304 stainless steel is the most common stainless steel. The steel contains both chromium (between 18% and 20%) and nickel (between 8% and 10.5%)[1] metals as the main non-iron constituents. It is an austenitic stainless steel.When it comes to uses, SS304 can be found in kitchen sinks and other appliances such as toasters and microwave ovens. SS304 is also used to make pressure vessels, wheel covers as well as for building facades.
INCONEL alloy 625 is designated as UNS N06625, Werkstoff Number 2.4856 and ISO NW6625 and is listed in NACE MR-01- 75.
Alloy 400 (UNS N04400) is a nickel-copper alloy with high strength (comparable to structural steel) and toughness.
Some of the typical applications of duplex steel grade 2205 are oil and gas exploration, processing equipment, transport, storage and chemical process, high chloride and marine environments, paper machines, liquor tanks, pulp, and paper digesters.
Like the other socket pipe fittings, it has a ladder shaped area, so to insert the pipe into the tee branches then welding together. It usually used for small diameter tubing systems.
The use of branch fittings instead of conventional fittings (buttweld tee, reinforcing pads and saddles) has the following advantages (example Weldolet):
Just 2 welds are needed, instead of 3 (less work and weld inspections) Accelerated installation time Less space is required, making the piping system design more flexible The flow is fully unrestricted, due to the funnel design
Weldolets are the most popular type of branch fittings, belong to the buttweld fittings family, and are available in a wide range of dimensions.
A Sockolet is similar to a Weldolet, with the difference that the branch pipe is connected to the run pipe, via the fitting, with a socket weld connection as per ASME B16.11. Likewise Weldolets, Sockolets are used to make a 90-degree pipe branch. Sockolets may be ¡°size on size¡± or ¡°reducing¡±.
Half Coupling is used for small bore branching from a vessel or large bore pipe. It can be threaded or socket type. It has a socket or thread end on only one side.
Usually, the structure of a pipe joining consists of the same or identical materials as the pipes it joins. Based on the amount of pressure the pipe is exposed to, they may be solid or fluid, and can even be permanent or temporary.
ASME B16.11 Threadolet is the most popular branch connection: the branch is made by welding the item to the outlet of the run pipe. The ends of a Threadolet are bevelled to facilitate the welding process, and for this reason. Threadolet belongs to the family of butt weld fittings.
Our ASTM A182 Threadolet are accessible to our valuable customers in different range of diameters (d), wall thicknesses (w) and sizes (nom. Pipe Size) in customized form (as per customer requirment or order) and also at quite affordable rates.
Stainless Steel Forged Screwed-Threaded Union Suppliers, ASME B16.5/ B16.9/ B16.11/ B16.36/ B16.25/ B16.49 Stainless Fittings, ASTM A182 Forged Screwed-Threaded Union, threaded pipe fittings & socket weld pipe fittings manufacturers
The 150 PSI union pipe fitting has three pieces and includes a threaded connection that can be screwed or unscrewed to connect or disconnect pipes more easily than couplings. It features NPT threads on both ends which create tighter seals than straight threads.
Pipe plugs are defined as cap end of fractional tubes used in a large number of industries. These pipe plugs are designed to insert into the end of tubing to dead-end the flow. Various materials are used to manufacture high quality tube plugs in a variety of end connections.
Our high quality standard pattern 150 lb rated stainless steel threaded pipe fittings are manufactured to the highest standards. All stainless steel pipe fittings are monitored by quality control personnel for strict compliance with applicable standards & specifications.
Steel tee is a T-shaped pipe fittings that has three branches, normally has two forms with Equal Tee and Reducing Tee (Tee reducer), both are used to divide (combine) the pipelines to adjust the flow rate and change the direction.
We are the largest shareholder of forged threaded bushings in custom sizes to customer requirements. We specialize in producing threaded bushing sizes to ASME B16.11. Threaded hex bushing sizes to B16.11 cover pressure-temperature ratings, dimensions, markings, tolerances and material requirements.
Outlet fittings are forged products with high strength and clear cost advantages over conventional pipe branching techniques.
Steel pipe elbow plays a key role in the pipe fittings, which frequently used in different application and available in various shapes and sizes. It connects two pipes with same or different nominal diameters, and to make the pipe turn to a certain direction of 45 degree, 90 degree or 180 degree.
The Flexseal HT PIPE couplings are characterized by several special features. They can be easily and quickly assembled without losing their sealing performance and reliability against the conventional design. The HT PIPE couplings are available in any size from 300 mm to 2100 mm.
A Pipe Coupling, used in piping or plumbing, is a very short length of pipe or tube with either socket or female pipe threads at one or both ends that allows two pipes or tubes of equal or different sizes to be joined together. Couplings are pipe fittings that help to extend or terminate pipe runs. These fittings are also used to change pipe size. It¡¯s also used to repair a broken or leaking pipe.
Couplings are pipe fittings that serve to prolong or stop pipeline operations. Such fittings also help to adjust the thickness of the tubing. It also helps to patch a pipe that is broken or leaking.
