sockolet connections

For industrial purposes, in pipeline systems, we usually need to change the direction of transmission; regulate the flow of fluids (oil and gas, water, mud); open or close pipelines, etc. Therefore, to accomplish these activities, steel pipe fittings will be applied.

They can be either cold or hot rolled in different shapes to suit various applications.

Equal cross, generally for the professional term, four for pipe fittings, pipe connectors, used in the main pipeline to branch pipe.

Nickel is so important that nickel-containing grades make up 75% of stainless steel production. The best-known of these are Type 304, which has 8% nickel and Type 316, which has 11%.

At elevated temperatures, the annealed and solution annealed alloys exhibit good oxidation resistance and high strength.

Steel pipe fittings are made of carbon or alloy steel pipes, sheets, profiles, and have a shape that allows them to function (change the direction or rate of fluid) in a piping system. These accessories mainly include steel elbows (45 or 90 degree bends), tees, reducers (concentric or eccentric reducers), crosses, caps, pipe joints, flanges, gaskets, studs, etc.

Global Supplier of ANSI B16.9 90 Deg Pipe Fittings Elbow, Buttweld Elbow 90 Degree, Butt Weld Long Radius 90 Degree Elbows, Stockist of Stainless Steel 90 Deg. Elbow, 90 degree Short Radius Elbow Dealer in China, ASME B16.9 90 deg Long Radius Elbow, Schedule 10 90 Degree Elbow.

Unions Fittings are similar to Couplings. Manufactured as per ASME B16.11, ANSI B16.9, BS 3799 Standards. Socket weld Union and Threaded Unions are available in stock. Alloy 20 Union, Carpenter 20 Union and Incoloy 20 Union is in ready stock with Siddhagiri Metals and Tubes.

ASTM A182 F91 is an American standard Martensite type heat-resistant steel forgings, according to ASTM A182-2016.

The length of the pipe nipple is usually specified by the overall length with threads. It may have a hexagonal section in the center for the wrench to grasp (sometimes referred to as a ¡°hex nipple¡±), or it may simply be made from a short piece of pipe (sometimes referred to as a ¡°barrel nipple¡± or ¡°pipe nipple¡±).

Cooling units in many desalination plants and power plants use seawater to keep equipment cool, but salt water is a problem and can cause corrosion in pipes. This can be solved using ASTM B171 Copper Nickel Forged Fittings which are environmentally friendly and easy to assemble without any threaded or bolted connections and no corrosion in the pipe.

We produce 90/10 Cu-Ni butt welded pipe fittings that are easy to weld, easy to manufacture and inherently resistant to biofouling.

INCONEL alloy 625 is designated as UNS N06625, Werkstoff Number 2.4856 and ISO NW6625 and is listed in NACE MR-01- 75.

Inconel 800 forms a thick yet stable oxide layer. This thick layer is known to protect the outer surface of the Inconel 800 component from further attack.

The alloy also exhibits resistance to physical deterioration, e.g. – surface pitting and cracking.

Flanges, fittings, valves and various other parts ordered to customer dimension or to industry standards such as MSS, ASME and API specification are included in the scope.

These ASTM A182 alloy steel F5 F9 F11 F12 F22 F91 pipe fittings are corrosion resistant. ASTM A182 alloy steel F5 F9 F11 F12 F22 F91 fittings also have high dimensional accuracy.

A pipe cap, also known as a head, a plug, or a baffle, is a pipe fitting that is welded on the pipe end or installed on the external thread of the pipe end to cover the pipe. It is used to close the pipe, and the function is the same as the pipe plug.

These alloys are widely used in chemical processing, pollution control, evaporator, nuclear reactors, marine industries, and so on.

Stainless steel fittings are made of corrosion-resistant 304 stainless steel for durability and reliability. Suitable for various industrial applications such as vibration, high pressure or corrosive conditions. To improve sealing and reduce wear*, the manufacturer recommends using both Grey Stainless Steel PTFE Thread Sealing Tape and Welded White Seal Plus Multipurpose Fitting Compound.

Typical applications for copper-nickel 70/30 forged fittings are condensers, seawater piping, power plants, exchanger housings, etc. These cupronickel 70/30 fittings can be further customized in thickness and size according to customer specific requirements.

The high chromium content gives these forgings fittings very good resistance to moisture erosion, which also contributes to their high temperature strength and resistance to scaling at high temperatures.

The emphasis of this alloy is placed on the fact that it is more resistant to aggressive forms of corrosion. In particular, Incoloy 800 shows very high resistance to corrosive compounds seen in aqueous environments.

Stainless steel pipe fittings are made of stainless steel, which is an alloy. Stainless steel is highly corrosion resistant and durable. It has low temperature toughness and high temperature resistance. It can be easily manufactured and retrofitted. There are several grades of stainless steel, but the most commonly used grades are 304, 316 and 316L.

In the piping system, stainless steel 304 elbow is a pipe fitting that changes the direction of the pipeline. The chemical composition contained in the stainless steel elbow will keep the surface of the elbow free from rust and corrosion for a long time. According to the angle, the most commonly used are 45¡ã and 90¡ã180¡ã. In addition, according to engineering needs, other abnormal angle elbows such as 60¡ã are also included.

Its typical corrosion applications include titanium dioxide production (chloride route), perchloroethylene synthesis, vinyl chloride monomer (VCM) and magnesium chloride. Alloy 600 is used in chemical and food processing, heat treatment, phenol condensers, soap making, vegetable and fatty acid containers, and more.

Carbon steel forged fittings and flanges are prevalent and common used in industries, the representative material grade is ASTM A105 and A350 LF2/LF3.

HT PIPE is a well-known company that is a pioneer in the production, distribution and export of industrial products such as nickel alloy pacifiers and has made significant progress in the industry.

Alloy 600’s high chromium content makes it significantly more resistant to oxidation than pure nickel, while its high nickel content provides good corrosion resistance under reducing conditions.
This alloy has a high level of resistance to stress and salt water, exhaust gases, and most organic acids and compounds.

A182 F91 Wrought alloy steel tubes, flanges, wrought fittings and valves and other components for high temperature use.

Nickel alloy is a component that contains nickel as a principal element and in higher concentration. It is a solid material that offers wide solubility with iron, chromium, and copper as well. The alloy is present in combined form as well. Nickel alloy is highly versatile and able to sustain heat and corrosion resistance.