stainless steel tube 304 316 mirror polished

Nilo Alloy 36, W.Nr 1.3912, Invar 36® is a nickel-iron, low controlled expansion alloy that contains 36% nickel and possesses a rate of thermal expansion approximately one-tenth that of carbon steel.
Invar 36 Specifications: UNS K93600, W.Nr 1.3912

This provides greatly enhanced resistance to sulfuric acid. It also has a high chromium content, to maximize its resistance to oxidizing chemicals and process streams contaminated with ferric ions and dissolved oxygen.

It demonstrates good resistance to neutral and reducing environments. This alloy creates a tenacious oxide, protective film that does not spall off, but it retains superior oxidation resistance at soaring temperatures.

SCH40 Monel 400 Pipe is designated as Werkstoff Number 2.4360 and UNS N04400. Alloy 400 Pipe also known as Monel Alloy 400 Pipe, Monel 400 Pipe & Nickel Alloy 400 Pipe.

Inconel 600 seamless tubes of standard UNS N06600 and ASTM B167 are the ones manufactured to sustain excessively high pressure and come with great warranty.

It is able to withstand a wide range of oxidizing and non-oxidizing chemicals, and exhibits outstanding resistance to pitting and crevice attack in the presence of chlorides and other halides.

Common Trade Names: Nickel Alloy 36, Invar 36®, Nilo 6®, Pernifer 6®
Invar 36® is a nickel-iron, low expansion alloy that contains 36% nickel, Invar 36 has a low coefficient of expansion from cryogenic temperatures to about +500°F (260°C).
Invar 36 Tube OD:0.2-6mm, WT: 0.02-2mm

The pipes of seamless configurations have higher load-bearing capacity and strength over other grades.

It is widely used in offshore oil and gas exploration/production and in heat exchangers in petrochemical/chemical processing.

Inconel 600 round bar is a nickel-based alloy with benign carburization and excellent corrosion resistance at high temperatures. Inconel 600 round bars are effective against drying Cl2 and many other different gases at mild and high temperatures. Alloy 600 bar is a nickel-chromium alloy with good oxidation resistance and resistance to chloride pressure decomposition cracking, high cleanliness water corrosion and acid oxidation at elevated temperatures.

The 316 stainless steel pipe has become an indispensable material for the industrial sector. This alloy of iron and chrome is recognized for its high resistance to corrosion, as well as its durability. 316 stainless steel tubing can be produced in both seamless and welded tubes to meet specific customer needs.

Titanium’s density is about 60% that of stainless steel and nickel alloys, this weight saving makes it a popular choice in applications where this is critical such as aerospace.

AL6XN is a superaustenitic stainless steel with outstanding resistance to chloride pitting, crevice corrosion and stress corrosion cracking. AL6XN is a 6 moly alloy that was developed for and is used in highly aggressive environments. It has high nickel (24%), molybdenum (6.3%), nitrogen and chromium contents that give it excellent resistance to chloride stress corrosion cracking, chloride pitting, and exceptional general corrosion resistance. AL6XN is primarily used for its improved pitting and crevice corrosion resistance in chlorides. It is a formable and weldable stainless steel.

Nickel based 800 Incoloy Hexagonal Pipe is known to have a good resistance to corrosion. Specifically speaking, the Incoloy 800 Pipe offers sufficient resistance against both carburization as well as oxidation corrosion.

Alloy 800 Weld Neck Flanges We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

ASTM A240 Type 2205 Plate is a duplex stainless steel plate that is used extensively in various industries such as chemical processing, oil and gas exploration, and marine engineering. SA 240 GR 2205 Sheet is made from grade 2205 stainless steel, which is a combination of ferritic and austenitic steel.

UNS N08367 also commonly referred to as alloy AL6XN is a low carbon, high purity, nitrogen-bearing “super-austenitic” nickel-molybdenum alloy with excellent resistance to chloride pitting and crevice corrosion.

Inconel 718 is a nickel-chromium-based alloy that is commonly used in high-temperature applications such as aerospace and gas turbines. One of the most important factors in the production of ASTM B670 Inconel 718 Sheet is the plate rolling process. There are two main types of Inconel 718 plates available on the market: hot rolled and cold rolled plates.

Hastelloy C2000 is available in a variety of sizes and thicknesses, this type of nickel-chromium-molybdenum alloy is renowned for its superior strength and corrosion resistance.

Nilo / Alloy K W.Nr.: 1.3981
UNS: K94610 ASTM F15
Fixed-expansion glass-encapsulated iron-nickel-cobalt alloys, Kovar alloys, have a linear thermal expansion coefficient similar to that of hard glass within a certain temperature range
For mating sealing with hard glass

Hastelloy C2000 Tubes are used in a broad range of industries including petrochemical processing, chemical processing equipment manufacturing, oil refineries and power plants.

SMO 254 Pipes can withstand high mechanical stress and Alloy 254 SMO Pipe high pressure work in high temperatures and corrosive environments.

ASTM A312 TP316 is a standard specification for seamless, straight-seam welded, and heavily cold worked welded austenitic stainless steel pipes used in high-temperature and general corrosive service applications. The 316 Seamless Industrial Steel Pipe is made from a combination of chromium, nickel, and molybdenum, which gives SS 316 Seamless Tube excellent resistance to corrosion and rust.

Nickel Alloy 400 and Monel 400, also known as UNS N04400, is a ductile nickel-copper-based alloy consisting primarily of two-thirds nickel and one-third copper. Nickel Alloy 400 is known for its resistance to a variety of corrosive conditions, including alkalis (or acids), salt water, hydrofluoric acid, and sulfuric acid. Since Monel 400 or Alloy 400 is a cold worked metal, this alloy has high hardness, stiffness and strength. By cold working ASTM B164 UNS N04400 bar stock, the alloy is subjected to higher levels of mechanical stress, which in turn causes changes in the alloy’s microstructure.

Nickel-copper-based alloy 400 Monel 2.4360 cold drawn rod is virtually immune to chloride stress-related corrosion cracking when exposed to corrosive media in typical environments. Monel 400 is a copper and nickel based alloy that is popular today due to its high performance. The alloy has excellent acid and alkali resistance. In addition, it has good tensile strength, ductility, excellent thermal conductivity, and can be hardened by cold work. Additionally, it can be used in applications with temperatures ranging from minus to 538 degrees Celsius.

Incoloy 800H Flange We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

Higher chromium, molybdenum and nitrogen content results in a Pitting Resistance Equivalent Number (PREN) > 40, providing superior pitting and crevice corrosion capabilities to austenitic and duplex stainless steels in virtually all corrosive media, and critical pitting temperature Above 50¡ãC .

Hastelloy Alloys Directory
The Corrosion Resistant HASTELLOY alloys are widely used by the chemical processing industries. The need for reliable performance leads to their acceptance and growth in the areas of energy, health and environmental, oil and gas, pharmaceutical and flue gas desulfurization industries.

Inconel 625 Coil is characterized by its excellent resistance to oxidation, high-temperature corrosion and fatigue. ASTM B443 UNS N06625 Inconel Plate is widely used in the aerospace, chemical processing and oil and gas industries due to its superior strength, toughness and durability even in extreme environments.

304 Piping Spools are made of 304 Stainless Steel, a common and popular material in many industrial applications that require resistance to corrosion and oxidation. These S30400 Piping Spools are prefabricated using specialized machinery and processes, which ensure that they are highly accurate and reliable.

Alloy 800 round bars are used for service at low temperatures, and 800 is also resistant to water corrosion. Incoloy Alloy 800 round bar provides high strength and resistance at elevated temperatures. We supply UNS N08800 round bars in a variety of sizes and thicknesses according to customer requirements.

ASTM A234 Gr. WPB 45 degree elbow, also known as return elbows, functioning to change the direction of flow at a 45 degree angle.

A286 (1.4980) bolts, also known as alloy 660 bolts, are a stainless steel alloy containing iron, nickel and chromium. A286 bolts are known for their high strength, creep resistance and oxidation resistance at elevated temperatures, once age hardened. As a result, A286 bolts provide high strength from room temperature to approximately 1300¡ãF (700¡ãC).

Alloy 317L (UNS S31703) is a molybdenum-containing austenitic stainless steel with significantly improved chemical resistance compared to conventional chromium-nickel austenitic stainless steels such as alloy 304. Additionally, Alloy 317L has higher creep, stress-fracture and tensile strength at elevated temperatures than conventional stainless steels. It is a low carbon or “L” grade that provides resistance to sensitization during welding and other thermal processes.

The SS 304 Elbow is one of the key components in the pressure piping system. It basically helps to change the direction of flow in the pipe run. These ASTM A403 Gr WP304 Buttweld Fittings help to connect two pipes with the same or different nominal diameters so as to change the fluid direction by 45 or 90 degrees.

Alloy 800H rods are designed to have a uniform cross-sectional area and can be produced in square, round or rectangular sizes. Versatile ASTM B408 UNS N08800 rods are rigorously tested to detect and eliminate any defects in these robust assemblies.

For service requiring optimum creep and rupture properties, Incoloy 800H or 800 HT are used. The high contents of nickel and chromium in the alloys also give good corrosion resistance.

We are Manufacturers, Supplier and Exporters of Monel K500 Flanges. These Monel R405 flanges are used with stub end or daft which is butt welded to the pipe with the flange loose behind it.

Werkstoff’s number 2.4602, Inconel Alloy 22, VDM Alloy 22 and ATI 22 alloy fall under same UNS number.

Nickel alloy 601 rods consist of 58-63% nickel. Inconel is a general purpose nickel-chromium-iron alloy. It is popular as an engineering alloy and 601 is best suited for applications requiring heat and corrosion resistance.

Incoloy 925 Flanges, which are made by using finest quality material. Incoloy 925 Threaded Flanges (UNS N09925) can also be used for fasteners, and for pump shafts in marine environments.

S32760 was originally developed as a seawater resistant material for pump applications in the North Sea.

Hastelloy c-22 and c-276 are the only materials resistant to corrosion in wet chlorine, hypochlorite, and chlorine dioxide solutions, with significant resistance to high chloride solutions such as ferric and cupric chlorides. Corrosion resistance.

ASTM A516 CS 70 grade flanges are used in a variety of applications such as bridges, buildings, auto and truck parts, rail vehicles, pressure vessels, boilers, valves, heat exchangers, cargo containers, suitcases, construction equipment, structural pipes and Power poles, etc.

The specification is for pressure piping and fitting in the high or moderate temperature services.ASTM A234 (ASME SA234) pipe fittings after shaping from an elevated temperature, shall be cooled down to a temperature below critical range under suitable conditions which preventing injurious defects caused by too rapid cooling, but in no case more rapidly than the cooling rate in still air. Referring standard in Section 7 of ASTM A960/A960M.

Nickel alloy 718 bolts are also used for superheat power reasons at room or superheated temperatures for first-class corrosion resistance including resistance to pitting and crevice corrosion, in addition to polysulfonic acid strain corrosion cracking.

Stainless steel 304 flanges are a method of connecting pipes, valves, pumps and other equipment to form a piping system. It also facilitates cleaning, inspection or modification. Stainless steel 304 flanges are made from the 18/8 chrome-nickel austenitic stainless steel alloy most used in stainless steel applications.

Hastelloy C22, also known as alloy C22, is a versatile austenitic nickel-chromium-molybdenum-tungsten alloy with enhanced resistance to pitting, crevice corrosion and stress corrosion cracking.s. It is available in the form of plates,
sheets, strips, billets, bars, wires, pipes, tubes, and covered electrodes.

Under reductive conditions, the Inconel 600 Slip on Flange demonstrates excellent resistance to not only inorganic compounds but also organic compounds along with alkali compounds as well

304 SS Weld Neck Flange
Featuring 304 stainless steel for very good corrosion resistance, this GRAINGER APPROVED weld neck flange can be attached to a system via a circumferential weld at the neck. The welded area can be easily examined by radiography. Matched pipe and flange bore reduces turbulence and erosion inside the pipeline. Flange is excellent for use in your critical applications and is ideal for use with air, water, oil, natural gas, and steam.

The formation of ASTM A479 duplex steel UNS S32205 tie rod consists of a pool of austenite surrounded by continuous ferrite phases. ASME SA 479 Duplex Steel UNS S31803 Tie Rods are hot worked in the temperature range of 1750¡ãF to 2100¡ãF. This is designed to reduce the depth used in fabrication, thereby reducing the weight of precise significance for items such as pressure vessels, structural functions, etc. As ASTM A479 dual phase steel for bridges, storage tanks, etc. UNS S32205 rebar has approximately twice the superior performance of SS 304 .

S31803 is the Unified Numbering System (UNS) designation for the original duplex stainless steel. The UNS system was created by multiple trade groups in the 1970s to reduce confusion when the same alloy was called different things, and vice versa. Each metal is represented by a letter followed by five numbers, where the letter represents the metal series, i.e. S for stainless steel.

For paper mill applications requiring lower alloy grades that do not have sufficient corrosion resistance. Based on a 22% chromium content, they have a combined austenitic:ferritic microstructure that provides greater strength, corrosion resistance and cost-effectiveness.

The UNS S31803 (ASTM F51) specification has been largely superseded by UNS S32205 (1.4462, ASTM F60). This reflects their desire to maximize the alloy’s corrosion properties, thanks to the development of the AOD steelmaking process, which allows for tighter control of composition. In addition, it allows to influence the nitrogen addition level rather than just being present as a background element. Therefore, the highest performing duplex grades seek to maximize the content of chromium (Cr), molybdenum (Mo) and nitrogen (N).

SS F317L Flange, SS UNS S31700 Pipe Flanges, Stockist of Stainless Steel 317 Slip On Flanges, Stainless Steel 317 Flanges, SS 317 Blind Flanges Dealer in India, Global Supplier of SS 317L Weld Neck Flange, ANSI B16.5 SS S31703 Orifice Flanges, BS10 Table D, Table E, DIN Standard Flanges.

The premium composition of molybdenum and nickel content of c276 is used to make nickel steel alloys. It helps resist crevice and pitting corrosion in reducing environments. Chromium, on the other hand, is used to impart resistance to oxidizing media.

Steel flanges provide an easy access for cleaning, inspection or modification. They usually come in round shapes but they can also come in square and rectangular forms. The flanges are joined to each other by bolting and joined to the piping system by welding or threading and are designed to the specific pressure ratings; 150lb, 300lb, 400lb, 600lb, 900lb, 1500lb and 2500lb.

A flange can be a plate for covering or closing the end of a pipe. This is called a blind flange. Thus, flanges are considered to be internal components which are used to support mechanical parts.

This nickel alloy is particularly resistant to hydrochloric and hydrofluoric acids when they are de-aerated. As would be expected from its high copper content, alloy 400 is rapidly attacked by nitric acid and ammonia systems.

These Incoloy 800HT Bolt Elbow are made from high quality raw materials resulting in high quality Incoloy 800HT Bolt Elbow. They also have built-in compliance with applicable standards and laws. Additionally, the necessary standards, regulations and guidelines are followed in the manufacture of these Incoloy 800HT Bolted Elbow, resulting in a high quality product. These Incoloy 800HT Bolt Elbow are also well made.

Class 150 ANSI SS 904L Flanges
Featuring 304 stainless steel for very good corrosion resistance, this GRAINGER APPROVED weld neck flange can be attached to a system via a circumferential weld at the neck. The welded area can be easily examined by radiography. Matched pipe and flange bore reduces turbulence and erosion inside the pipeline. Flange is excellent for use in your critical applications and is ideal for use with air, water, oil, natural gas, and steam.

Fundamentally, the Inconel 625 Flanges are considered to be the perfect match for applications that involve nuclear and marine industries.

Duplex 2507 is a super duplex stainless steel designed for applications which demand exceptional strength and corrosion resistance.