steel bar 1.4462 duplex bar titanium round S31803 bar

A789 UNS S31803 and UNS S32205 are two grades of duplex stainless steel that are widely used in various industrial applications. These Duplex S31803 Seamless Pipes are known for their excellent corrosion resistance, high strength, and good weldability. A789 is a specification that covers seamless and welded tubes made from duplex stainless steel.

It is widely used in offshore oil and gas exploration/production and in heat exchangers in petrochemical/chemical processing.

Higher chromium, molybdenum and nitrogen content results in a Pitting Resistance Equivalent Number (PREN) > 40, providing superior pitting and crevice corrosion capabilities to austenitic and duplex stainless steels in virtually all corrosive media, and critical pitting temperature Above 50¡ãC .

ASTM A240 Type 2205 Plate is a duplex stainless steel plate that is used extensively in various industries such as chemical processing, oil and gas exploration, and marine engineering. SA 240 GR 2205 Sheet is made from grade 2205 stainless steel, which is a combination of ferritic and austenitic steel.

Compared with ferrite, it has higher plasticity and toughness, no room temperature brittleness, significantly improved intergranular corrosion resistance and welding performance, and maintained 475 ¡æ brittleness, high thermal conductivity and Superplasticity of ferritic stainless steel. Compared with austenitic stainless steel, its yield strength is significantly improved, and its resistance to intergranular corrosion, stress corrosion, corrosion fatigue and abrasion is significantly improved.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

2507 has Good general corrosion resistance, Suggested for applications up to 600¡ã F, and Low rate of thermal expansion.

The SA 182-F51 S31803 comes under ASME B16.47, B16.48 and B16.5 standards with sizes ranging from 1/8 NB to 48NB.

Super Duplex Steel Stud Bolt is available in lengths ranging from 2mm to 200mm and has high strength values as well. Super Duplex S32750 is the most common duplex ferritic, austenitic stainless steel grade used for producing stud bolts.

As well as greater tensile and yield strength whilst still providing good ductility and resistance to stress corrosion cracking.

It accounts for around 80% of overall duplex stainless steel production.

It is listed in Material Group 2.8 according to ASME B16.5 and ASME B16.47.

The corrosion resistance properties of Duplex 2205 Pipe is much better as compared to alloy grade 316.

The equivalent proportions of their existence make it possible for the alloy to express qualities reminiscent of each steel type. Take austenitic steels, where the most basic grade, like 790 steel duplex pipe, has substantial corrosion resistance properties.

Duplex 2205 stainless steel (both ferritic and austenitic) is used extensively in applications that require good corrosion resistance and strength. This grade offers higher resistance to corrosion

The chemical composition of 2205 Duplex Stainless Pipe consists of the elements being used in the following content i.e. – 22% chromium, 3% molybdenum and about 5 to 6% nickel. Because of the content, in terms of quantity of chromium present in the alloy of this grade, this stainless steel is also referred to as 22cr Duplex 2205 Pipe.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

Pipes that are used in the conveyance of such media need to be durable on account of the stress caused by the flow. Hence, many suppliers recommend using the Duplex Stainless Steel Pipe for the qualities they offer.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

The Duplex Steel Pipe gets its name from the dual nature present in the microstructure of the alloy. Duplex Stainless Steel Seamless Pipe have good mechanical characteristics and can be used in an as welded condition. Considered to be superior in comparison to austenitic alloys ASTM A312 TP304 or ASTM A312 TP316, the Seamless Duplex Pipe offers much better resistance to corrosion.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

ASTM A1082 specification alloy S31803 fasteners have higher pitting and crevice corrosion than stainless steel alloy 316. Due to its higher corrosion resistance, alloy grade UNS S31803 is able to exhibit better fatigue strength than other commonly used austenitic stainless steel grades in environments containing corrosive media.

The applications of the flanges include petroleum, petrochemical, oil and gas and other high performing piping systems.

The chemical composition specifications stated in the norm must be met by the steel Super Duplex Plate. The content, in this case Thick Duplex Alloy 2507 Cold Rolled Sheet, must also meet the required mechanical properties.

S32760 is a super duplex stainless steel with a ferritic-austenitic microstructure.

Super Duplex UNS S32750 bar has excellent resistance to stress corrosion cracking in chlorine containing environments. After heating to a solution treatment temperature of 1080¡ãC to 1120¡ãC, quenching is required.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

Duplex2205 washers are dual phase austentic-ferritic duplex fasteners manufactured from alloy containing chromium, nickel alloy and molybdenum with restricted carbon content and minimum PREN35, SAF2205 fasteners have excellent corrosion resistance and high strength.

The yield strength of this material is almost two times that of the usually used austenitic stainless steel grade.

Duplex Steel S32205 bar stock is a ferritic, duplex, austenitic 3% molybdenum, 22% chromium and 5% – 6% nickel alloy stainless steel.

Duplex 2205 stainless steel (ferritic and austenitic) is widely used in applications requiring good corrosion resistance and strength. Grade S31803 stainless steel was modified several times, resulting in UNS S32205, which was recognized in 1996. This grade provides higher corrosion resistance If we do not stock Duplex 2205 fasteners (imperial or metric), we can manufacture these to your specifications.

Duplex 2205 is a chromium molybdenum blend which combines properties of both ferritic and austenitic steels.

Austenitic has a low strength and a low resistance to stress corrosion cracking, while ferritic also has a low strength, poor weldability and poor low temperature toughness. Producing a chemical composition that combines austenitic and ferritic results in a metal that has a higher strength, good weldability, good toughness and resistance to stress corrosion cracking.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

The flange is second most used joining method after selding. Flanges are used when joints need dismantling. It provides flexibility for maintenance. Flange connects the pipe with various equipment and valves. Breakup flanges are added in the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrdlated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls are required in the selection and application of all there elements to attain a joint, which has acceptable leak tightness.
A flange is a protruded ridge, lip or rim, either external or internal, that serves to increase strength (as the flange of an iron beam such as an I-beam or a T-beam); for easy attachment/transfer of contact force with another object (as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera); or for stabilizing and guiding the movements of a machine or its parts (as the inside flange of a rail car or tram wheel, which keep the wheels from running off the rails). The term “flange” is also used for a kind of tool used to form flanges.

The standard austenitic steels like 304 (1.4301) and ferritic steels like 430 are relatively easy to make and to fabricate. As their names imply, they consist mainly of one phase, austenite or ferrite. Although these types are fine for a wide range of applications, there are some important technical weaknesses in both types.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

The advantages of duplex steels include: good weldability and machinability, high resistance to corrosion fatigue, resistance to stress corrosion cracking (especially chloride stress corrosion cracking), erosion and high energy absorption.

Mixed Austenitic Ferritic Microstructure ¨C The steel gets its name because the microstructure of the 2205 duplex stainless steel fastener alloy is a duplex or duplex alloy. This duality of austenitic ferrite leads to changes in the alloy.

Duplex steel flange also offers Good weldability and workability, High energy absorption and Low thermal expansion.