Steel Bars & Rods

The advantages of stainless steel bar include long material life, corrosion resistance, attractive appearance, ease of manufacture, impact resistance and long-term value. Stainless steel is one of the most widely used metals in modern construction.
Standard SUS, AISI, DIN
Diameter 5~500mm
Length ¨Q12M or As Per Clients’ Requirements

The stainless steel rectangular bar 304 can be hot rolled or cold drawn. Stainless Steel Rectangular Bars are ideal for structural applications where strength, toughness and excellent corrosion resistance are required. It also maintains excellent load-bearing properties, high corrosion resistance, excellent durability, high strength-to-weight ratio, good thermal and electrical conductivity, and more.

Inconel 718 is a high strength nickel base superalloy for long term service at low temperatures of 1200¡ãF. The alloy is easy to manufacture and can be welded in the annealed or precipitation (age) hardened condition. Annealed 1700-1850¡ãF, air cooled or faster. Aged 8 hours at 1325¡ãF with furnace cooling held at 1150¡ãF for a total age of 18 hours with air cooling. Alloy 718 exhibits a shrinkage of 0.0008 in/in after precipitation hardening.
Standard SUS, AISI, DIN
Diameter 5~500mm
Length ¨Q12M or As Per Clients’ Requirements

Inconel 600 is a nickel-based alloy with excellent carburization and good oxidation resistance at high temperatures. This alloy has long been used in the heat treatment industry for many of the same applications as RA330. Alloy 600 has useful resistance to dry Cl2 and HCl gases at moderately elevated temperatures. Due to the elevated nickel content, alloy 600 is not recommended for use in red hot conditions when sulfur is present.
Standard SUS, AISI, DIN
Diameter 5~500mm
Length ¨Q12M or As Per Clients’ Requirements

Alloy 400 has excellent resistance to neutral and alkaline salts. It has been the standard material in salt mills for many years.
Standard SUS, AISI, DIN
Diameter 5~500mm
Length ¨Q12M or As Per Clients’ Requirements

Inconel 600 is a nickel-chromium-iron alloy with excellent corrosion resistance, oxidation resistance and high strength at elevated temperatures. Due to its high nickel content, Inconel 600 is extremely resistant to chloride ion stress corrosion cracking. Age hardening is not required as Inconel 600 is hardened and strengthened by cold work only. The Inconel 600 can operate in temperatures as low as 700¡ãF (370¡ãC).
Standard SUS, AISI, DIN
Diameter 5~500mm
Length ¨Q12M or As Per Clients’ Requirements

Common applications of aluminum round bar include supports, trim, shaft, braces, pins, and dowels. Brass round bars are used when strength, electrical conductivity, corrosion resistance, and spark resistance are important. Brass is easy to machine and has an attractive sheen when polished.
Standard SUS, AISI, DIN
Diameter 5~500mm
Length ¨Q12M or As Per Clients’ Requirements

A round bar is a long cylindrical metal bar stock that has many industrial and commercial applications. The most common application is shafts. Products are usually measured by measuring their diameter. Standard diameters range from 1/4″ all the way up to 24″. Other sizes may be available.
Standard SUS, AISI, DIN
Diameter 5~500mm
Length ¨Q12M or As Per Clients’ Requirements

Steel bars are widely used in industrial maintenance, farm implements, transportation equipment, decorative iron products, fences, artwork, etc. This steel shape is easy to weld, cut, form and drill with the proper equipment and knowledge.
Standard SUS, AISI, DIN
Diameter 5~500mm
Length ¨Q12M or As Per Clients’ Requirements

Round bars are widely used in the machining industry due to their ability to be easily machined and cut. One of the most impressive properties of stainless steel is chromium, which makes it extremely resistant to corrosion. Stainless steel round bars can be found in the food industry, automotive components and machine parts in the manufacturing and construction industries.
Standard SUS, AISI, DIN
Diameter 5~500mm
Length ¨Q12M or As Per Clients’ Requirements

Round bars are cold drawn and annealed, available in stock lengths or cut to size. Alloy round bars provide strength and corrosion resistance in a variety of environments and can be used in the frame, machine part manufacturing, food service and medical device industries.
Standard SUS, AISI, DIN
Diameter 5~500mm
Length ¨Q12M or As Per Clients’ Requirements

Alloy steels have added alloying elements such as manganese and nickel. These elements increase the strength, hardness and toughness of metals. Added elements make alloy steels ideal for demanding industrial applications.
Standard SUS, AISI, DIN
Diameter 5~500mm
Length ¨Q12M or As Per Clients’ Requirements

4140 Alloy Steel Round Bar, a cold drawn annealed steel with high hardenability, its chromium content provides good hardness penetration, and molybdenum imparts hardness uniformity and high strength. 4140 alloy steel rounds respond well to heat treatment and are relatively easy to machine in the annealed condition. 4140 alloy steel round has good strength and wear resistance, excellent toughness, plus good ductility, and the ability to resist stress at high temperature.
Standard SUS, AISI, DIN
Diameter 5~500mm
Length ¨Q12M or As Per Clients’ Requirements

304 stainless steel is the most common form of stainless steel used around the world due to excellent corrosion resistance and value. 304 can withstand corrosion from most oxidizing acids. That durability makes 304 easy to sanitize, and therefore ideal for kitchen and food applications.
Standard SUS, AISI, DIN
Diameter 5~500mm
Length ¨Q12M or As Per Clients’ Requirements

To be classified as an alloy bar, a range or minimum amount of alloying elements such as nickel, molybdenum, chromium, vanadium, etc. is specified or elements are added to obtain an alloying effect.
Standard SUS, AISI, DIN
Diameter 5~500mm
Length ¨Q12M or As Per Clients’ Requirements

ASTM A276 is a specification that considers various categories of stainless steel bar or bar produced in different forms. Stainless steel A276 threaded rods are available and supplied in many conditions.

Alloy steel round bars consist of different material grades such as A-182, F5, F9, F11, F12, F22 and F91. They are made from a variety of corrosion-resistant and strong metal alloys.
Standard SUS, AISI, DIN
Diameter 5~500mm
Length ¨Q12M or As Per Clients’ Requirements

Type 347 stainless steel has slightly improved corrosion resistance in strongly oxidizing environments than Type 321 stainless steel. Type 347 is stabilized with columbium and is more suitable for aqueous and low temperature environments due to its good resistance to intergranular corrosion. Both 347 and 321 have good resistance to polythionate stress corrosion cracking encountered in refineries. The high temperature oxidation resistance of 347 is similar to that of 304 stainless steel. For 1500¡ãF.
Standard SUS, AISI, DIN
Diameter 5~500mm
Length ¨Q12M or As Per Clients’ Requirements

Alloy steel round bars provide good weldability without compromising the wear and impact resistance of the steel. Common uses of alloy steel round bars include structural applications in gears, fasteners, and aircraft applications.

Like other austenitic grades, these grades have excellent toughness even down to low temperatures, although other grades are often used in this environment.
Grade 310sL (and a proprietary version of this grade), a version of the 310s with a maximum carbon content of 0.03%, is sometimes used in very specific corrosive environments, such as urea production.

Our 347 stainless steel bars are extremely resistant to prolonged heat and corrosion, making them ideal for power generation, engines, welded fabrication and other high temperature applications. Also known as UNS S34700 bars, these 347 stainless steel bars have superior creep and stress rupture properties compared to other grades such as 304 stainless steel, with excellent mechanical properties.

These bars are also beneficial in applications where the annealing procedure needs to be omitted after welding. Also known as WNR 1.4550 bars, these SS 347 bars are available to our valued customers in a different range of diameters, wall thicknesses and sizes at market leading prices.

Round bars are long cylindrical metal raw materials that are used in different industries. 254 SMO round bar is an austenitic stainless steel. These bars have good nickel, chromium and molybdenum chemistries. This makes these bars resistant to oxidation and all forms of corrosion.

SMO 254 round bar has good mechanical properties. The minimum tensile strength of these bars is 650Mpa and the minimum yield strength is 300Mpa. All of these bars can be stretched by 35%. They are widely used in petrochemical, offshore drilling, pharmaceutical industry, chemical industry, etc. Our agency is a leading manufacturer and supplier of SMO 254 round bars. Our goal is to produce and supply the best products at reasonable prices.

321 Stainless Steel Square Bar It can be categorically said that rebar is one of the core components of any manufacturing industry or any industry that relies on machinery. Widely used in automotive, textile, manufacturing, construction, cement, shipbuilding, paper and pulp, defense, heavy earthmoving equipment or aerospace.

The balanced austenitic structure of Grade 321 enables deep drawing without intermediate annealing, which makes this grade dominant in the manufacture of drawn stainless steel parts such as sinks, hollowware and pans.

Stainless Steel 410 Hollow Rod resists grain boundary precipitation structures in the weld heat affected zone, which makes it useful for most welding forms of chemical procedures. These stainless steel 410 hex bars have good resistance to stress corrosion cracking and pitting corrosion. Well, the low carbon content in these stainless steel 410 triangular bars minimizes grain boundary carbide precipitation throughout the welding process, designed to maintain corrosion resistance in the heat affected zone of the welded joint.

904l Stainless Steel Round Bar It can be categorically said that rebar is one of the core components of any manufacturing industry or any industry that relies on machinery. Widely used in automotive, textile, manufacturing, construction, cement, shipbuilding, paper and pulp, defense, heavy earthmoving equipment or aerospace.

ASTM A479 310s Round Bars can clearly say that rebar is one of the core components of any manufacturing industry or any industry that relies on machinery. Widely used in automotive, textile, manufacturing, construction, cement, shipbuilding, paper and pulp, defense, heavy earthmoving equipment or aerospace.

Grade 310 stainless steel, combining excellent high temperature performance with good ductility and weldability, designed for high temperature service. In the absence of reducing sulfur gas, it resists oxidation in continuous operation at temperatures up to 1150¡ãC. It can also be used for intermittent service at temperatures up to 1040¡ãC.