steel rod A182 F2 bar

Nilo Alloy 36, W.Nr 1.3912, Invar 36® is a nickel-iron, low controlled expansion alloy that contains 36% nickel and possesses a rate of thermal expansion approximately one-tenth that of carbon steel.
Invar 36 Specifications: UNS K93600, W.Nr 1.3912

Common Trade Names: Nickel Alloy 36, Invar 36®, Nilo 6®, Pernifer 6®
Invar 36® is a nickel-iron, low expansion alloy that contains 36% nickel, Invar 36 has a low coefficient of expansion from cryogenic temperatures to about +500°F (260°C).
Invar 36 Tube OD:0.2-6mm, WT: 0.02-2mm

Nilo / Alloy K W.Nr.: 1.3981
UNS: K94610 ASTM F15
Fixed-expansion glass-encapsulated iron-nickel-cobalt alloys, Kovar alloys, have a linear thermal expansion coefficient similar to that of hard glass within a certain temperature range
For mating sealing with hard glass

ASTM A194 Class 2h bolts are carbon base steel heavy duty hex nuts. Sa194-2h material is a common high strength nut. This specification ASTM A194 Class 2h washers are typically used in conjunction with the following fastener standards – A193 Class B7, A325, A490.

Alloy Steel F5 Flanges are square-shaped and are instrumental in interfacing pipes of nominal bore size without welding and are reasonable for high pressure hydraulic frameworks. ASTM A182 F5 Lap Joint Flanges go by a range of names, including back up flange, loose hubbed flange, loose ring flange and van stone flange. ASTM A182 Gr F5 Blind Flanges are commonly used in petrochemical, pipe engineering, public services and water works.

Chromium-molybdenum alloy steel has strong crack resistance under high temperature and high pressure. Chromium molybdenum is also resistant to hydrogen attack and hot sulfide corrosion cracking.

Alloy steel pipes are used for high temperature and very low temperature service (low temperature) in the energy industry, or for very high pressure applications. ASTM A335 Alloy Steel Pipe is suitable for ASTM A234 WPx Series Butt Weld Fittings (WP5, WP9, WP91) and A182 Fx Forged Fittings and Flanges (A182 F5, F9, F11, F22, F91). All of these materials have similar chemical and mechanical properties and can be joined or welded.

ASTM A193 Grade B7 specification covers the requirements for high strength alloy steel bolting materials for high temperature or high pressure service and other special purpose applications. It is a standard specification that defines typical chemical composition, mechanical properties, hardness requirements, preferential heat treatment, product marking, certification, and other requirements for bolted connections used in pressure vessel service, valves, flanges, and fittings. ASTM A193 defines SI (metric) and inch-pound units.

Several ANSI/ ASME standards use materials that are forged or cast to produce Cast AS Blind Flanges.

ASTM A320 bolts are suitable for low temperature service down to -150¡ãF and have a minimum Charpy impact value of 20-ft-lbf at this temperature. ASTM A320 Hex Bolts must obtain the durability and service of high temperature or high pressure and corrosion resistant steel. ASTM A320 Stud Bolts are available in different sizes and patterns, our premium ASTM A320 Grade L7 AS Bolts are in high demand in the market due to their speculative properties and specifications.

Gold Steel P91 of A335 EFW Pipe is an austenitic compound whose elasticity and creep strength can be improved by cold working. These pipes are widely used in oil and gas, power plants, shipbuilding, heavy engineering and other industries. All products meet or exceed industry standards of API, ASTM, ASME, ANSI and other national and international standards.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.19
Material Alloy Steel ASTM A333 Grade 3, Grade 6,Grade 8,Grade 9
ASTM A335 P5,P9,P11,P12,P22,P91,P122

The rim has numerous holes drilled into it that enables the flanged to be attached to a bolted flange. This design is far better because of the structural valve.

We offer ASME SA335 Grade P22 Welded Pipe, ASTM A335 P22 Pipe is manufactured according to ASTM standards. Alloy steel A335 P22 ERW tube, Astm A335 P22 temperature extreme cold formed, made from steel strip drawn through a series of rolls.

In applications where higher working pressures are a prerequisite, the use of seamless pipes is justified. Although stronger than welded pipe, the cost is much higher. In addition, in welded products, there is a greater risk of intergranular corrosion in the heat-affected weld zone. The obvious difference between alloy steel welded pipe and seamless product is the transverse seam along the length of the pipe
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.19
Material Alloy Steel ASTM A333 Grade 3, Grade 6,Grade 8,Grade 9
ASTM A335 P5,P9,P11,P12,P22,P91,P128

Besides these elements the addition of trace amounts of both Manganese and silicon, other set of common alloying elements, provides the alloy steel threaded flanges with excellent deoxidizing capabilities.

Grade B7 is a heat treated chromium molybdenum low alloy steel with a minimum tensile strength requirement of 125 ksi (860 Mpa), a yield strength of 105 ksi (720 Mpa) and a maximum hardness of 35HRC. Boltport produces B7 headed and headless bolts from alloy steel AISI 4140 bar stock or forgings. A193 Grade B7 is the most commonly used bolting size, plus A194 Grade 2H nuts are used for bolting carbon steel pipe. A193 B7 bolts are available in metric sizes from M6 to M180 and imperial sizes from 1/4 to 7 inches in diameter.

The production of ASME SA182 F9 flanges will be done using alloys with lower carbon content. Reducing the carbon content in these alloys reduces the formation of carbide precipitates. This basically means that alloy steel F9 flanges will no longer be susceptible to intergranular corrosion in the heat affected weld zone.

It helps improve fatigue resistance. Many industries, including paper and pulp, chemical reprocessing, water pipelines, nuclear power plants, heat exchangers and others, use ASME sa182 f12 projects in a variety of applications. Our Premium Alloy Steel F12 Flanges are corrosion free, edge perfect, efficient, lightweight, frictionless work, easy to install, highly conductive and of great quality.

These pipe fittings of B366 N06601 B366 N08825 B366 N10276 B366 N08020 materials, are used in the chemical industry, as well as in pressure vessels.

WPHY 52 Fittings are recommended be heat treated by one or more of the following procedures: annealing (stress relieving), normalizing, normalizing and tempering, quenching and tempering.Made utilizing high-grade crude materials, these ASTM A860 WPHY Pipe Fittings are anti-corrosive and strong.

The alloy content of pipes that make up low alloy steel is less than 5%. High alloy steels, on the other hand, have an alloy content ranging from 5% to about 50%. Similar to most alloys, the working pressure capacity of alloy steel seamless pipe is about 20% higher than that of welded pipe.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.19
Material Alloy Steel ASTM A333 Grade 3, Grade 6,Grade 8,Grade 9
ASTM A335 P5,P9,P11,P12,P22,P91,P127

Pipe to ASTM A335 P11 can be cold drawn or hot rolled. Each tube shall be reheated for heat treatment – fully or isothermally annealed, normalized and tempered at a temperature not lower than 1200¡ãF (650¡ãC). Each pipe length shall be hydrostatically tested to ASTM A335 P11, along with dimensional inspection and visual inspection. Longitudinal or transverse tensile tests, flattening tests or bending tests are carried out for each heat.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.19
Material Alloy Steel ASTM A333 Grade 3, Grade 6,Grade 8,Grade 9
ASTM A335 P5,P9,P11,P12,P22,P91,P129

Nuts with a nominal size over 1 inch shall be a UNC Series Class 2B fit or an 8 UN Series Class 2B fit. High strength ASTM A194 grade 2H nuts are common in the market and are often replaced by ASTM A563 grade DH nuts due to the limited availability of DH nuts in certain diameters and finishes.

There are other different types of ASME SA 182 AS Pipe Flanges such as the weld neck flanges and socket weld flanges each specified for a particular role.

Hastelloy C276 ASTM Standard B575 Plate is a nickel-molybdenum-chromium superalloy with an enhancement of tungsten made to have superb deterioration resistance in a wide variety of extreme atmospheres.

ASTM A182 is the Standard Specification for Forged or Rolled Alloy Steel Pipe ASTM A182 F11 Flanges, Forged Fittings, and Valves and Parts. These alloy steel A182 grade F11 WNRF flanges are designed for high temperature applications.

ASTM A335 P11 is part of ASTM A335, Pipe shall be suitable for bending, flanging, and similar forming operations, as well as fusion welding. The steel shall meet the requirements of chemical composition, tensile properties and hardness. Each pipe shall be hydrostatically tested. In addition, each pipe shall be inspected in accordance with the practice required for non-destructive testing.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.45

Alloy steel pipe is an economical section steel. Widely used in the manufacture of structural and mechanical parts, such as oil drill pipes, automobile drive shafts, bicycle frames and steel scaffolding for construction. Making ring parts with alloy steel pipes can improve material utilization, simplify the manufacturing process, save materials and processing time, such as: filling bearing rings, jack sleeves, etc. At present, steel pipes have been widely used in manufacturing.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.25

ASTM A335 P22 pipe specifications include seamless “chrome molybdenum” alloy steel pipe and alloy steel pipe. Chromium is an important compound in stainless steel. Any steel with 12% or more chromium is considered stainless steel. Unrivaled chromium resists oxidation at high temperatures.

SA12 F11 Flange is made up of by using supreme raw material and they give excellent performance even in toughest environment. The weight chart of this is also available and based on this the product is manufactured.

We feel proud to introduce ourselves as the well-known manufacturers, exporters and suppliers of Alloy Steel F21 Flanges.

Our alloy steel pipes are available in different sizes, grades, gauges and thicknesses according to customer’s custom requirements. We also supply these alloy steel LSAW pipes to our valuable customers at fairly reasonable prices.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.19

ASTM A194 specification covers carbon, alloy and stainless steel nuts for high pressure and/or high temperature service. American National Standard Heavy Duty Hex Series (ANSI B 18.2.2) shall be used unless otherwise specified. Nuts no more than 1 inch in nominal size shall conform to UNC Series Class 2B.