Sockolet and Flange Packing Shipping Picture

It is widely used in offshore oil and gas exploration/production and in heat exchangers in petrochemical/chemical processing.

Higher chromium, molybdenum and nitrogen content results in a Pitting Resistance Equivalent Number (PREN) > 40, providing superior pitting and crevice corrosion capabilities to austenitic and duplex stainless steels in virtually all corrosive media, and critical pitting temperature Above 50¡ãC .

ASTM A240 Type 2205 Plate is a duplex stainless steel plate that is used extensively in various industries such as chemical processing, oil and gas exploration, and marine engineering. SA 240 GR 2205 Sheet is made from grade 2205 stainless steel, which is a combination of ferritic and austenitic steel.

A789 UNS S31803 and UNS S32205 are two grades of duplex stainless steel that are widely used in various industrial applications. These Duplex S31803 Seamless Pipes are known for their excellent corrosion resistance, high strength, and good weldability. A789 is a specification that covers seamless and welded tubes made from duplex stainless steel.

The flanges shall not be used at temperatures over 600¡ãF [315¡ãC] since it may be subject to embrittlement after service at moderately elevated temperatures.

Duplex 2205 bolts are among the most commonly used duplex grades. These are called standard duplex steel fasteners. There are different types of fasteners such as studs, bolts, nuts, screws, etc. Duplex stainless steel fasteners are used in chemical processing, transportation, storage, oil and gas, marine, paper and pulp, wine and many other industries. A wider range of applications is possible due to the combination of corrosion resistance, high temperature capability and high pressure resistance of Duplex Steel 2205 Nuts and Bolts.

We are a manufacturer of Stainless Steel Round Bar, Formed Steel and Rebar, we supply bars such as 304, 304l, 316, 316l and 347. We are proud to have the largest share of stainless steel forming steel in the country.

From corrosion resistance to strength, businesses around the world appreciate these properties of 2507 Super Duplex Seamless. Due to the dual microstructure phase, the weldability of this alloy is classified as good, which is why a relatively robust and durable super duplex welded pipe can be achieved.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.41

Super Duplex UNS S32760 Round Rod has many properties and properties due to the elements present in the chemical composition. Due to these characteristics and properties, these super duplex UNS S32760 round bars are used in a large number of industrial applications.

Duplex stainless steels have a microstructure which is 50% ferritic and 50% austenitic. This composition gives them a better strength than either ferritic or austenitic steels. Further details about this topic are given below (see ASTM A790 pipes).

Compared to conventional stainless steels, duplex steel pipes guarantee higher resistance to pitting and stress corrosion cracking. Meanwhile, our ASTM A 789/A 790 Duplex Steel Pipes and Tubes are available in different sizes, gauges and thicknesses according to customers’ customized requirements.

2205 Duplex nuts are the most widely used duplex stainless steel 2205 fasteners and feature a high yield strength that is twice that of standard austenitic stainless grades.

Duplex 2205 stainless steel (ferritic and austenitic) is widely used in applications requiring good corrosion resistance and strength.

The flange is second most used joining method after selding. Flanges are used when joints need dismantling. It provides flexibility for maintenance. Flange connects the pipe with various equipment and valves. Breakup flanges are added in the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrdlated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls are required in the selection and application of all there elements to attain a joint, which has acceptable leak tightness.
A flange is a protruded ridge, lip or rim, either external or internal, that serves to increase strength (as the flange of an iron beam such as an I-beam or a T-beam); for easy attachment/transfer of contact force with another object (as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera); or for stabilizing and guiding the movements of a machine or its parts (as the inside flange of a rail car or tram wheel, which keep the wheels from running off the rails). The term “flange” is also used for a kind of tool used to form flanges.

The yield strength of this alloy is about 570 MPa. In addition to strength, A240 S32750 Super Duplex Plate is an alloy that provides the best resistance to crevice and pitting corrosion.

Duplex stainless is a mixed microstructure of austenitic and ferrite (50/50) which has improved strength over ferritic and austenitic steel grades with similar corrosion resistance qualities.

Duplex stainless steel pipes and fittings are generally less expensive because of the lower proportions of alloying elements used in the manufacture of duplex stainless steels. Compared to austenitic stainless steels, duplex stainless steels have higher yield strengths, so users can buy duplex pipes and duplex pipe fittings in relatively lower thicknesses.

ASTM A182 Super Duplex F55 Hex Bolts is used for Pumps, valves, chokes, Connectors, Pipework/flanges, Oil & Gas components, Manifolds, etc. The resulting savings in weight of ASME SA 182 Super Duplex S32760 Hex Bolts can dramatically reduce the overall cost of fabrication. Anneal Heat this ASME SA479 Super Duplex S32760 Hex Bolts to 1025 Degree C ¨C 1120 Degree C ensuring sufficient time is allowed for the centre to achieve furnace temperature and hold for a time commensurate with the ruling section, followed by water quenching.

This heat treatment performed on the Duplex 2205 Pipe must be keeping with accordance to the specified temperature and quench conditions.

Duplex 2205 nuts and nuts are widely used in applications requiring good corrosion resistance and strength in marine and harsh environmenuts.

Another advantage of grade 304 stainless steel bar over grade 303 is that it is slightly harder and has better corrosion resistance. Because of this, grade 304 stainless steel bar is used in large quantities in the manufacture of fasteners and fixtures such as nuts, bolts, washers, clips, fittings and clamps. Products made from grade 304 stainless steel in the fastener industry are often referred to as “A2”.

2205 stainless steel sheet has high tensile stress and low thermal expansion and can be used in cargo holds, trucks and ships as sheet.

In the annealed condition, S31803 contains approximately 40-50% ferrite. S31803 is often referred to as the workhorse grade and is the most widely used grade in duplex stainless steel pipes. The use of S31803 stainless steel pipe should be limited to temperatures below 600¡ãF.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.64

They have a design that allows for the pipes to pass through the flange and locate the correct point for connection. The ASTM A182 grade F53 WNRF Flange has a welded neck raised face.

The flange is second most used joining method after selding. Flanges are used when joints need dismantling. It provides flexibility for maintenance. Flange connects the pipe with various equipment and valves. Breakup flanges are added in the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrdlated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls are required in the selection and application of all there elements to attain a joint, which has acceptable leak tightness.
A flange is a protruded ridge, lip or rim, either external or internal, that serves to increase strength (as the flange of an iron beam such as an I-beam or a T-beam); for easy attachment/transfer of contact force with another object (as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera); or for stabilizing and guiding the movements of a machine or its parts (as the inside flange of a rail car or tram wheel, which keep the wheels from running off the rails). The term “flange” is also used for a kind of tool used to form flanges.

La tuberia ERW se usa en aplicaciones que requieren una soldadura extensa para la instalacion. Los usos de la tuberia duplex ASTM A790 UNS S32205 no se limitan a aplicaciones industriales, tambien se pueden ver en aplicaciones domesticas de bajo costo.

The yield strength of this material is almost two times that of the usually used austenitic stainless steel grade.

It is alsohighly resistant to inorganic acids, especially if they contain chlorides.

Due to the alloy’s very high mechanical strength, dual-phase fastener manufacturers can reduce the weight of their designs by thinning the cross-section of the final product, proving a cost-saving alternative to other grades of stainless steel.

Zeron 100 is highly resistant to corrosion in a wide range of organic and inorganic acids. The copper content gives excellent resistance to corrosion in many oxidising acids. This alloy is also highly resistant to strong alkalis.

The advantages of duplex steels include: good weldability and machinability, high resistance to corrosion fatigue, resistance to stress corrosion cracking (especially chloride stress corrosion cracking), erosion and high energy absorption.

The combination of chromium, molybdenum and nitrogen give Duplex 2205 flanges good protection from chloride pitting and crevice corrosion, which makes them useful for marine environments, brackish water, bleaching operations, closed loop water systems and some food processing applications.

The steel has excellent resistance to chloride stress corrosion cracking, high thermal conductivity, and a low coefficient of thermal expansion.

2507 is used for oil and gas industry equipment, offshore platforms, heat exchangers, process and service water systems, fire-fighting systems, and injection and ballast water systems.