stainless steel pipe fittings 304-316 elbow

Duplex 2205 fittings have higher yield strength and good mechanical properties. These fittings are highly resistant to corrosion and stress. The presence of ferritic alloys gives them strength to prevent cracking in sulfide and chloride environments.

This nickel alloy provides excellent resistance to hydrochloric acid at all concentrations and temperatures. In additions, Hastelloy B2 pipe bend has excellent resistance to pitting, stress corrosion cracking and to knife-line and heat-affected zone attack.

Stainless steels 316 and 316L are the second most common stainless grades after 304/304L, and are higher versions of 304 with the addition of molybdenum and a slightly higher nickel content. Stainless Steel 316 has similar properties to Type 304, except Alloy 316 is stronger at high temperatures.

Designed to combine impact toughness against chloride stress corrosion cracking with pitting and crevice corrosion, S31254 stainless steel is twice as strong as stainless steel 300 series.
It is also known for its excellent machinability.

304 has good oxidation resistance in intermittent duty up to 870¡ãC and continuous duty up to 925¡ãC. However, continuous use at 425-860¡ãC is not recommended. In this case, 304L is recommended because of its resistance to carbide precipitation.

Butt weld tee dimensions shall be specified in pipe NPS (DN) and thickness in schedule, where socket weld tee or threaded tee thickness specified in pressure class ratings.

While the reduction in nickel content gives the metal lower mechanical properties, the higher molybdenum and chromium content almost makes up for the lack of nickel in duplex stainless steel fittings.

ASME B366 Incoloy 800 Elbow resists water corrosion at moderate temperatures.

Our ASME SA403M SS 304 caps are highly demanded by the printing and textile industries for their versatility and excellent solderability.

Titanium’s thermodynamic properties do not allow it to melt in normal conditions, because it becomes more reactive at elevated temperatures and can catch fire if the oxygen molecules are present in its environment.

Stainless steel reducer fittings are similar to couplings, but they can be detached and attached to the pipe and then screwed back to connect them. 316 stainless steel pipe fittings are used in the water pipeline, natural gas, manufacturing and nuclear power plant industries.

Grade WPB fittings made from the steel pipes or plates maximum C is 0.35%.

We are manufacturing Stainless steel 317L forged fittings in both socket weld and threaded form and Stainless steel 317L pipe bends in both standard and non standard sizes, with bending radius of 1D to 10D. We offer ex-stock delivery of various standard size and type Stainless steel 317L pipe fittings, Stainless steel 317L flanges and Stainless steel 317L pipe bends.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

INCOLOY alloys belong to the category of super austenitic stainless steels. These alloys have nickel-chromium-iron as the base metals, with additives such as molybdenum, copper, nitrogen and silicon. These alloys are known for their excellent strength at elevated temperatures and good corrosion resistance in a variety of corrosive environments.
The Alloy 800 Elbow is widely used in various industries and is primarily famous for its excellent mechanical properties. The Werkstoff Nr. 1.4876 End Cap has low gas content, low vapor pressure, and high thermo-electric conductivity.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

Available in both 304 and 316L stainless steel alloys. This product is manufactured in accordance with 3A Standards for use in sanitary line processing including food, beverage, and pharmaceutical industries.

ASTM A234 is a standard specification for steel pipe fittings, including carbon and alloy steel materials for medium and high temperature service. It covers seamless and welded types of steel fittings. Steel pipe fittings are used in the manufacture of pressure pipes and pressure vessels. These fitting materials include killed steel, forgings, bar, sheet, seamless or HFW (fusion welded) pipe products with added filler metals.

304 stainless steel is the most common stainless steel. The steel contains both chromium (between 18% and 20%) and nickel (between 8% and 10.5%)[1] metals as the main non-iron constituents. It is an austenitic stainless steel.When it comes to uses, SS304 can be found in kitchen sinks and other appliances such as toasters and microwave ovens. SS304 is also used to make pressure vessels, wheel covers as well as for building facades.

SS UNS S31603 Equal Tee is available in welded and seamless versions for a 90¡ã connection to the main pipe. They are also resistant to high temperatures and pressures and have wall thicknesses suitable for pipes in the automotive, industrial, marine and power generation industries. Molybdenum-containing austenitic stainless steel DIN 1.4404 seamless pipe fittings are relatively low in carbon compared to DIN 1.4401 grades, but with small additions of molybdenum and nitrogen, and are used in light or moderately corrosive industries.

Pipe caps are used in plumbing equipment such as domestic, commercial and industrial water supply lines, machinery and process equipment. Pipe caps are also installed on the pump line for the sole purpose of removing air blockages. We provide 1-8- 6 size duplex 2205 pipe fitting cap.

This 316L Stainless Steel 90 Degree Weld Elbow is a common connection pipe fitting used in plumbing installation. It is used for connecting the bend of pipe and changing the direction of pipe. Since the 90 degree weld elbow has good strength and resistance to corrosion, it has long service life and low maintenance cost.

Duplex stainless steels are Fe-Ni-Cr alloys consisting of ferritic-austenitic microstructure at room temperature. These steels generally possess beneficial combinations of the austenitic and ferritic phases. Duplex stainless steels exhibit greater toughness and better weldability than ferritic stainless steel (Nilsson, 1992). They have higher strength and better corrosion resistance than austenitic stainless steel (Atamert and King, 1992). Their good engineering performance has led to an increasing number of applications, mainly in corrosive environments such as sour gas pipelines and chemical reaction vessels.
Duplex stainless steels combine characteristics of the austenitic and ferritic family of alloys to offer benefits from both with fewer downsides — often at a lower cost than other steel alloys.
Duplex stainless steels have a combination of two phases, ferrite and austenite in approximately equal measure. This allows them to benefit from the advantages of both austenitic and ferritic stainless steels, leading to increased strength, improved weldability, higher toughness and resistance to several types of corrosion.

HT PIPE is the government certified and doing business in steel industry for long years and are manufacturing S32750 Duplex buttweld fittings at affordable rates.

We must review the complete catalog content to ensure that system designers and users make safe product choices. When selecting a product, the overall system design must be considered to ensure safe, trouble-free performance. Function, material compatibility, adequate ratings, proper installation, operation and maintenance are the responsibility of the system designer and user.

Alloy 400 has corrosion resistance, high strength and good weldability. Monel 400 has amazing mechanical properties at sub-zero temperatures. It has a melting point of 2370-2460¡ãF and is easily used at temperatures up to 1000¡ãF.

ASTM A234 includes wrought carbon steel and alloy steel fittings of seamless and welded construction covered by the latest revision of ASTM B16.9, B16.11, MSS-SP-79, MSS-SP-83, MSS-SP-95, and MSS-SP-97. etc.

We are a manufacturer, trader, stocker, supplier and exporter of a full range of Duplex Steel S31803, S32205 Pipe Fittings made of 50-50 Austenitic-Ferritic microstructure with excellent impact toughness and higher resistance to general corrosion.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Our reducers have high strength and corrosion resistance and are suitable for various industries.