solid steel bar A350 LF3 steel bar

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Knowing the finish of these steels can be helpful if your pipes are visible and appearance is on the list of considerations. Stainless steel is usually glossy and can retain that gloss if exposed to weather and other factors. Carbon steel, on the other hand, is darker in color and usually has a matte finish when painted. Unfortunately, it can also rust and look bad if left exposed. Galvanizing is also an option.

We also accept all orders of CS Elbow A234 WPB up to and including 90 degree to suit your requirements.

Flanges are an integral part of processing based industries. Most industries, including the oil and gas, water treatment and nuclear power generation make use of pipes, which permit the flow of media across different factory units

Monel 400 is a popular nickel-copper alloy commonly used in high performance applications. The alloy has high resistance to acidic and alkaline environments, high strength, good ductility and thermal conductivity. Monel 400 is suitable for use in the subzero to 1,000¡ãF (538¡ãC) temperature range and can only be hardened by cold work.

Pressure-Temperature Rating of ASTM A350 Gr. LF3 flanges are identical to ASTM A105 flanges.

Alloy Steel ASTM A234 WP22 Buttweld Fittings are one of the most demanding products among various industries around the world.We are a manufacturer, trader, stockist, supplier and exporter of A234 WPL22 Pipe Fittings which abide by the specifications of ASTM A234, which include wrought Carbon steel as well as Alloy Steel fittings, of seamless and welded construction.

Carbon steel LF3 round bars have the best corrosion resistance to general corrosion.

Carbon steel bolts are one of carbon steel fasteners. There are different types of carbon steel and they all have high hardness. HT PIPE is a leading manufacturer and supplier of carbon steel nuts and bolts and other fasteners.

ASME B16.5 Weld Neck flange dimensions are applicable to all flange materials.

This material provides properties such as resistance to corrosion, excellent durability, and finishing in goods.

The standards are ASME B16.9 and B16.28 and the schedules range from sch5s to XXS.

All SA234 WPB Elbow are manufactured in India and produced from strictly European sourced raw material.

A234 WP9 carbon steel pipe fittings are widely used in many different industries. Alloy Steel A234 Gr. WP9 Buttweld Pipe Fittings are a type of pipe fitting made from carbon steel material, which is strong, durable, and resistant to corrosion. These Alloy Steel WP9 Butt weld Pipe Fittings are commonly used for connecting pipes and fixing them into place. ASTM A234 WP9 Pipe Fittings can be used for both small and large-scale projects, making them incredibly versatile and useful.

The A350 LF2 Class 1 Flange is the most used with class 2 being used in specific applications. The flanges can also be heat treated for hardening. The heat treatment used by manufacturers on the Carbon Steel A350 Lf2 Flanges includes normalizing, tempering, quenching as well as precipitation heat treatment. A350 LF2 Class 1 and class 2 flanges has chemical and many other mechanical properties such as grade class, tensile strength, yield strength, elongation, hardness etc. This is used for higher temperature and thy ear also used for many other industries.

Steel flanges provide an easy access for cleaning, inspection or modification. They usually come in round shapes but they can also come in square and rectangular forms. The flanges are joined to each other by bolting and joined to the piping system by welding or threading and are designed to the specific pressure ratings; 150lb, 300lb, 400lb, 600lb, 900lb, 1500lb and 2500lb.

A flange can be a plate for covering or closing the end of a pipe. This is called a blind flange. Thus, flanges are considered to be internal components which are used to support mechanical parts.

The schedules of the fittings range from 5s to XXS.Fittings over NPS12, produced by locally heating a portion of the fitting stock to any temperature for forming, shall be annealed, normalized, or normalized and tempered. And these fittings inlcudes elbow, tee, reducers, the carbon content shall les than 0.26%. NPS12 under no need to be heat treated under this forming process.

High carbon steel bolts have a carbon content between 0.60 – 1.25%. High carbon steel alloys have manganese content in the range of 0.30 – 0.90%. Of all three grades, high carbon steel threaded rod has the highest hardness and toughness while exhibiting the lowest ductility. The high wear resistance comes from the fact that these screws are almost always hardened and tempered.

Generally speaking, the carbon-free content of carbon steel pipe flanges is lower than that of molten flanges. They don’t oxidize very quickly. They are flat and fairly light in construction, and the fused flanges have excellent mechanical properties. Improper forging methods often result in broad or irregular grains; hardening cracks and forging are taller than cast flanges.

According to different varieties and requirements of pipe fittings, forging pipe fittings mainly adopts die forging, free forging and cutting forming processes.

Steel pipe fitting are made of carbon or alloy steel pipe, plates, profiles, to a certain shape that could make a function (Change the fluids direction or rate) in pipeline systems. Mostly these fittings includes steel elbow (45 or 90 degree bend), tee, reducer (concentric or eccentric reducer), cross, caps, nipple, flanges, gasket, studs and etc.

It covers steel fittings of seamless and welded types. Steel Pipe fittings are applied in pressure pipelines and in pressure vessel fabrications.

The typical hardness of mild steel is Rb70/85. Parts requiring high strength and wear resistance or for use in critical components can be fabricated from high carbon steel or case hardened after fabrication. Chromate coatings can provide corrosion protection. Carbon steel washers are used for fastening in various industries.

ASTM A105 is the most generally utilized carbon steel material grade that used to manufacture forge piping components,

This material should be arranged the charpy V impact test in temperature of -46¡æ, to make sure it can work in a lower temperature service, for example in cold weather, winter or deep-sea water offshore projects.

Components like fittings and Carbon Steel SA105 Pipe Flanges aid in regulating the flow of said media. Unlike fittings, flanges, however, work at a deeper level.

ASTM A105 Forged Fittings for various right industrial solutions. The product to the domestic and global patrons is offered at most attractive rates. The product is manufactured in accordance with various raw materials standard qualities. They are enjoying having a good reputation in the market.

When it comes to connecting different sections of carbon steel pipes, ASME B16.9 A234 WPB Carbon Steel Pipe Butt Welded Fittings are the go-to solution. These fittings are designed to provide a reliable and secure connection, while also ensuring excellent flow through the system.

ASTM A234 specification has many grades, such as WPB, WPC, WP5, WP9 WP11, WP12, WP22, WP91 and so on. There are the pressure grade ASTM A234 WPB Pipe Fittings in 1/2 inches to 24 inches nominal bore sizes with different wall thicknesses that correspond to the schedules.

ASTM A234 is Standard Specification for steel pipe fittings includes carbon and alloy steel material for moderate and high temperature services.The ASME SA 234 Gr WPB Pipe Elbow and other fittings can come in different dimensions according to the ASME/ ANSI B16.9 and B16.28 standards.