stainless steel 253MA S30815 90 degree seamless elbow

A pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction
or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

In seamless fitting form it has size ¡°1/2 to 24¡± and in welded form¡±24 to 96¡± and thickness is available in SCH 10,20,30,40,80,100,120,140,160,XXS. It has dimensions like ANSI/ ASME B16.9, B16.28, MSS-SP-43.

Our Duplex Steel S31803, S32205 Seamless Pipe Fittings are machinable and weldable and ductile even at low temperatures. Duplex steel UNS S31803 butt welded pipe fittings generally have excellent corrosion resistance compared to other austenitic steels.

We have Largest inventory of Super Duplex Steel S32750 Pipe Fittings. Super Duplex Stainless Steel S32750 Pipe Fittings, S32750 Super Duplex Steel Buttweld Pipe Fittings Suppliers, ASTM A815 S32750 Butt weld Fittings Exporter, S32750 Butt weld Elbow, S32750 Super Duplex Steel Pipe Fittings Dealer, Super Duplex Steel S32750 Seamless Pipe Fittings Suppliers in Mumbai, India, SAF 2507 Pipe Fittings, Super Duplex Steel Welded Pipe Fittings, Super Duplex Steel Buttweld Fittings, Super Duplex Steel UNS S32750 Pipe Fittings Stockholder, Super Duplex Steel 2507 90 deg. Elbow, Super Duplex Steel S32750 45 deg.

ASTM A234 WP22 Pipe Fittings are made up of the specification that has carbon, manganese, silicon, sulfur, phosphorous, chromium and molybdenum in its composition. The molybdenum content is 0.9-1.1% of the composition which makes this grade specific. This grade has a tensile strength of 380MPa minimum and a yield strength of 585MPa minimum.

This means titanium can be used as a replacement for steel¡ªa major benefit, as it is 45% lighter than steel. It is twice as strong as aluminum and 60% denser.

Inconel 600 butt welded pipe fittings have excellent mechanical and physical properties. They have high strength and enhanced solderability over a wide temperature range. They show good resistance in different types of corrosive media and the fittings are non-magnetic in nature.

Stainless steel tees, carbon steel tees and special grade tees are widely supplied by us to many industries such as power generation, petrochemical, shipbuilding, paper manufacturing, chemical, pharmaceutical, and fabrication.

Stainless Steel 304 Fitting Elbow is an austenitic chromium alloy with a steel composition of 18% chromium and 8% nickel. Stainless steel 304 pipe fittings have high ductility, excellent forming, spinning and drawing properties.

We manufacture premium duplex 31803/32205 fittings with many key properties such as high resistance to corrosion fatigue, stress corrosion cracking, especially chloride stress corrosion cracking, erosion, excellent workability and weldability.

Carbon steel pipes are known for their ability to withstand high temperatures and are ideal for steam pipes. However, if you are trying to work in extreme climatic conditions (for example, transporting cryogenic liquids), you must use a different grade of pipe.

Common in the plumbing industry, threaded fittings are gateway connections used to increase and fix pipe lengths.

Forged fittings produced in a facility covered by the ASME B16.9 standard must be manufactured in accordance with ASTM A 403. Molybdenum bearing stainless steel 316L fittings are also known as marine grade due to their excellent resistance in marine environments. While the chemical composition of grade 316L is similar to that of grade 316 stainless steel, the main difference between the two alloys is the nitrogen and carbon content.

Alloy 20 (Alloy 20) is an iron-based austenitic alloy developed to resist sulfuric acid corrosion. It has excellent resistance to sulfuric acid corrosion; it has strong resistance to phosphoric acid, nitric acid and chloride environments, chloride stress corrosion, pitting corrosion and crack corrosion. Therefore, alloy 20 has the name of anti-corrosion alloy; it has a wide range of applications: such as: chemical, food, medicine, power production and plastics industries will use it. For resistance to pitting corrosion and chloride corrosion, stress corrosion cracking problems, etc., alloy 20 is often used.

MONEL K500 is a nickel-copper alloy, precipitation hardenable through additions of aluminum and titanium.

Bending a pipe or tube using a stationary die while a counter die bends the material around the stationary die.

904L (N08904, 14539) super austenitic stainless steel contains 14.0-18.0% chromium, 24.0-26.0% nickel, 4.5% molybdenum. 904L super austenitic stainless steel is a low-carbon, high-nickel, molybdenum austenitic stainless acid-resistant steel, which is a proprietary material imported from French H¡¤S Company. It has good activation-passivation transformation ability, excellent corrosion resistance, good corrosion resistance in non-oxidizing acids such as sulfuric acid, acetic acid, formic acid, phosphoric acid, and good corrosion resistance in neutral chloride-containing media Excellent pitting corrosion resistance, as well as good crevice corrosion resistance and stress corrosion resistance. It is suitable for various concentrations of sulfuric acid below 70 ¡ãC, and has good corrosion resistance in acetic acid of any concentration and temperature under normal pressure, as well as in the mixed acid of formic acid and acetic acid.

Alloy 20 Industrial Fitting, Werkstoff No 2.4660 Alloy Butt Weld Tee, ANSI B16.28 Alloy 20 Cross, MSS SP-43/SP-79 Alloy 20 Stub End
ASME SB366M Alloy 20 Pipe Cap, ASME/ANSI B16.9 Alloy 20 Reducer, Alloy 20 ASTM B366 Welded Fitting, China B366 Alloy 20 Seamless Fitting Price

The high nickel content gives the alloy resistance to corrosion by many organic and inorganic compounds and also makes it virtually immune to chloride-ion stress-corrosion cracking.

Generally, the corrosion resistance of Monel K500 in solid solution is basically the same as that of Monel 400 alloy, so the corrosion resistance data of Monel 400 can be applied to Monel K500 alloy. Due to its low corrosion rate and high strength in flowing seawater, the alloy is particularly suitable for manufacturing seawater corrosion-resistant centrifugal pump shafts.

Inconel 625 elbow has also found its way into the aircraft industry, particularly for exhaust equipment, fuel lines, heat exchanger casings, and rocket components.

Duplex stainless steel fittings include the selection and preparation of pipes or tubes, joining them together in various ways, and locating and repairing leaks. It combines several beneficial properties of ferritic and austenitic stainless steels.

High creep strength is attained through control over crystal grains¡ªvia high temperature heat treatment, together with fine control over carbon, titanium, and aluminum content.

Sanitary elbows are also classified by length. A large radius elbow has a curvature radius of 1.5 times the pipe¡¯s diameter, but a short radius elbow has a radius equal to the pipe¡¯s diameter

These fittings contain small amounts of additional copper, titanium and molybdenum, which improve their chemical and mechanical properties. Our UNS N08825 Incoloy 825 elbows have been designed to provide increased resistance to crevice and pitting corrosion and to operate smoothly at moderately elevated temperatures.

Duplex UNS S31803 butt welded pipe fittings are duplex ferritic austenitic 22% chromium, 3% molybdenum, 5% to 6% nickel alloy stainless steel. Duplex UNS S31803 butt welded pipe fittings are formed according to the crystal structure of stainless steel.

It is applicable in various applications like car headers, machinery parts, screws and also food handling equipment. Hot / Cold / Fabricate / Seamless / Welded / Induction

Inconel 601 (N06601) nickel-based alloy plasticity:
Inconel 601 (UNS N06601) nickel base alloy is relatively easy to hot work. The heating temperature is 1150~1200C, and the thermal processing temperature is
1050~1200C, simple processing can be carried out below 850¡ãC.

Incoloy 800H is a solution heat treated, carbon controlled version of its parent Alloy 800.

T In the normal case, the stainless steel stub end is welded to the pipe, allowing the free lap pipe flange to pivot around the stub end; it eliminates the bump gap arrangement problem.