steel pipe nipple manufacturers

For industrial purposes, in pipeline systems, we usually need to change the direction of transmission; regulate the flow of fluids (oil and gas, water, mud); open or close pipelines, etc. Therefore, to accomplish these activities, steel pipe fittings will be applied.

While it is a very useful metal, it is cost prohibitive in most applications. Monel 400 costs 5 to 10 times as much as regular nickel or copper.

Cooling units in many desalination plants and power plants use seawater to keep equipment cool, but salt water is a problem and can cause corrosion in pipes. This can be solved using ASTM B171 Copper Nickel Forged Fittings which are environmentally friendly and easy to assemble without any threaded or bolted connections and no corrosion in the pipe.

Nickel alloy pipe fittings are composed of alloys with nickel as the main element. There is complete solid solubility between nickel and copper. Its wide resolution range between iron, chromium and nickel enables many alloy combinations.

The alloy can be machined at satisfactory speeds with machine tools commonly used in the industry. Generally, cold drawn or cold drawn stress relief materials are recommended for the best machinability and smoothest finish.

Fittings are used to connect two or more lengths of pipe or to close pipe ends. Fittings can connect pipes in a straight line, change flow direction, increase or decrease flow, or close pipe ends to stop flow.

Heat treatment the ASTM A105 Fittings is not a mandatory requirement. Although there is an exception for flanges that have an ASTM A105 Fitting Pressure Rating above Class 300. These are flanges of special design, wherein both the design pressure or the design temperature are not known as well as for items over 4 inches NPS and above Class 300. Heat treatment is required, when methods such as normalizing, annealing, normalize and temper, normalize and quench and tempering must be applied.

Our range of Nickel Alloy Fittings, Nickel Alloy Fasteners, High Strength Fasteners includes Butt Weld Fittings, Socket Weld Fittings, Threaded Fittings, Flanges, Fasteners, Outlets, Pipes and Bars. The company successfully engages in supplying industrial accessories and hardware products in a variety of sizes, shapes and sizes to meet customer requirements.

Steel pipe fittings are made of carbon or alloy steel pipes, sheets, profiles, and have a shape that allows them to function (change the direction or rate of fluid) in a piping system. These accessories mainly include steel elbows (45 or 90 degree bends), tees, reducers (concentric or eccentric reducers), crosses, caps, pipe joints, flanges, gaskets, studs, etc.

Resistant to various corrosive media. Chromium content provides better resistance in oxidizing conditions than alloys 200 and 201, while high nickel provides good resistance in reducing conditions.

Monel 400 contains the same levels of nickel and copper as the natural nickel ore found.

Half Coupling is used for small bore branching from a vessel or large bore pipe. It can be threaded or socket type. It has a socket or thread end on only one side.

The Inconel 625 is highly resistant against corrosion and oxidations mediums in various environments.

The alloying element that makes steel ¡®stainless¡¯ is chromium; however it is the addition of nickel that enables stainless steel to become such a versatile alloy.

Per specifications like the ASTM A105, using methods such as subjecting the material to normalizing, annealing, tempering, or quenching can bring about a noticeable change in the mechanical properties of the ASTM A105 Reducer.

Alloy 400 is virtually immune to chloride stress corrosion cracking in typical environments. Generally, its corrosion resistance is good in reducing environment, but poor in oxidizing environment.

To make the structure and composition of stainless steel castings uniform, which is especially important for raw materials, because the casting temperature and cooling rate are not the same, resulting in inconsistent microstructure. With high temperatures, the atomic activity intensifies and the ¦Ò phase dissolves, and its chemical composition tends to be uniform. A uniform single-phase structure is obtained after cooling quickly .

A182-F11 belongs to the American standard pearlitic organization heat-resistant steel forgings

ASTM A105 fittings possess a minimum tensile strength of 485mpa with a minimum yield strength of 250mpa. These fitting can be elongated by 22% and possess a hardness of 137 to 187 HBW. Our company is an ASTM A105 Forged Fittings manufacturer in India who make use of top-of-the-line technology to produce the best components in the industry. These coupling can be half or fully coupled. The Full Coupling A105 is employed in connecting small bore pipes. It is utilized in connecting a pipe to another pipe or to a swage or nipple. A105 Half Coupling is utilized for smaller bore branching from a large pipe bore. These couplings can be threaded and welded. A105 Threaded Coupling is preferred in applications where stress on the system is less. We are exporter and manufacturer of Carbon Steel A105 grade for forged pipe fittings.

At elevated temperatures it offers resistance to oxidation, carburization, and sulfidation along with rupture and creep strength.

The 316 stainless steel receptacle is an integrally reinforced branch connector that is more secure and reliable than other traditional branch connectors. Easy to use, good performance, durable and other advantages, well received by customers.

A pipe cap, also known as a head, a plug, or a baffle, is a pipe fitting that is welded on the pipe end or installed on the external thread of the pipe end to cover the pipe. It is used to close the pipe, and the function is the same as the pipe plug.

Stainless Steel 316 is a molybdenum austenitic alloy that is highly resistant to corrosive and chloride environments. Typically, this grade of stainless steel is used in exhaust manifolds, heat exchangers, jet engines and many other applications.

Unions Fittings are similar to Couplings. Manufactured as per ASME B16.11, ANSI B16.9, BS 3799 Standards. Socket weld Union and Threaded Unions are available in stock. Alloy 20 Union, Carpenter 20 Union and Incoloy 20 Union is in ready stock with Siddhagiri Metals and Tubes.

90 degree elbow with female National Pipe Taper (NPT) threads for changing the direction of flow between two pipes. Our high quality standard Class 150 stainless steel threaded fittings are manufactured to the highest standards.

Alloy 600 is machinable in both hot and annealed conditions. Due to the large amount of heat generated when machining this alloy, high-speed steel, cast non-ferrous or carbide tools should be used.

ASTM A105 is an iron-carbon alloy with carbon content of 0.0218%~2.11%. Also called carbon steel.

The alloy exhibits excellent resistance to seawater and brine, making it well suited to marine applications.

The body of a pipe coupling is typically made of either the same or similar materials as that of the pipes it joins. They may be rigid or flexible depending on the amount of movement the pipe is subjected to and may also be permanent or removable.?

The B2 forged fitting is the cornerstone of a strong comic, and the composition of Hastelloy leverages it to have the necessary strength and quality standards to help it withstand a lot of stress for years to come.

ASTM A105 is also called carbon steel, refers to the carbon content of WC less than 2% iron carbon alloy.