has the name of anti-corrosion alloy; it has a wide range of applications: such as: chemical, food, medicine, power production and plastics industries will use it. For resistance to pitting corrosion and chloride corrosion, stress corrosion cracking problems, etc., alloy 20 is often used.

A387 Chrome Molybdenum Steel Sheet Uses & Applications Due to the key properties of the alloy, chrome molybdenum steel sheet is popular in onshore and offshore production facilities in the oil and gas industry. It is also widely used in the energy industry as a key component in power plants. It can be found in boilers and pressure vessels, heat exchangers, flanges, fittings and valves, pipes and pipe supports.

Alloy steel round bar is a long cylindrical alloy bar stock that has many industrial and commercial applications.

The addition of molybdenum strengthens the elastic limit of the A335 p11 welded pipe and increases its temperature strength. In addition to these properties, there is a reduction in brittleness and an improvement in the weldability and hardenability of the pipe.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.48

In applications where higher working pressures are a prerequisite, the use of seamless pipes is justified. Although stronger than welded pipe, the cost is much higher. In addition, in welded products, there is a greater risk of intergranular corrosion in the heat-affected weld zone. The obvious difference between alloy steel welded pipe and seamless product is the transverse seam along the length of the pipe
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.19
Material Alloy Steel ASTM A333 Grade 3, Grade 6,Grade 8,Grade 9
ASTM A335 P5,P9,P11,P12,P22,P91,P128

Alloy steels are used in boiler construction because they are inexpensive, readily available, easy to form and weld into desired shapes, and, in a wide range, have sufficient resistance to oxidation and corrosion to provide many industries with years of satisfaction service. Alloy steels are used in a range of demanding applications in the aerospace and power (nuclear) industries. Alloy steels are also found in applications where their response to magnetism is important, such as in transformers and electric motors.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.48

Our alloy steel ASTM A182 F5 butt weld flanges can be used in auxiliary industrial high pressure services such as condensers, boilers, evaporators, heat exchangers and more.

Alloy Steel Threaded Flanges are widely demanded as pipe flanges i.e called as threaded flanges which is useful in different industrial applications. It is also known as screwed flange and it has a thread inside the flange bore which fits on the pipe with matching male thread on the pipe.

Which means that one has to know if the alloy steel flange material is critical to achieving good weld integrity and the need for proper filler metal selection.High heat resistance steel grades are generally known as Chromium Molybdenum Steel.

ASTM A194 bolts include metals such as manganese and silicon, with additions of phosphorus, sulfur, and carbon. ASTM A194 gr 2h bolts are suitable for high pressure or high temperature service, or both. Further machining is possible by centerless grinding or cold drawing.

Shaped flanges made by die forging or precision (lost wax) casting, depending on the mechanical properties of the flange, die forged flanges have higher strength than cast flanges. Precision profiled flanges manufactured by forging or casting require a model (tool).

ASTM 182 is used for pressure systems, including flanges, fittings, and similar parts that conform to specified dimensions or dimensional standards such as ASME codes.

Fasteners made from this austenitic stainless steel require carbide solution treatment of the bar to be threaded, or carbide solution treatment after the head operation of bolts with forged heads.

The composition of the chrome-molybdenum alloy steel pipe in A335 makes it ideal for power plants, refineries, petrochemical plants and oilfield services that transport fluids and gases at extremely high temperatures and pressures.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.19
Material Alloy Steel ASTM A333 Grade 3, Grade 6,Grade 8,Grade 9
ASTM A335 P5,P9,P11,P12,P22,P91,P119

Gold Steel P91 of A335 EFW Pipe is an austenitic compound whose elasticity and creep strength can be improved by cold working. These pipes are widely used in oil and gas, power plants, shipbuilding, heavy engineering and other industries. All products meet or exceed industry standards of API, ASTM, ASME, ANSI and other national and international standards.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.19
Material Alloy Steel ASTM A333 Grade 3, Grade 6,Grade 8,Grade 9
ASTM A335 P5,P9,P11,P12,P22,P91,P122