steel bar 2205 bar steel round S32205 bar

A789 UNS S31803 and UNS S32205 are two grades of duplex stainless steel that are widely used in various industrial applications. These Duplex S31803 Seamless Pipes are known for their excellent corrosion resistance, high strength, and good weldability. A789 is a specification that covers seamless and welded tubes made from duplex stainless steel.

It is widely used in offshore oil and gas exploration/production and in heat exchangers in petrochemical/chemical processing.

ASTM A240 Type 2205 Plate is a duplex stainless steel plate that is used extensively in various industries such as chemical processing, oil and gas exploration, and marine engineering. SA 240 GR 2205 Sheet is made from grade 2205 stainless steel, which is a combination of ferritic and austenitic steel.

Higher chromium, molybdenum and nitrogen content results in a Pitting Resistance Equivalent Number (PREN) > 40, providing superior pitting and crevice corrosion capabilities to austenitic and duplex stainless steels in virtually all corrosive media, and critical pitting temperature Above 50¡ãC .

Grade 2205 is the most widely used duplex stainless steel grade. Fittings of this grade finds applications due to both their excellent corrosion resistance as well as their high strength.

ASTM A479 UNS S32750 / A182 F53 Stud Bolts, which is a threaded rod with two heavy hexagon nuts. In the petroleum and chemical industry, these Super Duplex ASTM A479 UNS S32750 Stud Bolts is the most common bolt used for flanged connections.

The chemical composition of 2205 Duplex Stainless Pipe consists of the elements being used in the following content i.e. – 22% chromium, 3% molybdenum and about 5 to 6% nickel. Because of the content, in terms of quantity of chromium present in the alloy of this grade, this stainless steel is also referred to as 22cr Duplex 2205 Pipe.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

Super Duplex UNS S32760 is one of the most common super duplex grades on the market. UNS S32760 is a duplex stainless steel designed for use in corrosive chlorine-containing environments, with the addition of W and Cu compared to UNS S32750.

ASTM A479 Duplex Steel UNS S32205 Round Gaskets are nitrogen reinforced duplex alloys formed to address common corrosion problems found incidentally with 300 series alloys. ASME SA 479 Duplex Steel UNS S31803 Machined Washers are hardened at 1868 to 1958 degrees Fahrenheit and then water quenched.

ASTM A240 Duplex 2205 Sheets contains approximately 40-50% ferrite. Often referred to as the work horse grade 2205 is the most widely used grade in the duplex family of stainless steels.

The ASTM A182 F51 flanges refer to standard or non-standard flanges manufactured in accordance with ASTM A182 Grade F51, which is designated with UNS number S31803.

Duplex UNS S32750 coils have very low corrosion rates under very high corrosive conditions.

A Super Duplex 2507 Pipe has outstanding resistance to corrosive and oxidative media.

Usage of Duplex 2507 should be limited to applications below 600¡ã F (316¡ã C). Extended elevated temperature exposure can reduce both the toughness and corrosion resistance of alloy 2507.

The advantage of the dual-phase structure is that it combines the stress corrosion cracking resistance and high strength of ferritic alloys with the ease of manufacture and corrosion resistance of austenitic stainless steel alloys.

ASTM A240 Type 2507 Duplex Sheet is an alloy used in applications with high strength and corrosion resistance. The composition of the duplex 2507 sheet is approximately 25% chromium, 7% nickel and 4% molybdenum. This composition makes it resistant to crevice corrosion and chloride pitting.

Super Duplex Steel Stud Bolt is available in lengths ranging from 2mm to 200mm and has high strength values as well. Super Duplex S32750 is the most common duplex ferritic, austenitic stainless steel grade used for producing stud bolts.

The corrosion resistance properties of Duplex 2205 Pipe is much better as compared to alloy grade 316.

The temperature in heat exchange is usually increased because they work according to the principle of heat transfer. While A789 tubing can hold its own at high temperatures, it is not recommended for use in temperatures above 600F. Duplex 2205 Tube may become brittle and rot at temperatures above 600F.

La tuberia soldada ASTM A790 UNS S32205 se fabrica para obtener una resistencia adicional. Los tubos soldados se laminan en caliente, mientras que los tubos sin costura se estiran en frio.Ambos pueden reforzarse aun mas mediante el trabajo en frio, pero hasta cierto punto.

UNS S31803/2205 is a dual-phase steel grade with a ferritic-austenitic microstructure. The alloy consists of approximately 40-50% ferrite in the annealed condition.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.45

Duplex 2507 is a super duplex stainless steel containing 25% chromium, 4% molybdenum and 7% nickel. This alloy is designed for applications requiring excellent strength and corrosion resistance.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

S32760 is a super duplex stainless steel with a ferritic-austenitic microstructure.

The corrosion resistance comes from the addition of alloying material, mostly the chromium content. The ASTM A790 Pipes are resistant to pitting corrosion and crevice corrosion. The pipes could also be electric fusion welded.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Additionally, Duplex 2205 is the most widely used duplex grade on the market. Duplex 2205 alloy is a nitrogen-enhanced duplex stainless steel alloy. The effect of nitrogen is to significantly increase the corrosion resistance of the alloy; especially in the as-welded condition.

The mechanical strength, corrosion resistance and low temperature toughness of the ASTM A182 F53 Flanges is higher than that of ordinary duplex stainless steels.

Inhibiting deformation and cracking at high temperatures, the dual phase steel S31803 / S32205 reducer is superior to common steel parts in the chemical industry that are susceptible to chloride stress corrosion cracking. With flue gas desulfurization machinery. Tees such as ASME A182 Duplex Steel S31803/S32205 are known to have good resistance to high toxicity and elasticity.

2507 is also used in Flue Gas Scrubbing Equipment, Pulp and Paper Mill Equipment, Offshore Oil production/technology and Oil and gas industry equipment.

In S31803, about half of the ferrite grains transform into austenite grains (“islands”) as the material cools to room temperature. The result is a microstructure of approximately 50% austenite and 50% ferrite.

Duplex 2205 is a nitrogen enhanced duplex stainless steel designed to solve common corrosion problems encountered with 300 series stainless steels. “Duplex” describes a family of stainless steels that are neither fully austenitic (such as 304 stainless steel) nor purely ferritic (such as 430 stainless steel).
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.48

Duplex bolts S31803 are widely used in several industries due to the enhanced strength transferred from the structural austenitic portion. In contrast, the ferritic fraction instills superior toughness from the transport of the fine structure. UNS S31803 Fasteners with excellent mechanical properties can become a buyer’s favorite by pre-reducing the cross-section of the final product, thereby reducing the overall weight, thus lowering the overall price.

As experts in the field of fasteners, we recognize that this alloy can be used in a variety of applications including heat exchangers, piping, pressure vessels, tanks, fans, pulp and paper equipment, oilfield equipment and press rolls. At HT PIPE you can find Duplex Premium Gaskets in high quality.