stainless steel 420 round bar 150mm

Features of ferritic stainless steel bars are: chromium base, typically less than 0.1% carbon, increased resistance to harsh environmental conditions, increased resistance to stress corrosion cracking (SCC), greater susceptibility to intergranular corrosion, and increased susceptibility to intergranular corrosion at very low Brittle at temperature, most often used for fairly thin sheets or pipes, since welds are not particularly tough.

The absolute roughness of hot rolled stainless steel round bars is higher than that of drawn bars. This is not a problem when rebar is only used for strength and corrosion resistance properties. But when the bar is used for aesthetic applications and outdoor fixtures, cold drawn stainless steel round bar is preferred because of its smooth surface and less absolute roughness. Bars can also vary in size. Typical range is 5mm to 450mm radius.

Steel bars are one of the core components of any manufacturing
industry or for that matter any industry that relies on machineries.
Thanks to its versatile applications, steel bars find itself in the
epicenter of most of engineering industries, be it automotive, textile,
fabrication, construction, cement, ship building, paper and pulp,
defence, heavy earth moving equipments or aerospace.
The overwhelming popularity of steel bars is owed to the fact that
it is possible to be produced in varying types, shapes, sizes, and
grades of bars to cater the exact technical requirements. Steel
bars generally have the shapes such as flat, round, hexagonal,
square and channel and on most of the occasions, it is the shape
of the bar that defines its application area

The A479 specification contains tensile strength, yield strength, elongation, and hardness values for many different heat treatments. Special instructions for heat treatment and additional corrosion testing of austenitic stainless steels are also included in the specification. The grades of A479 steel are also defined by their chemical composition.

Type 347 stainless steel has slightly improved corrosion resistance in strongly oxidizing environments than Type 321 stainless steel. Type 347 is stabilized with columbium and is more suitable for aqueous and low temperature environments due to its good resistance to intergranular corrosion. Both 347 and 321 have good resistance to polythionate stress corrosion cracking encountered in refineries. The high temperature oxidation resistance of 347 is similar to that of 304 stainless steel. For 1500¡ãF.
Standard SUS, AISI, DIN
Diameter 5~500mm
Length ¨Q12M or As Per Clients’ Requirements

We have Largest inventory of AL6XN Round Bar. AL6XN Bars, AL6XN Bar Suppliers, ASTM B691 AL6XN Bars Exporter, AL6XN Threaded Bars, AL6XN Round Bars Dealer, and Stainless Steel AL-6XN Round Bar.

Austenitic stainless steels shall be heat treated and subjected to corrosion tests. The round bar rolling process takes place as the stainless steel is placed into the analysed continuous shape mill, which is released in the first eight mill stands. Controlling the raw material (dimensions, surface, number of melts) before rolling, then heating in walking beam furnaces according to the technology of heating steel grades. When heated to the proper temperature, it is subjected to the descaling action created by the heating process. The next stage is the technical operation of single-stand rolling. After the hot rolling process, the product obtained is cooled to ambient temperature. melting times), and then heated in a walking beam furnace according to the steel grade heating process. When heated to the proper temperature, it is subjected to the descaling action created by the heating process.

Our 347 stainless steel bars are extremely resistant to prolonged heat and corrosion, making them ideal for power generation, engines, welded fabrication and other high temperature applications. Also known as UNS S34700 bars, these 347 stainless steel bars have superior creep and stress rupture properties compared to other grades such as 304 stainless steel, with excellent mechanical properties.

Applications for 410 stainless steel rods are valve and pump parts, fasteners, cutlery, turbine parts and bushings.

Steel bars are one of the core components of any manufacturing
industry or for that matter any industry that relies on machineries.
Thanks to its versatile applications, steel bars find itself in the
epicenter of most of engineering industries, be it automotive, textile,
fabrication, construction, cement, ship building, paper and pulp,
defence, heavy earth moving equipments or aerospace.
The overwhelming popularity of steel bars is owed to the fact that
it is possible to be produced in varying types, shapes, sizes, and
grades of bars to cater the exact technical requirements. Steel
bars generally have the shapes such as flat, round, hexagonal,
square and channel and on most of the occasions, it is the shape
of the bar that defines its application area

Our stainless steel round bar stock ranges from 1/8¡± to 24¡± diameter. We are the industry leader in long bar stock ranging from 20′-24′ R/L. This means we are able to supply stainless steel for projects requiring lengths longer than the industry standard 12′. The long length also provides flexibility in part length, often leaving excess scrap on the standard 12′ length.

Our range of high quality ASTM A479 stainless steel round bars are designed for the chemical industry, steel mills, petrochemicals, paper industry, shipping/shipping and more. ASTM A479 Stainless Steel Round Bar is a quality standard designed and developed to international standards. We are a certified company. We manufacture all ASTM A479 stainless steel round bars with the latest technology from our manufacturing unit.

Stainless steel 304 round bars are made of stainless steel with a composition of 18% chromium and 8% nickel. The material has corrosion resistance and strength properties. HT PIPE is one of the leading manufacturers and suppliers of stainless steel 304 round bar products. The material is strong, with a minimum tensile strength of 515MPa and a minimum yield strength of 205MPa. It can also operate at high temperatures.

The combined strength of stainless steel bar tends to be inversely related to its corrosion resistance, so a good balance is important, be aware that the strongest stainless steel alloys available may not be suitable for 95% of applications and structural use in environments.

AISI 304L 1.4306 S30403 SUS304L, also known as SS 304L, is a type of stainless steel rod that is often used in a variety of applications. This material is highly resistant to corrosion, making AISI 304L Stainless Steel Rod ideal for use in environments that are prone to chemicals and moisture.

The advantageous properties of stainless steel can be seen compared to standard plain carbon low carbon steels, like 304, 304l, 316, 316l and 347. Although stainless steel has a wide range of properties, in general, compared to mild steel, stainless steel has: higher corrosion resistance, higher low temperature toughness, higher work hardening rate, higher hot strength, more High ductility, higher strength and hardness, more attractive appearance and low maintenance.

Stainless steel WNR 1.4301 wire is known for its amazing tensile strength and fabric power and is available in a variety of sizes according to customer requirements. They are the product of the best materials and primary strategies that conform to the established norms of the industry. In our assortment we have round rods with special type of ends to ensure short and tight fittings in pipes. Furthermore, in addition to custom-designed specifications, we also offer a wide variety of round bars to meet customers’ software needs in the most green way possible.

254 SMO Bar is a high alloyed austenitic stainless steel grade. This stainless steel grade has been developed for use in seawater and other media containing corrosive chlorides.

While 316 is not completely rust-proof, the alloy is more corrosion-resistant than other common stainless steels. Surgical steel is made from subtypes of 316 stainless steel.

Stainless steel black bars are manufactured through a forging process. Here, the steel passes through several rolls and raw materials such as billets and blooms are heated to around 1200 degrees Celsius. It exceeds the recrystallization temperature of steel.

Stainless steel round bars are available in three grades. 304 is the most common grade with easy weldability, good formability and corrosion resistance. Grade 316 offers excellent corrosion resistance, making it ideal for harsh environments such as salt water or heavy industrial areas. Like grade 304, it is also easy to weld, but more difficult to machine. Finally, grade 303 is easier to machine, drill and cut than other grades. However, it is not as suitable for welding as grades 304 and 316.

Grade 304 – This is a standard “18/8” stainless steel with excellent forming and welding characteristics. 304L is a low carbon version of 304 and does not require post weld annealing. This makes it ideal for heavy components.

Magnetic Response of Stainless Steel
Magnetic response is the attractive force of steel to a magnet. Austenitic grades are generally not magnetic, although a magnetic response can be induced in low austenitic grades by cold working. High nickel grades such as 316 and 310 will remain non-magnetic even when cold worked. All other grades are magnetic.

SS 316/316L/316Ti round bars/rods are made from chemical compositions such as carbon, nickel, copper, chromium, titanium, iron and manganese. These rods and rods are designed with physical and mechanical properties such as density, yield strength, tensile strength, elongation, thermal conductivity, electrical conductivity, modulus of expansion, and electrical expansion.

Super Duplex UNS S32760 Bar High resistance to pitting and chloride ions. The bars are heat treated at 1100 degrees Celsius and then water quenched. They have different standards like ASTM A479 UNS S32760 Hex Bar with different tolerance classes like H8 – H12, K10 to K12. These bars are used in the marine, food and surgical industries.

Stainless steel forged bars are harder and more durable. They are versatile and therefore available for a wide range of services.

Stainless steel UNS S30400 round bars are used to grow a variety of utensils, chemical equipment, cookware and loads of various digital and electrical machinery and parts. They are also used in the cement industry, shipbuilding industry, petrochemical industry, chemical industry, sugar mills, etc.
We use the best metal alloys available to manufacture the round bars and their finish is clean and precise.

316 stainless steel round bar has a very wide range of industrial applications due to its unique performance characteristics, including excellent corrosion resistance and easy formability. Grade 316 stainless steel is differentiated by its molybdenum content, which supports its excellent resistance to oxidation. Grade 316L is a reduced carbon version of the standard Grade 316 and is recommended for applications requiring allergy resistance.

A479 is a specification for bars and rods produced in several grades of austenitic, ferritic, duplex or simply austenitic-ferritic and martensitic stainless steels. Since this designated stainless steel A479 round bar can be produced in any of the above grades, it can be heat treated differently.

We are a manufacturer, supplier and exporter of Stainless Steel 304 / 304L Bars and Bars, which have been thoroughly inspected by a team of experts to ensure that these products are safe to use and perform without any defect. Stainless steel 304 bar (UNS S30400) has excellent corrosion/oxidation resistance due to chromium content.