stainless pipe 22mm 316 sch 40 only 1 pcs

Nilo / Alloy K W.Nr.: 1.3981
UNS: K94610 ASTM F15
Fixed-expansion glass-encapsulated iron-nickel-cobalt alloys, Kovar alloys, have a linear thermal expansion coefficient similar to that of hard glass within a certain temperature range
For mating sealing with hard glass

Higher chromium, molybdenum and nitrogen content results in a Pitting Resistance Equivalent Number (PREN) > 40, providing superior pitting and crevice corrosion capabilities to austenitic and duplex stainless steels in virtually all corrosive media, and critical pitting temperature Above 50¡ãC .

The 316 stainless steel pipe has become an indispensable material for the industrial sector. This alloy of iron and chrome is recognized for its high resistance to corrosion, as well as its durability. 316 stainless steel tubing can be produced in both seamless and welded tubes to meet specific customer needs.

ASME B36.19M is the standard specification for stainless steel pipes, which specifies the dimensions, tolerance, and manufacturing requirements for both welded and seamless pipes.

Nickel 200 flanges The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment.

Inconel 718 is a nickel-chromium-based alloy that is commonly used in high-temperature applications such as aerospace and gas turbines. One of the most important factors in the production of ASTM B670 Inconel 718 Sheet is the plate rolling process. There are two main types of Inconel 718 plates available on the market: hot rolled and cold rolled plates.

UNS N08367 also commonly referred to as alloy AL6XN is a low carbon, high purity, nitrogen-bearing “super-austenitic” nickel-molybdenum alloy with excellent resistance to chloride pitting and crevice corrosion.

Hastelloy Alloys Directory
The Corrosion Resistant HASTELLOY alloys are widely used by the chemical processing industries. The need for reliable performance leads to their acceptance and growth in the areas of energy, health and environmental, oil and gas, pharmaceutical and flue gas desulfurization industries.

AL6XN is a superaustenitic stainless steel with outstanding resistance to chloride pitting, crevice corrosion and stress corrosion cracking. AL6XN is a 6 moly alloy that was developed for and is used in highly aggressive environments. It has high nickel (24%), molybdenum (6.3%), nitrogen and chromium contents that give it excellent resistance to chloride stress corrosion cracking, chloride pitting, and exceptional general corrosion resistance. AL6XN is primarily used for its improved pitting and crevice corrosion resistance in chlorides. It is a formable and weldable stainless steel.

SMO 254 Pipes can withstand high mechanical stress and Alloy 254 SMO Pipe high pressure work in high temperatures and corrosive environments.

Nickel-copper-based alloy 400 Monel 2.4360 cold drawn rod is virtually immune to chloride stress-related corrosion cracking when exposed to corrosive media in typical environments. Monel 400 is a copper and nickel based alloy that is popular today due to its high performance. The alloy has excellent acid and alkali resistance. In addition, it has good tensile strength, ductility, excellent thermal conductivity, and can be hardened by cold work. Additionally, it can be used in applications with temperatures ranging from minus to 538 degrees Celsius.

It demonstrates good resistance to neutral and reducing environments. This alloy creates a tenacious oxide, protective film that does not spall off, but it retains superior oxidation resistance at soaring temperatures.

The pipes of seamless configurations have higher load-bearing capacity and strength over other grades.

Titanium’s density is about 60% that of stainless steel and nickel alloys, this weight saving makes it a popular choice in applications where this is critical such as aerospace.

Inconel 625 Coil is characterized by its excellent resistance to oxidation, high-temperature corrosion and fatigue. ASTM B443 UNS N06625 Inconel Plate is widely used in the aerospace, chemical processing and oil and gas industries due to its superior strength, toughness and durability even in extreme environments.

It is able to withstand a wide range of oxidizing and non-oxidizing chemicals, and exhibits outstanding resistance to pitting and crevice attack in the presence of chlorides and other halides.

Common Trade Names: Nickel Alloy 36, Invar 36®, Nilo 6®, Pernifer 6®
Invar 36® is a nickel-iron, low expansion alloy that contains 36% nickel, Invar 36 has a low coefficient of expansion from cryogenic temperatures to about +500°F (260°C).
Invar 36 Tube OD:0.2-6mm, WT: 0.02-2mm

Nickel based 800 Incoloy Hexagonal Pipe is known to have a good resistance to corrosion. Specifically speaking, the Incoloy 800 Pipe offers sufficient resistance against both carburization as well as oxidation corrosion.

Hastelloy C2000 Tubes are used in a broad range of industries including petrochemical processing, chemical processing equipment manufacturing, oil refineries and power plants.

ASTM A240 Type 2205 Plate is a duplex stainless steel plate that is used extensively in various industries such as chemical processing, oil and gas exploration, and marine engineering. SA 240 GR 2205 Sheet is made from grade 2205 stainless steel, which is a combination of ferritic and austenitic steel.

Inconel 600 round bar is a nickel-based alloy with benign carburization and excellent corrosion resistance at high temperatures. Inconel 600 round bars are effective against drying Cl2 and many other different gases at mild and high temperatures. Alloy 600 bar is a nickel-chromium alloy with good oxidation resistance and resistance to chloride pressure decomposition cracking, high cleanliness water corrosion and acid oxidation at elevated temperatures.

It is widely used in offshore oil and gas exploration/production and in heat exchangers in petrochemical/chemical processing.

This provides greatly enhanced resistance to sulfuric acid. It also has a high chromium content, to maximize its resistance to oxidizing chemicals and process streams contaminated with ferric ions and dissolved oxygen.

Alloy 800 is a nickel-iron-chromium alloy with high strength and excellent resistance to oxidation and corrosion at high temperatures. ASTM B407 UNS N08800 Incoloy 800 W. Nr. 1.4876 Welded Pipe is widely used for construction of equipment requiring corrosion resistance, heat resistance, strength, and stability for service up to 1500°F (816°C).

Nickel Alloy 400 and Monel 400, also known as UNS N04400, is a ductile nickel-copper-based alloy consisting primarily of two-thirds nickel and one-third copper. Nickel Alloy 400 is known for its resistance to a variety of corrosive conditions, including alkalis (or acids), salt water, hydrofluoric acid, and sulfuric acid. Since Monel 400 or Alloy 400 is a cold worked metal, this alloy has high hardness, stiffness and strength. By cold working ASTM B164 UNS N04400 bar stock, the alloy is subjected to higher levels of mechanical stress, which in turn causes changes in the alloy’s microstructure.

SCH40 Monel 400 Pipe is designated as Werkstoff Number 2.4360 and UNS N04400. Alloy 400 Pipe also known as Monel Alloy 400 Pipe, Monel 400 Pipe & Nickel Alloy 400 Pipe.

Inconel 600 seamless tubes of standard UNS N06600 and ASTM B167 are the ones manufactured to sustain excessively high pressure and come with great warranty.

Alloy 800 Weld Neck Flanges We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

A789 UNS S31803 and UNS S32205 are two grades of duplex stainless steel that are widely used in various industrial applications. These Duplex S31803 Seamless Pipes are known for their excellent corrosion resistance, high strength, and good weldability. A789 is a specification that covers seamless and welded tubes made from duplex stainless steel.

ASTM A312 TP316 is a standard specification for seamless, straight-seam welded, and heavily cold worked welded austenitic stainless steel pipes used in high-temperature and general corrosive service applications. The 316 Seamless Industrial Steel Pipe is made from a combination of chromium, nickel, and molybdenum, which gives SS 316 Seamless Tube excellent resistance to corrosion and rust.

These ASTM A182 Alloy Steel pipe fittings are manufactured from high quality raw materials, so the manufactured products are of high quality. Additionally, these ASTM A182 Alloy Steel pipe fittings are manufactured with the necessary standards, codes and guidelines in mind, resulting in a high quality product.

Chrome molybdenum flanges provide higher levels of chromium and molybdenum. The added chromium helps improve the hardenability and corrosion resistance of the steel, while the added molybdenum helps to enhance its toughness and corrosion resistance.

High-performance nickel alloys for sour oil and gas fields. Incoloy 800HT Tubing hardened nickel-based alloys and cold-worked solid nickel-based alloys offer many advantages such as high strength, toughness, low magnetic permeability and excellent corrosion resistance. Incoloy 800HT Tubing has proven to be a valuable and versatile material that is able to solve a wide variety of design and application problems. Incoloy 800HT Tubing has the ability to resist low temperature aggressive corrosion environments, as well as hostile high temperature environments. The excellent weldability of the alloy, and its ability to be joined very successfully to other alloys with different compositions.

Monel K-500 (N05500) Bolts are manufactured by the cold heading and hot forming technologies in nominal diameters ranging from 1/8¡±- 3¡± (M3 ¨C M80). It can be in both USCS/Imperial and metric sizes.

Precipitation hardening martensitic stainless steels have comparable corrosion resistance to austenitic grades, but can be precipitation hardened to higher strengths than other martensitic grades. The most common 17-4PH uses about 17% chromium and 4% nickel. The Lockheed-Martin Joint Strike Fighter was the first aircraft to use precipitation-hardenable stainless steel Carpenter Custom 465 in its fuselage.

The large amount of chromium content in 309 Steel U Bolts and 309 Steel T Bolts produces their resistance to corrosion and their non-magnetic characteristic which finds applications in a variety of industries.

Stainless steel flange connection is easy to use and can withstand large pressure. Flange connection is widely used in industrial pipelines. In the family, the pipe diameter is small, and it is low pressure, and flange connection is invisible. If you are in a boiler room or production site, there are flanged pipes and equipment everywhere.

Carbon Steel Pipe Fittings are made up of carbon steel which has a limited range of ingredients in its composition. Carbon steels have high hardness and wear and tear properties.

The high chromium, molybdenum, and nickel levels provide excellent resistance to pitting, crevice, and general corrosion.

SS 347H Blind Flanges
Featuring 347H stainless steel for very good corrosion resistance, this GRAINGER APPROVED weld neck flange can be attached to a system via a circumferential weld at the neck. The welded area can be easily examined by radiography. Matched pipe and flange bore reduces turbulence and erosion inside the pipeline. Flange is excellent for use in your critical applications and is ideal for use with air, water, oil, natural gas, and steam.

Alloy Steel F12 slip on Flanges are made up of chromium molybdenum steel alloy and therefore have a high rupture resistance. They are also preferred due to their light weight because of the low carbon and high alloy nature.Alloy Steel ASTM A182 flanges are very simple to install and have a low center because the pipe occasionally trips into the flanges after welding.

HT PIPE is the undisputed industry leader, offering the most comprehensive line and inventory of carbon steel fasteners, including bolts, nuts, washers, socket head cap screws, and metal threaded screws of all sizes, including all grades. A broad product portfolio covering all aspects and requirements of the industry, providing quality products that you can use with confidence

A flange is a ring of steel (forged, cut from plate, or rolled) designed to connect sections of pipe, or to join pipe to a pressure vessel, valve, pump or other integral flanged assembly. Flanges are joined to each other by bolts, and to the piping system by welding or threading (or loose when stub ends are used). Stainless steel flange simplified as SS flange, it refers to the flanges that made of stainless steel. Common material standards and Grades are ASTM A182 Grade F304/L and F316/L, with pressure ratings from Class 150, 300, 600 etc and to 2500. It used in more industries than carbon steel as stainless steel has better resistant performances on corrosion environment and always provides with a good appearance.

Alloy 304 Studs (Din 1.4301 Studs) Stainless Steel UNS S30400 Studs are commonly used in the brewing industry such as pipes, fermenters, yeast trays, railway vehicles and warehouses. Due to the high work hardening rate of these alloy 304 studs, intermediate annealing may be required to successfully manufacture the part. These annealed grade 304 studs have better heat and corrosion resistance than Type 301 and 302 stainless steels, they are not very conductive or thermally conductive, and are non-magnetic.

Hastelloy C-276 also has excellent resistance to pitting corrosion, stress corrosion cracking and oxidizing atmospheres, as well as excellent resistance to many different chemical environments.

Stainless steel sanitary tube is polished on the outside and inside to the highest quality standards. Our 20 lengths of polished OD/ID tube meets ASTM A270 and 3A sanitary standards. Sanitary tube, sanitary fittings, sanitary valves and other products are manufactured for the food and beverage, pharmaceutical and biotechnology industries. Our products are engineered to decrease entrapment areas where bacteria can form and dock. Clamp-style sanitary fittings, are designed to be broken down, cleaned and reassembled for the optimal sanitary product line.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

Carbon steel LF3 round bars have the best corrosion resistance to general corrosion. Carbon steel LF3 bars are mainly used for building skyscraper bridges and shipbuilding. Carbon steel LF3 threaded rods are commonly used in pharmaceutical equipment. Carbon steel LF3 round bars are also widely used in heat exchangers and valves.

Inconel 600 Hex Bolts are a family of nickel-chromium-molybdenum alloys for high strength and good corrosion resistance at elevated temperatures. The high nickel content makes Inconel 600 Heavy Duty Hex Bolts resistant to corrosion by many organic and inorganic compounds and virtually immune to chloride stress corrosion cracking.

SA 182 Gr F1 Slip on Flanges also known as SO flanges. This is a flange that slides over the pipe and has an internal design that is slightly larger than the pipe.

The 6Mo super austenitic steel combines moderate tensile strength and high ductility with excellent corrosion resistance in seawater and variety of industrial environment.

Nickel Alloy DIN 2.4066 Slip on Flanges The Nickel alloy 200 has some excellent properties, which have made it quite famous in various industries. The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment. We are a specialized Nickel 200 Flange Manufacturer In China who produces the flanges of the given grade in different shapes and sizes, according to the dimensional requirements of the client. Our experienced team of professionals supervises the process of manufacturing Nickel 200 Slip On Flanges to ensure they have the correct dimensional accuracy and quality. They also conduct certification tests to ensure the product’s condition before delivering it to the customers.

Grade SMO 254 Long Weld Neck Flanges are thermally stable and possess moderate strength even when the temperature is high. SMO 254 Threaded Flanges whose design enables combining improved resistance to pitting, high strength, stress corrosion, crevice corrosion, and cracking.

316 Stainless Steel’s resistance to corrosion and contamination, low maintenance, and a familiar luster make stainless steel an ideal material for many applications that require the strength and corrosion resistance of steel. In addition, stainless steel can be rolled into sheet, plate, bar, wire and tube. These can be used in cookware, tableware, surgical instruments, major appliances, vehicles, construction materials in large buildings, industrial equipment (eg, paper mills, chemical plants, water treatment), and storage tanks and tankers for chemicals and food.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.49

316 / 316L Stainless Hex Socket Head Bolts are used in applications requiring high strength, toughness and machinability along with improved corrosion resistance. The alloy contains a higher percentage of molybdenum and nickel than grade 304 stainless steel, improving corrosion resistance, making it ideal for applications in corrosive environments. 316L stainless steel has a higher carbon content than 316 stainless steel, reducing its weldability.

The A350 LF2 Class 1 Flange is the most used with class 2 being used in specific applications. The flanges can also be heat treated for hardening. The heat treatment used by manufacturers on the Carbon Steel A350 Lf2 Flanges includes normalizing, tempering, quenching as well as precipitation heat treatment. A350 LF2 Class 1 and class 2 flanges has chemical and many other mechanical properties such as grade class, tensile strength, yield strength, elongation, hardness etc. This is used for higher temperature and thy ear also used for many other industries.

The weld neck flange comprises of a round fitting that extends beyond the rim of the circumference. These flanges, typically manufactured from forging, are actually welded to pipes.

For industrial purposes, in pipeline systems usually we need to change the transmission direction; Adjust fluids (oil and gas, water, slurry) flow rate; Open or close the pipelines, etc. So to complete these activities, steel pipe fittings will be applied.

Monelk500, also known as UNS N05500, has the same corrosion resistance as monel400, but has higher mechanical strength and hardness. It has good corrosion resistance and long-term organizational stability.

Alloy steel is steel that is alloyed with a variety of elements in total amounts between 1.0% and 50% by weight to improve its mechanical properties. Alloy steels are broken down into two groups: low alloy steels and high alloy steels. The difference between the two is disputed. Smith and Hashemi define the difference at 4.0%, while Degarmo, et al., define it at 8.0%.[1][2] Most commonly, the phrase “alloy steel” refers to low-alloy steels.

The flange connection type usually comes with double units, with a gasket and some bolts & nuts to connect each other. (Firstly pipes are welded on the flanges, then valves and other equipment could be installed on flanges.)

When connecting these parts, put gasket in the middle of two flanges, then tightening the flange screws, so the two will be connected together tightly.