Butt Weld Pipe Fittings

ASTM A860 WPHY 52 Fittings is a Wrought high Yield strength fittings as its feature and grade itself suggest about its high yield strength of the fittings. ASTM A860 MSS SP 75 WPHY 52 Fittings are generally used at High Pressure requirements.

Alloy Steel Weld Fittings is a pipe attachment detail in which a pipe is inserted into a recessed area of a Valve, fitting or flange. It is mainly used small pipe diameters generally for piping whose nominal diameter is NPS 2 or smaller. Its tensile strength of is between 758-1882 MPa which is higher than the tensile strength of stainless steel.

The properties of ASTM A860 Grade WPHY 56 Buttweld Pipe Fittings are Good machining properties, Good oxidation resistance in intermittent service to 870¡ãC and in continuous service to 925¡ãC, Good resistance to carbide precipitation, Excellent corrosion resistance in a wide range of atmospheric environments.

A234 WP91 is one of the steel grade in ASTM A234 standard.W means weldable,P means pressure,91 is grade 91.the starting material is ASTM A335 Gr P91 Seamless pipes,widely used for POWER PLANT FABRICATION,Chemical & Fertilizers, Power Generation and Nuclear Industries.

The ASTM A234 WP5 specification consists of wrought carbon steel and alloy steel in seamless and welded form. The ASTM A234 WP5 Pipe Fittings are widely used in pressure vessel fabrication. These fittings have application under moderate to high temperatures and can also be effectively used in pressure piping systems.

ASTM A234 WPB Pipe Fittings belong to a group of pipes and fittings that are intended for moderate to high temperature services with pressure piping. The A234 is the specification for the moderate to high temperature services where the WPB stands for grade B pressure and weldable pipes.

ASTM A420 is the standard specification for pipe fittings of wrought carbon steel and alloy steel for low temperature service. These fitting, either of seamless or welded construction, are primarily used in pressure piping and pressure vessel service at low temperatures. Metals-Piping can provide all the four steel grades covered by ASTM A420: WPL6, WPL9, WPL3, and WPL8.

Inconel 625 Fittings are made up of an nickel alloy that is non ¨C magnetic. It has high toughness and strength. The material is corrosion resistant and oxidation resistant.

ASTM B366 pipe fitting is used to connect straight pipe sections, adapt to different sizes or shapes and for other purposes, such as regulating(or measuing) fluid flow. These fittings are maded as per application requirements in different outer diameter and inner diameter with specified surface. HT pipe is a global distributor of nickel alloy pipe fittings in different sizes. Our company is constantly executing regualr as well as customised order for pipe fittings for sectors like oil and gas, engineering, etc.

UNS S31254 Pipe Fittings which is described as a 6 % Mo super austenitic stainless steel. These Duplex Steel UNS S31254 Butt Weld Fittings is a lustrous, silvery colored Molybdenum metal which has an abundance of 1.5 ppm in the earth¡¯s crust. Our Duplex Steel UNS S31254 Pipe Fittings is a high-alloy austenitic stainless steel developed for use in seawater and other aggressive chloride-bearing media. The driving force to the development of these Stainless Steel SMO 254 Buttweld Fittings was the sensitivity to inter-granular corrosion of existing austenitic steels which often contained 0.08 % – 0.10 % carbon. Our Duplex Steel F44 Buttweld Pipe Fittings combines moderately good mechanical strength and high ductility with excellent corrosion resistance in a variety of environments.

Inconel 625 pipe fittings are available in ATSM B366 and ASME SB366 specifications. The tensile strength of Din 2.4856 Welded Buttweld Fittings is 1,35,000 psi 930 MPsand yield strength is 75,000 psi 517 MPa. UNS N06625 Cross are manufactured using push, cast, press, and forge processes. These fittings are available in the price range of Rs. 12,700 to Rs 2 lakh. We are among the leading manufacturers of alloy 625 reducer fittings and provide you the best quality product at an affordable price. Customer satisfaction is our ultimate goal. We assist in choosing the fittings as per the customers’ needs and specifications.

The UNS N10276 Fittings have high tensile strength even at elevated temperatures and demonstrate good performance under high pressure. The tensile strength of the ASTM B366 UNS N10276 Stub End is about 105.4 Ksi.The ASTM B366 WPHC276 End Cap has great fabrication properties. B366 WPHC276 is easily fabricated by cold working. Although the Grade WPHC276 Reducer can be hot worked, the process needs to be carried out adhering to certain parameters

A234 WP11 Fittings can effectively be bent and welded. ASME SA 234 wp11 that shape important associations between different pipes of different sizes. Elbow A234 WP11 is the free machining adaptation of this grade, accessible in bar shape for utilizing in automatic screw machines.

CS Gr A860 WPHY 52 Seamless Butt Weld Fittings have to be heat treated in order to achieve optimum tensile strength properties. The high strength obtained by these seamless or welded Carbon Steel WPHY 52 pipe Fittings could be increased by subjecting the material through processes such as normalizing, quenching, and tempering or stress relieving.

Butt weld fittings connect with pipe to deliver air, water, natural gas, and oil in plumbing applications and food and dairy processing. Butt weld (BW) fittings form pipe joints with strength, fatigue, corrosion resistance, and temperature compliance.

Nickel alloys pipe fittings are metals made from combining nickel as the primary element with another material. It merges two materials to deliver more desirable features, such as higher strength or corrosion-resistance. Because of its unique properties, it’s used in a variety of equipment spanning multiple industries.

Being a two ¨C phase material (austenitic ¨C ferritic) stainless Steel BW Pipe Fittings will present a different tool wear profile from that of single ¨C phase steels of type 304L.

Alloy 20 pipe fitting is a chromium-iron-nickel-based, austenitic alloy that comes with excellent corrosion resistance in chemical environments. It contains sulfuric acid and many aggressive media well. The alloy is stabilized with niobium that helps it to resist intergranular corrosion.

Stainless Steel Elbow Buttweld Welded Pipe Fittings?is primarily noted for heat and oxidation resistance it also has good resistance to chloride stress ¨C corrosion cracking, carburization, and excellent resistance to reducing or carburizing atmospheres.

Stainless steel pipe fitting is part that connect pipe to pipe, its purpose to connect, control and change the direction, split, sealed, support various parts and components in pipeline system, selecting and preparing proper pipe fitting to joint together, there are various types, sizes, grades & specifications to meet specific requirement.

The stainless steel 45 degree butt weld elbow is a pipe fitting that is attached to two pieces of pipe to allow a change in direction. Stainless steel butt weld elbows can come in various degrees of angles and schedules. The most common angles available are 45 degree elbows and 90 degree elbows. 90 degree elbows are available in long radius and short radius.

A butt weld pipe reducer enables there to be a change in pipe size to meet certain hydraulic flow requirements or sometimes it’s just a matter of connecting two different pipe sizes. An eccentric butt welding reducer is a pipe fitting that is used when a pipe on the upstream side of the fitting is larger than the downstream side of the fitting.

Hastelloy C-276 pipe fittings refer to factory-made wrought nickel alloy fittings manufactured to ASTM B366 UNS N10276. It can be designated as CRHC276(corrosion resistant fittings) or WPHC276(ASME pressure fittings). The fittings can be manufactured from pipe or tube of ASTM B619, B622, B626 UNS N10276, plate, sheet or strip of ASTM B575 UNS N10276, forging or bar of ASTM B564, B462, B472, B574 Gr. N10276. The Hastelloy C-276 fittings are mainly furnished in 3 connection types: butt welding, threaded, socket welding, covering a variety of standard specifications.

Hastelloy C276 Fittings is used in high temperature and high corrosion prone applications. The material is corrosion resistant and heat resistant because of its unique composition. It is a nickel molybdenum chromium super alloy that is stabilized with tungsten. The Hastelloy C276 Fittings come under the ASTM B366 specification. HT pipe is a leading supplier and manufacturer of these fittings in different types, sizes and threads. There are seamless fittings and buttweld fittings.

Inconel 625 Pipe Fittings are strong and are used in high corrosive applications that need stronger pipes. The material is a nickel chromium molybdenum alloy with niobium in the composition for stabilization. It can operate from cryogenic temperatures up to 1093 degrees Celsius. So the fittings are preferable for applications that require high strength, corrosion resistance and high temperature resistance. The Alloy 625 Buttweld Fittings are used with ease of welding and this is the most used type of fittings. The Inconel UNS N06625 Pipe Elbow is used to turn the pipe away by an angle, usually 45 degrees or 90 degrees. The ANSI B16.9 ASTM B366 625 Inconel Monel Tee can range from ? inches to 48 inches in nominal bore size and it branches a pipe into two.

Hastelloy Alloy C276 Pipe Fittings, which are used as matching composition filler material for welding alloy, wrought and cast products. For optimum corrosion performance in Hastelloy C276 Butt Weld Fittings, therefore, the re-annealing of cold worked parts is important. To obtain a reducing media in Hastelloy C276 Elbow Pipe Fittings, add 2 % (by volume) of either ethyl or propyl alcohol to water. During machining, Hastelloy C276 Tee Pipe Fittings work harden rapidly, generate high heat during cutting, weld to the cutting tool surface and offer high resistance to metal removal because of their high shear strengths. Hastelloy C276 Cross Pipe Fittings is used for Flue gas desulfurization system, Aramide plastics production, and Pickling baths. Hastelloy C276 Reducer Pipe Fittings is commonly used in Flue Gas Desulfurization (FGD) applications for scrubbers, dampers and ducts.

Grade 316 pipe bend also has given excellent service in potable water. Pitting and crevice corrosion may occur in waters with higher chloride content, and 2000 ppm is accepted as the upper limit. The higher molybdenum content of 316 make it significantly more corrosion resistant than grade 304.

Incoloy 825 fittings are known for their resistance to chloride stress-related corrosion cracking and pitting. We are a leading manufacturer and supplier of ASTM B366 Alloy 825 Elbow. The addition of titanium to the alloy is what stabilizes the alloy 825 tee against sensitization in the as-welded state. Thus, making these fittings resistant to intergranular attack even in temperature ranges that would normally make unstable conventional-use stainless steel grades sensitive.

Alloy 825 fittings are manufactured like other nickel-based alloys. This means that the material used to manufacture Incoloy 825 elbows is easily formed and welded by a variety of techniques. For example, according to ASTM B366, the list of forging or forming operations includes hammering, piercing, upsetting, rolling, extrusion, pressing, bending, and fusion welding. In addition to withstanding Incoloy 825 fittings for chemical and product analysis, specified fittings also need to meet chemical requirements. Typical applications for Incoloy 825 fittings include their applications in air pollution control, chemical and petrochemical, food processing, petroleum refining, ore processing, steel pickling and waste processing industries, nuclear industry, and offshore oil and gas production.

Inconel 600 and Inconel 601 are very common superalloys. Both alloys have good high temperature properties. Among them, Inconel 601 adds more chromium on the basis of Inconel 600, so the main difference between them is the difference in antioxidant properties.