Steel Pipe & Tube

In stainless steel the heat from weld sensitizes the base metal heat affected zone. Sensitization is the condition where ¡°chromium¡± which was previously in a state of solution gets out and forms chromium carbide (which is a solid state) near the grain boundaries.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

The stainless steel is placed through a checking process and cut at the edges in this stage. The stainless steel is pushed through and morphed into its required tubular size with a rolling machine.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

Steel tubes are lined up on a fabricator and cut to a required length before heading to the following process. The cleaning in this stage helps remove dirt from the pipes, and then once treated with heat, the rolled pipes and tubes are stripped of any stresses that can come up in the welding and formation process.

After heating is finished, the stainless steel pipes and tubing are taken through a pickling segment where they¡¯re straightened out, and scales are removed from its surface.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

The most commonly used stainless steel pipes in the water industry are 304 and 316 stainless steel. 304 stainless steel water pipe¡¯s tensile strength is 2 times that of ordinary steel pipe. The strength of the material determines whether the water pipe can be strong and durable, safe and reliable.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

All of our stainless steel tubes are made from grade 304 stainless steel, fully certified and sourced from accredited mills which we have worked with for over two decades. Chemical and mechanical certification is available on request.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

In determining what grade of stainless steel tubing to select many factors are taken into account. The main requirement for stainless steels is that they should be corrosion resistant for a specified application or environment.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

Stainless steels are not known for good electrical conductivity. And Stainless steels with high concentrations of chromium and nickel retain strength at high temperatures.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

Stainless steel is a versatile material comprised of a steel alloy and a small percentage of chromium ¡ª the addition of chromium adds to the material¡¯s corrosion resistance, a trait that earned stainless steel its name.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

Once you have the right stainless steel tubing installed in your application, you might start to think about what to do with it at the end of its useful life. Although the alloying elements that go into stainless steel make it difficult to recycle, rest assured that about 50% of all new stainless steel is fabricated from melted down steel scrap.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

Because stainless steel is also low-maintenance, oxidation resistant, and doesn¡¯t affect other metals it comes in contact with, it is frequently used in a large array of applications, especially in piping, tubing, and fittings manufacturing. Based on the end use of the pipe, stainless steel piping is broken down into several categories.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

Stainless steel and copper are generally both ideal for indoor and outdoor applications and both hold up well over time. Stainless steel, comprises of a variety of alloys with chromium content ranging from 12 to 30 per cent, which protects it as long as the localised concentration is in excess of 12 per cent.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

For tubing and piping applications, type 304 stainless steel is a common selection because it is highly chemical- and corrosion-resistant. However, type 304 stainless steel is not compatible with applications where temperatures fall between 800 and 1640 degrees Fahrenheit (F) because it is prone to carbide precipitation, a result of the material¡¯s .08 percent carbon content limit.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

When compared to other types of pipes, the pricing of SS 316 pipes is competitive. Check the quality of the pipes before purchasing them while comparing the 316 stainless steel pipe pricing list.

316 steel pipe is appropriate for applications that require corrosion resistance above other traits. Ferritic or martensitic types of steel (those made with the most chromium) are manufactured to be either heat-treated or annealed.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

Austenitic Stainless steels like 316 and 304(those with high chromium and nickel contents) offer even more resistance, and can be used under the same general conditions as ferritic and martensitic types.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

316 stainless steel pipe is made from either solid chromium or a chromium and nickel combination. Types of stainless steel pressure pipe include seamless and welded pipe, electric fusion welded pipe for high-pressure applications, large diameter welded pipe for corrosive or high-temperature applications, and seamless and welded ferritic and austenitic stainless steel pipe.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

For applications where stainless steel tubing or piping must come into contact with food and other sensitive products, sanitation is a high priority. Stainless steel sanitary tubing is used in such applications because it has high corrosion-resistance, doesn¡¯t tarnish, and is easy to keep clean.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

In applications such as cylinders, bearings, and other hollow formed parts, stainless steel mechanical tubing is typically used. Tubing can manipulated to have a variety of cross-sectional shapes, such as square and rectangular, in addition to the more traditional, round tubing cross-section. Typically, ASTMA 511 and A554 grades are employed for mechanical tubing applications.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

In highly-specific aircraft applications, chromium and nickel type stainless steel is used because of their heat and corrosion-resistance. Found in applications that require high-strength, stainless steel aircraft tubing can be work-hardened or welded, although work-hardened pieces shouldn¡¯t be used with some kinds of corrosive substances. Low-carbon types of stainless steel are a common choice for welded parts.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

Industry-leading welded sanitary tubing along with technical expertise and unmatched service before and after the sale are offered. We stock all standard sanitary tubing sizes ? ¨C 8 inch OD (12.7 ¨C 203.2 millimeter OD) in 20-foot (6.1-meter) lengths.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

?Stainless steel pipes are manufactured according to ASTM A312 standard. The material is available in grade SS316/316L and made in standard length of 6 meters long. Dual grade SS316/316L stainless steel pipes are known to deliver exceptional performance and are generally developed for meeting the market demands.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

SS316 stainless steel has more carbon than SS316L. Nickel and molybdenum are the main chemical ingredients which are used in manufacturing process of stainless steel SS316 pipes. With adding molybdenum in the producing process, it effectively improves alloy corrosion resistance, specifically in the environment that is highly exposed to crevice corrosion in chloride based environments.

Stainless steel round tubes, referred to interchangeably as stainless steel pipes, are used in a wide variety of commercial and domestic settings. Whether it¡¯s for an engineering, shop fitting or manufacturing project, or just a small requirement from a hobbyist, the tainless steel tubes in a variety of sizes.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

Both 316 and 316L stainless steel alloys are marine steels, but they do have some key differences. The composition of 316L has a lower proportion of carbon. To meet the requirements of 316L stainless steel, the carbon content cannot exceed 0.03%. This reduces the risk of carbon precipitation, making it a better choice for welding to ensure maximum corrosion resistance.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

Alloy 310 can be used for mild oxidation, nitridation, cementation and thermal cycling applications, but the maximum service temperature must be reduced. Alloy 310 can also be used in low temperature applications with low permeability and toughness down to -450oF (-268oC). When heated between 1202 ¨C 1742oF (650 ¨C 950oC), the alloy exhibits sigma phase precipitation. Solution annealing at 2012 ¨C 2102oF (1100 ¨C 1150oC) will restore some degree of toughness.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

316 stainless steel is a popular alloy that contains molybdenum. Unlike the most common stainless steel, 304 steel, it is more resistant to chlorides and other acids. This makes it ideal for outdoor applications in marine environments or applications that may be exposed to chlorides.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

Typical Applications 310/310S stainless steel pipes are used in fluidized bed burners, kilns, radiant tubes, tube hangers for petroleum refining and steam boilers, coal gasifier internals, lead tanks, thermowells, refractory anchors, combustion boilers and combustion chambers, retorts, muffle furnaces, annealing hoods, saggars, food processing equipment, cryogenic structures.

Like steel, 316 stainless steel is primarily composed of iron and carbon. However, stainless steel also contains at least 10.5% chromium, a metallic element that imparts a metal surface finish and excellent corrosion resistance. Stainless steel is ideal for long-term applications that will be exposed to elements, moisture and potentially corrosive chemicals. It is also ideal for sensitive industries such as food preparation and pharmaceuticals, as the risk of contamination is much lower.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

Grade 310/310S stainless steel is 25% chromium and 20% nickel, making it highly resistant to oxidation and corrosion. Grade 310S is a low carbon version that is less prone to embrittlement and sensitization in use.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”