Steel Fasteners

317 Stainless Steel Threaded Rods are austenitic stainless steel threaded rods made from alloys containing chromium, nickel and molybdenum. Stainless steel 317 threaded rod for use in corrosive environments. ASTM A276 Type 317 is a material grade specification for 317 stainless steel cold-worked or hot-worked bar in round, square, hexagonal, and other hot-rolled extruded shapes. The ASTM A276 specification covers the chemical composition, mechanical properties, heat treatment, and other supplemental requirements for 317 stainless steel round, square, hexagonal, and other extruded profiles.

AISI 904L threaded rods are further reduced to required lengths and chamfered as stud threaded rods when required to hold components such as flanges, valves, filters and other plumbing components together. Also, SS 904L threaded rod is a recommended austenitic alloy for functions where SS 316l or SS 317l cannot provide basic corrosion resistance.

Originally developed to combat seawater corrosion, AL6XN has expanded its role as a good mid-range corrosion resistant alloy. AL6XN screw is a low carbon, high purity, nitrogen containing “super austenitic” stainless steel alloy. AL 6XN threaded rods are super austenitic AL 6XN threaded rods are super austenitic, made from an alloy containing limited carbon content of chromium, nickel and molybdenum. AL 6XN threaded rod is resistant to chloride stress corrosion cracking.

Alloy 304 Studs (Din 1.4301 Studs) Stainless Steel UNS S30400 Studs are commonly used in the brewing industry such as pipes, fermenters, yeast trays, railway vehicles and warehouses. Due to the high work hardening rate of these alloy 304 studs, intermediate annealing may be required to successfully manufacture the part. These annealed grade 304 studs have better heat and corrosion resistance than Type 301 and 302 stainless steels, they are not very conductive or thermally conductive, and are non-magnetic.

The lower carbon content of the stainless steel 304 thread bar reduces chromium carbide precipitation from welding and its susceptibility to intergranular corrosion. Stainless steel 304 studs are not particularly thermally or electrically conductive and are non-magnetic. The large number of Style 304 Stud Bolts we manufacture today can be used in products related to the food and beverage industry. These AISI 304 studs are ideal for milk processing, brewing and winemaking as well as yeast trays, pipes, fermentation vats and storage tanks.

Since stainless steel 309 studs have met all the challenges of providing quality, timely, cost-effective solutions for fastener applications. Every product of Grade 309 SS Bolts is designed to your requirements and specifications.

Stainless steel UNS S31600 studs are commonly used for welded or braided screens in mining, water filtration and quarrying. In addition to molybdenum, SS 316 threaded rod includes many other components in a variety of applications. SS 316 Studs perform the same as Stainless Steel 304 except that it is somewhat stronger at high temperatures. Stainless steel 316Ti studs have higher strength and durability than other grades of stainless steel studs. It is made of high-quality raw materials, exceeding the specific needs of the user, thus ensuring complete satisfaction. Not only that, but the threads extend outward along the full length of the rod. Now, talking about sizes and lengths from 3mm to 200mm and M02 to M33. Its standards are ASME and ASTM.

AISI 904L Studs are used to hold components together such as flanges, valves, filters and other plumbing components. Common AISI 904L stud types include full or continuous thread studs, tap end thread studs, stud studs, stud short shank studs, welded studs bolts etc. These alloy 904L studs are also an austenitic alloy, which means that iron carbide or a non-magnetic solid solution of carbon in iron is used to improve corrosion resistance. Welding of our Style 904L Stud Bolts can be performed using all conventional methods, in addition it does not require preheat and post weld heat treatment and can withstand hot cracking in constrained weldments.

Class 660 has several different grades, categorized alphabetically, A and B. Common items include 660B Studs. Although chemically identical, each class has different solution and hardening treatments, resulting in different mechanical properties. ASTM A453 Grade 660 Stud Bolt is a precipitation hardened stainless steel fastener. Austenitic alloy ASTM A453 grade 660 nuts are known for their impressive tensile strength properties, even when exposed to high temperatures.

ASTM A453 covers 5 grades of bolts with 12 yield strength grades ranging from 50 to 120 ksi [345 to 827 Mpa] for high temperature applications such as fasteners for pressure vessel and valve flanges. Specifications are expressed in inch-pound units and SI units. Known as precipitation hardening stainless steel, this alloy is an austenitic grade that may sometimes be referred to as a nickel alloy. This is because ASTM A453 Grade 660 bolts are alloyed with relatively high nickel content for any stainless steel.

254 SMO is a high alloy austenitic stainless steel developed for use in seawater and other corrosive chlorine-containing media. The steel has the following properties: excellent resistance to pitting and crevice corrosion, high resistance to general corrosion and high resistance to stress corrosion cracking. 254 SMo / EN 1.4547 / UNS S31254 / 6Mo are generally used in pumps, valves, chokes, pipes/flanges and washers and have a high resistance to general corrosion.

ASTM A453 Grade 660 bolts are alloys with relatively high nickel content. Stainless Steel ASTM A453 Grade 660 Grade D washer has excellent corrosion resistance but also excellent resistance to intergranular corrosion after welding or stress relief.

254 SMo UNS S31254 super austenitic steel combines moderate tensile strength with high ductility for excellent corrosion resistance in seawater and various industrial environments. SMO 254 washer is effective against pitting, crevice corrosion and chloride stress corrosion cracking. 254 SMO washer is known for high ductility and good impact strength.

AL6XN material is known for its amazing corrosion resistance. It is widely used due to its high strength, good weldability, good formability and good corrosion resistance. Owners can establish an accurate return on investment because it provides a stable and reliable value. These alloys AL6XN washer are premium used materials manufactured to national and international specifications. Due to its efficiency, corrosion resistance and optimum performance, we can also customize to the specific needs of our customers.

ASTM A312 TP 310 is a medium carbon austenitic stainless steel suitable for high pressure and high temperature service. There are different grades such as ASME A213 and 312. Grade 310 is an austenitic stainless steel with excellent high temperature properties, as well as good ductility and weldability. Type 310 stainless steel tubing is typically used in high temperature applications. The high chromium and nickel content of grade 310 steel pipe provides excellent corrosion and oxidation resistance, as well as excellent strength at temperatures up to 2100¡ãF.

ASTM A213 TP 310 Pipe consists of 24% Chromium, 19% Nickel, Sulfur, Phosphorus, Silicon, Manganese and Carbon. Higher chromium and nickel content also makes it superior to 304 or 309 stainless steel. The material also has a minimum yield strength of 205 MPa and a minimum tensile strength of 520 MPa. The elongation is 40%, and the Brinell hardness of the 310 stainless steel pipe is 225HBW.

316 stainless steel washer is commonly used in gas/oil/oil, aerospace, food and beverage, industrial, cryogenic, construction and marine applications. 316 stainless steel has high strength and excellent corrosion resistance, including in marine or extremely corrosive environments. At the same time, stainless steel 316 washer is an austenitic stainless steel grade tube with good resistance to chloride ion corrosion stress cracking. Therefore, the pipe can be easily used for marine and seawater applications.

These are stainless steel washers with high oxidation resistance. Stainless steel 316Ti gaskets are commonly found in areas where oxidation is avoided, including furnaces, paper mill equipment, heat treatment, and more. These applications typically expose gaskets to acetic and citric acids, sulfur dioxide and ammonia to resist corrosion. The stainless steel 316Ti split gasket is designed for higher temperatures because it has a lower carbon content to prevent embrittlement.

317 stainless steel, also known as UNS S31700 and grades 317, consists primarily of 18 to 20 percent chromium and 11 to 15 percent nickel, with traces of carbon, phosphorus, sulfur, silicon, and iron. ASTM A276 317 Materials It can be clearly stated that rebar is one of the core components of any manufacturing industry or any industry that relies on machinery.

These SS 347 flat washers offer high strength, good corrosion resistance, good mechanical properties up to 600¡ãF (316¡ãC), and good toughness in the base metal and weld. Our stainless steel 347 lock washers are widely used in the aerospace, chemical, petrochemical, food processing, paper and general metalworking industries. At the same time, Din 1.4550 washers are slightly tougher than SS 304 and will produce equally tough sticky chips. Stainless Steel 347 Punch Washers have excellent resistance to intergranular corrosion when exposed to temperatures in the 800 ¨C 1500¡ãF (427 ¨C 816¡ãC) range for chromium carbide precipitation.

We offer products such as stainless steel 347 lock washers in various grades for optimum performance and robust use in applications critical to any sector or industry. Alloy 347H Washers (Din 1.4961 Washers) Stainless steel 347H square washers improve intergranular corrosion resistance and also reduce the tendency to form continuous chromium carbide networks at grain boundaries.

Stainless steel WNR 1.4550 washers have serrations that extend radially inward or outward to bite into the bearing surface. If a flat washer is required to span a large hole in the assembly, a nyloc nut (nylon insert) must be used. 347 stainless steel washers are austenitic stainless steel washers made from an alloy containing chromium, nickel, molybdenum and nitrogen with limited carbon content. Stainless steel 347 gaskets are used in corrosive environments.

904L stainless steel washers are unstabilized austenitic stainless steel washers made from an alloy containing chromium, nickel, molybdenum and nitrogen with limited carbon content. Stainless steel 904L gaskets are used for low temperature service and highly corrosive environments. Meanwhile, the SS 904L gasket is an austenitic stainless steel for severely corrosive conditions. Stainless steel UNS NO8904 gaskets are useful for details in the marine environment, chemical and pharmaceutical industries.

AL 6XN gaskets are super austenitic AL 6XN gaskets are super austenitic, made from an alloy containing limited carbon content of chromium, nickel and molybdenum. AL 6XN gaskets are resistant to chloride stress corrosion cracking. AL6XN gaskets are made from an alloy that is a super-austenitic metal that resists crevice corrosion, pitting corrosion, chloride-induced corrosion and stress corrosion cracking. It is also resistant to alkaline and salt solutions, protects products from metal contamination and prevents corrosion in fluid delivery systems.

SS 254 SMO washer is a high-alloy austenitic stainless steel developed for use in seawater and other aggressive chlorine-containing media. ASTM A312 Stainless Steel 254 SMO washer is a very high end austenitic alloy designed for maximum resistance to pitting and crevice corrosion. 254SMo contains high levels of chromium, molybdenum and nitrogen, making it particularly suitable for high chlorine environments such as brackish water, seawater, pulp mill bleaching plants and other high chlorine process streams.

Stainless steel 317 washer has the best corrosion resistance to environments containing chlorides. Stainless steel 317 washer is a high chromium, nickel and molybdenum version of 316 stainless steel, primarily used for strength and corrosion resistance.

AISI 904L washers are thin flat ring-type assemblies that are bolted between a bolt and a nut to evenly distribute the load on threaded fasteners. Stainless steel 904L washer has excellent resistance to general corrosion, pitting and crevice corrosion in chemicals containing chlorides and sulfuric, phosphoric and nitric acids. SS 904L washer also contains niobium for stabilization against sensitization and resulting intergranular corrosion, a transformation that is not complete until temperatures drop to 90 degrees Fahrenheit.

AL-6XN is an alloy that is an austenitic stainless steel. It is often referred to as a super austenitic stainless steel because it has several useful properties. One of the main benefits of using al6xn bolts is that it can be used in high temperatures. Meanwhile, AL6XN is a super austenitic alloy, and the most abundant element is iron. It is the most popular of the 6% molybdenum alloys. Common uses are in the food processing, pharmaceutical and biotechnology industries. It exhibits superior corrosion resistance compared to duplex alloys in most environments. Due to the lower nickel content, AL6XN fasteners are generally more economical than high nickel alloy fasteners.

Stainless steel 316Ti hex head bolts are typically used in areas that can withstand higher temperatures than Type 304, and their low carbon makes them resistant to carbon precipitation. However, like many stainless steels, stainless steel 316Ti hex head bolts are susceptible to warm chlorine environments and can develop pits and cracks.

ASTM A276 Type 316Ti is a material grade specification for 316Ti stainless steel cold-worked or hot-worked bar in round, square, hexagonal, and other hot-rolled extruded shapes. Alloy 316Ti studs do show surface corrosion, usually as a brown staining, which is particularly relevant for cracks and rough surface finish. The low thermal conductivity of austenitic alloys such as 316Ti studs causes heat to concentrate on the cutting edge, which means that coolants and lubricants are required and must be used in large quantities.