Semi Finished Forged Flange A182 F9 WN Flange uses include pipes and structures

Nilo / Alloy K W.Nr.: 1.3981
UNS: K94610 ASTM F15
Fixed-expansion glass-encapsulated iron-nickel-cobalt alloys, Kovar alloys, have a linear thermal expansion coefficient similar to that of hard glass within a certain temperature range
For mating sealing with hard glass

Common Trade Names: Nickel Alloy 36, Invar 36®, Nilo 6®, Pernifer 6®
Invar 36® is a nickel-iron, low expansion alloy that contains 36% nickel, Invar 36 has a low coefficient of expansion from cryogenic temperatures to about +500°F (260°C).
Invar 36 Tube OD:0.2-6mm, WT: 0.02-2mm

Nilo Alloy 36, W.Nr 1.3912, Invar 36® is a nickel-iron, low controlled expansion alloy that contains 36% nickel and possesses a rate of thermal expansion approximately one-tenth that of carbon steel.
Invar 36 Specifications: UNS K93600, W.Nr 1.3912

ASTM A335 has added chromium and molybdenum elements and has good tensile strength, good high temperature and corrosion resistance.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.19
Material Alloy Steel ASTM A333 Grade 3, Grade 6,Grade 8,Grade 9
ASTM A335 P5,P9,P11,P12,P22,P91,P92

Carbide solution treatment, also known as solution annealing, is a process in which fasteners or stainless steel rods are heated and then water quenched to ensure maximum corrosion resistance. A193 Grade B8 Grade 2 bolts are strain hardened after carbide solution treatment to improve strength properties and reduce the potential for wear.

ALLOYS STEEL SA 182 F9 BAR is a ferritic alloy steel bar, other contents are also considered. These bars are steel forged bars held at high temperature and pressure.

This is used in fabrication of tubes, boilers and super heaters. On many other applications, this is used and is available in various other sizes and shapes.

Commercially pure wrought Nickel with good mechanical properties over a wide range of temperature and excellent resistance to many corrosives, in particular hydroxides.

Good resistance to corrosion in acids and alkalis and is most useful under reducing conditions. Outstanding resistance to caustic alkalis up to and including the molten state. In acid, alkaline and neutral salt solutions the material shows good resistance, but in oxidizing salt solutions severe attack will occur. Resistant to all dry gases at room temperature and in dry chlorine and hydrogen chloride may be used in temperatures up to 550C. Resistance to mineral acids varies according to temperature and concentration and whether the solution is aerated or not. Corrosion resistance is better in de aerated acid.

A335 steel pipe can be used in NACE applications at high temperature and high pressure in sour environments, can be used in NACE-MRO 175 Sour Service, ideal for creep rupture applications, can handle high temperatures with very low elasticity.

ASTM A335 is the standard specification for seamless ferritic alloy steel pipe for high temperature service. Covers server levels: P1, P2, P5, P5b, P5c, P9, P11, P12, P15, P21, P22, P23, P91, P92, P122, of which P5, P9, P11, P22, P91, P92 are used in practice the most extensive. This specification covers nominal and minimum wall chrome-molybdenum (also known as Cr-Mo or Cr-Moly) alloy steel pipes for high temperature applications. Pipe ordered to this specification shall be suitable for bending, vanstoning and similar forming operations, and fusion welding. ASTM A335 P11, P22, P91 and P92 are commonly used in power plants and the chemical and petrochemical industries, while P9 and P5 are mainly used in oil refineries.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.19
Material Alloy Steel ASTM A333 Grade 3, Grade 6,Grade 8,Grade 9
ASTM A335 P5,P9,P11,P12,P22,P91,P106

For A335, chromium is a key ingredient used to make stainless steel. If the chromium content is above 12%, it can be classified as stainless steel. Even at high temperatures, the antioxidant potential of chromium is irreplaceable. Better hardness, tensile strength and yield strength at standard temperature. Due to the material’s composition, it is ideal for use in power plants, refineries, petrochemical plants and other oilfield services involving high temperature and high pressure transportation.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.19
Material Alloy Steel ASTM A333 Grade 3, Grade 6,Grade 8,Grade 9
ASTM A335 P5,P9,P11,P12,P22,P91,P108

The flanges can be threaded, ring type joint, lap joint, weld neck or socket welded.

Besides these elements the addition of trace amounts of both Manganese and silicon, other set of common alloying elements, provides the alloy steel threaded flanges with excellent deoxidizing capabilities.

ASTM A182 F11 flange has various dimensions and sizes such as 1/2″ to 36″. This is used in class like 150#, 300#, 600# and many more.

ASTM A194 Class 2h bolts are carbon base steel heavy duty hex nuts. Sa194-2h material is a common high strength nut. This specification ASTM A194 Class 2h washers are typically used in conjunction with the following fastener standards – A193 Class B7, A325, A490.

A193 Grado B7 es el tama?o de empernado mas utilizado, ademas de las tuercas A194 Grado 2H se utilizan para empernar tuberias de acero al carbono. Los pernos A193 B7 estan disponibles en tama?os metricos de M6 a M180 y tama?os imperiales de 1/4 a 7 pulgadas de diametro.

Alloy C276 (UNS designation N10276) is a nickel-molybdenum-chromium-iron-tungsten alloy
known for its corrosion resistance in a wide range of aggressive media.

ASTM 182 is use in pressure systems, Included are flanges, fittings and similar parts to specified dimensions or to dimensional standards, such as the ASME specifications. 182 F5 Cl2 Alloy Steel Flanges are well suited to not only high temperature but also high pressure or a combination of both these applications.

They have a minimum yield strength of 105ksi. There are different types of bolts and bolts for different types of applications such as ASTM A193 gr b7 hex bolts.

Pipe Fittings are usually socket welded or threaded. The high chromium content gives these forgings fittings very good resistance to moisture erosion

A335 P9 seamless pipe is a type of chrome molybdenum pipe listed in ASTM A335 (ASME S/A335, Chrome-Moly), which has become the standard in the power generation industry and petrochemical industry, not only because of its tensile strength, corrosion resistance resistance and high temperature strength, but also because of its cost-effectiveness. Chromium molybdenum tubes are popular in P grades P5, P9, P11, P22, P91 and P92. The P11, P22 and P91 grades are most commonly used in the powder industry and petrochemical plants, while the P5 and P9 grades are often used in oil refineries.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.66

Which means that one has to know if the alloy steel flange material is critical to achieving good weld integrity and the need for proper filler metal selection.High heat resistance steel grades are generally known as Chromium Molybdenum Steel.

Stainless steel is a versatile alloy is considered to be amongst the most widely used metals across the world.Stainless Steel A403 WP304 contains higher chromium and low carbon content.

ASME SA 335 P11 pipe is a pipe made of chrome molybdenum alloy. It is used for high temperature service. It is corrosion resistant, strong and malleable.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.53

These ASTM A182 alloy steel F12 flanges are corrosion resistant. ASTM A182 alloy steel F12 flanges also have high dimensional accuracy.

Alloy steel sounds like: steel that contains a specific amount of alloying elements. Generally, alloying elements make steel stronger and more resistant to shock or stress. While the most common alloying elements include nickel, chromium, molybdenum, manganese, silicon and copper, many other alloying elements are also used in the production of steel.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.42

We are also a supplier and exporter of Alloy Steel ASTM A182 F5 Butt Weld Flanges for high pressure hydraulic systems.

ASTM A335 P91 Welded Pipe, A335 P91 Pipe Gauge Alloy Steel Pipe is suitable for bending and similar forming operations, as well as fusion welding in high temperature service. We stock ASTM A335 P91 Seamless Pipe (HFS), ASME SA Gr.P91 Pipe and Gas Cylinders in a wide range of sizes with divider thicknesses up to 100mm.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.19
Material Alloy Steel ASTM A333 Grade 3, Grade 6,Grade 8,Grade 9
ASTM A335 P5,P9,P11,P12,P22,P91,P135

ASTM A182 refers to low-alloy steel forgings. It belongs to carbon steel.

Compared to other manufacturing process, ASTM A182 F22 Metal forging is mainly focused on producing some of the strongest manufactured parts. It¡¯s not just limited to iron and steel forging but as well as other metals also.

Imperative for the uniqueness of Alloy Steel F9 Socket Weld Flanges is the allotropy of iron-that is, its existence in two crystalline structures. Alloy Steel(AS) F9 Long Weld Neck Flanges can be carbide of an alloying element such as titanium.

The connection between two pipes can be directly welded together, but it is difficult to connect together without welding. When the connection part have problems, it will be hard to repair. The same problem also happened between pipe and valve connection.

Blind flanges can also be used to seal a nozzle opening on a pressure vessel.