stainless steel 316 welded pipe fittings elbow

Since the Stainless steel 90 degree elbow is sold as per pipe fitting it is important to know the pipe schedule this helps in matching the ID of the fitting to that of the pipe. 150# stainless steel socket weld fittings are available in both seamless and welded conditions.

The tensile strength of this superalloy is 690 MPa, while its yield strength measures 275 MPa.

A standard AMS 5666 or UNS N06625 variant of Inconel 625 may contain 58% nickel, 22% chromium, and 3.5% niobium.

Carbon steel pipes are known for their ability to withstand high temperatures and are ideal for steam pipes. However, if you are trying to work in extreme climatic conditions (for example, transporting cryogenic liquids), you must use a different grade of pipe.

Steel Pipe Pipe Bends can work under constant pressure due to excellent dexterity and high load-bearing capacity.

ASME SA 240 UNS S32205 elbows are standard elbows that can be connected to almost any size elbow. These elbows are available in NPS ? to NPS 48 and can change the direction of flow in the pipe. UNS S32205 elbows are stronger than austenitic stainless steels.

Duplex Steel S31803 Reducer Fittings are resistant to chloride environments and sulfide stress corrosion. Our WNR 1.4462 Duplex Steel S31803 Pipe Couplings withstand sulphur-induced stress corrosion cracking, accommodate high steam pressures and provide extended service life, economical and reliable.

Our stainless steel UNS S31600 reducer price list is very competitive with market prices. Reducers are used to reduce the diameter of pipes. There are eccentric reducers and concentric reducers.

We can manufacture and supply high quality carbon steel pipe elbows with bending radius ranging from R=3D-10D and bending angle from 10 degrees to 180 degrees. In addition, we can also manufacture carbon steel elbows according to the customized requirements of our esteemed customers. All our carbon steel fittings and flanges are supplied with relevant raw material and finished product test certificates. Carbon steel pipe elbows with bend radii of 3D, 5D and 7D are most commonly used in various industries. Our main elbow products include – high quality carbon steel long radius pigging elbows, seamless long radius pigging elbows and welded long radius pigging elbows.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

316 stainless steel pipe is the second most common stainless steel after 304. SS DIN 1.4401 / 1.4436 Rectangular Welded Pipe, ASTM A312 TP316 Pipe, 316 Rectangular Pipe, 316 Pipe typically contain 16% Chromium and 10% Nickel with added Molybdenum typically between 2-3%.

Copper-nickel or copper-nickel elbows are moderately strong and commonly found in marine saltwater applications.

Alloy X pipe bend is one of the most widely used nickel base superalloys for gas turbine engine components.

Incoloy 800HT, also known as ¡°Alloy 800HT¡±, is designated as UNS N08811 or DIN W.Nr. 1.4959. It is an iron-nickel-chromium alloy having the same basic composition as Incoloy 800 and Incoloy 800H but with significantly higher creep-rupture strength.

Monel 400 Tee is a nickel-copper alloy resistant to seawater and steam at high temperatures, as well as salts and corrosive solutions. Monel 400 Pipe Elbows operate over a wide temperature range and are available in a variety of styles for a variety of products.

Carbon Steel Pipe Fittings are made up of carbon steel which has a limited range of ingredients in its composition. Carbon steels have high hardness and wear and tear properties.

321 stainless steel, also known as UNS S32100 and Grade 321, is primarily comprised of 17% to 19% chromium, 12% nickel, .25% to 1% silicon, 2% maximum manganese, traces of phosphorus and sulfur, 5 x (c + n) .70% titanium, with the balance being iron. With regards to corrosion resistance, 321 Stainless Steel is equivalent to Grade 304 in the annealed condition and is superior if the application involves service in the 797¡ã to 1652¡ã F range. 321 Stainless Steel combines high strength, resistance to scaling and phase stability with resistance to subsequent aqueous corrosion.
UNS S32100 Reducing Tee is preferred due to its ability to work in high pressure and temperature even at a higher temperature.
Stainless Steel 321 / 321H Pipe Fittings are used in filtration, refrigeration, oil, gas, petrochemical and in offshore oil drilling industries. The material has chromium, nickel, titanium and other elements along with carbon. The 321H has higher carbon than the other versions. There are different types of fittings such as the 321/321H Stainless Steel Buttweld Fittings which are most commonly used but there are also the seamless fittings. The Stainless Steel UNS S32100 Pipe Elbow is a fitting type that is used in high temperature applications to change direction of flow.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

We also accept all orders of CS Elbow A234 WPB up to and including 90 degree to suit your requirements.

ASTM a403 wp304 pipe bend is done to under control conditions to avoid carburization, decarburization and scaling surface. Heat treatment methods are stress relieving, hardening and annealing which strength the ductility and corrosion resistance properties.

Inconel 718 elbows are commonly used in gas turbine engine parts, wellhead completions and blowout preventers (BOPs).

Stainless Steel 316H Stub End Pipe Fittings are equivalent to those of the parent metal, matching or slightly over-alloyed fillers should preferably be used.

This 316L Stainless Steel 90 Degree Weld Elbow is a common connection pipe fitting used in plumbing installation. It is used for connecting the bend of pipe and changing the direction of pipe. Since the 90 degree weld elbow has good strength and resistance to corrosion, it has long service life and low maintenance cost.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Stainless steel is an alloy of iron that is resistant to rusting and corrosion. It contains at least 11% chromium and may contain elements such as carbon, other nonmetals and metals to obtain other desired properties. Stainless steel’s resistance to corrosion results from the chromium, which forms a passive film that can protect the material and self-heal in the presence of oxygen
Completely and infinitely recyclable, stainless steel is the ¡°green material¡± par excellence. In fact, within the construction sector, its actual recovery rate is close to 100%.
Stainless steel is also environmentally neutral and inert, and its longevity ensures it meets the needs of sustainable construction. Furthermore, it does not leach compounds that could modify its composition when in contact with elements like water.
Stainless steel must contain at least 10.5 percent chromium. Depending on the grade, it may contain much higher chromium levels, and additional alloying ingredients like molybdenum, nickel, titanium, aluminum, copper, nitrogen, phosphorous or selenium.
In addition to these environmental benefits, stainless steel is also aesthetically appealing, extremely hygienic, easy to maintain, highly durable and offers a wide variety of aspects. As a result, stainless steel can be found in many everyday objects. It also plays a prominent role in an array of industries, including energy, transportation, building, research, medicine, food and logistics.

One of the major concerns about the SS 304 Fitting is its low cost compared to other high end alloy material counterparts.All A403 gr WP304 Buttweld Elbow and 304 Pipe Fittings should experience heat-treatment.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Alloy 32750 is a super duplex stainless steel supplied in hot worked and solution annealed conditions. As a super duplex stainless steel, it combines the desirable aspects of austenitic and ferritic steels. Higher chromium, molybdenum and nitrogen content results in a Pitting Resistance Equivalent Number (PREN) > 40, providing superior pitting and crevice corrosion capabilities to austenitic and duplex stainless steels in virtually all corrosive media, and critical pitting temperature over 50¡ãC.

Duplex stainless steels are a family of stainless steels. These are called duplex (or austenitic-ferritic) grades because their metallurgical structure consists of two phases, austenite (face-centered cubic lattice) and ferrite (body centered cubic lattice) in roughly equal proportions. They are designed to provide better corrosion resistance, particularly chloride stress corrosion and chloride pitting corrosion, and higher strength than standard austenitic stainless steels such as Type 304 or 316.