steel round bar 2205 bar steel round S32205 bar

ASTM A240 Type 2205 Plate is a duplex stainless steel plate that is used extensively in various industries such as chemical processing, oil and gas exploration, and marine engineering. SA 240 GR 2205 Sheet is made from grade 2205 stainless steel, which is a combination of ferritic and austenitic steel.

Higher chromium, molybdenum and nitrogen content results in a Pitting Resistance Equivalent Number (PREN) > 40, providing superior pitting and crevice corrosion capabilities to austenitic and duplex stainless steels in virtually all corrosive media, and critical pitting temperature Above 50¡ãC .

It is widely used in offshore oil and gas exploration/production and in heat exchangers in petrochemical/chemical processing.

A789 UNS S31803 and UNS S32205 are two grades of duplex stainless steel that are widely used in various industrial applications. These Duplex S31803 Seamless Pipes are known for their excellent corrosion resistance, high strength, and good weldability. A789 is a specification that covers seamless and welded tubes made from duplex stainless steel.

ASME SA 479 UNS S32205 Fastener is a corrosion resistant and high strength super alloy that can be used in low temperature ranges up to 1300 degrees Fahrenheit.

The corrosion resistance comes from the addition of alloying material, mostly the chromium content. The ASTM A790 Pipes are resistant to pitting corrosion and crevice corrosion. The pipes could also be electric fusion welded.

Super Duplex UNS S32760 has high resistance to pitting, crevice corrosion and stress corrosion cracking. For optimum corrosion resistance, a pickled or machined surface finish is recommended.

Duplex 2205 stainless steel (ferritic and austenitic) is widely used in applications requiring good corrosion resistance and strength. UNS S31803 grade stainless steel was modified several times to form UNS S32205, which was approved in 1996. This grade offers higher corrosion resistance.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.60

The 2507 pipes could also be electric fusion welded. The Pipes Manufacturer comes under five different classes with each class having a special mechanical property setup. The electric resistant welded pipes are stronger and they could be used for extensive welding.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

S31803 has been supplemented by S32205 (F60) which has a higher minimum Ni Cr and Mo.

These grades are excellent for fixed service simple flange connections, but slightly less so when forming a complex metallic shape. Fortunately, the workability of duplex into complex and rounded structures is less of an issue in structural steel given the wide preference for simple mild steel in non corrosive applications.

Compared with ferritic stainless steel and austenitic stainless steel, duplex stainless steel pipe has good welding performance. It is neither like the welding heat affected zone of ferritic stainless steel, because of the grain coarsening, the plastic toughness is greatly reduced, nor like austenitic stainless steel, it is more sensitive to welding hot cracks.

Alloy 32750 is a super duplex stainless steel supplied in hot worked and solution annealed conditions.

UNS S31803/2205 is a dual-phase steel grade with a ferritic-austenitic microstructure. The alloy consists of approximately 40-50% ferrite in the annealed condition.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.45

This alloy resists chloride environments and sulfide stress corrosion. It is also roughly double the strength of standard austentic stainless steels.

The 2205 Duplex Stainless Pipe exhibits magnetic properties in certain environments.

UNS S31803 Bolt is a threaded fastener with external threads. Generally, like screws, alloy S31803 bolts tend to use a variety of head designs.

Preheating of UNS S32750 Super Duplex Fasteners is not necessary except to prevent condensation on cold metal.

Duplex 2205 nuts and nuts are widely used in applications requiring good corrosion resistance and strength in marine and harsh environmenuts.

Super Duplex 2507 is designed to handle highly corrosive conditions and where high strength is required. The high molybdenum, chromium and nitrogen content in Super Duplex 2507 helps the material withstand pitting and crevice corrosion.

ASTM A790 specified 2205 Stainless Steel Pipe ability to resist stress related corrosion cracking.

ASTM A240 Type 2507 Super Duplex Plates must comply with ASTM A240. It is a specification of chrome and chrome-nickel stainless steel plate. Super Duplex 2507 plates are used in general applications and containers.

It is also exceptionally resistance to chloride SCC. Flanges are supplied with pitting resistance equivalent that is assuring very good pitting corrosion resistance.

The structure of 2205 duplex stainless steel consists of a pool of austenite surrounded by a continuous ferrite phase. In the annealed condition, 2205 contains approximately 40-50% ferrite. 2205 is often referred to as the workhorse grade and is the most widely used grade in the duplex stainless steel family.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.66

Duplex 2205 fasteners are made from cost-effective, long-lasting and corrosion-resistant steel. The grade of steel used to make fasteners can be ferritic, austenitic or dual phase steel. Duplex materials have the strength qualities of ferritic steels and the corrosion-resistant qualities of austenitic steels.

ASTM A479 Super Duplex UNS S32750 F53 Heavy Hex Nuts are kept together by a combination of their threads’ friction (by means of slight elastic distortion), a small widening of the bolt, and solidity of the components to be held together.

Super Duplex 2507 has more than twice the strength of conventional austenitic stainless steels in the annealed condition.

Type: Seamless, Welded

WT: SCH5-SCH80S

The pressure capacities of the flanges can also be expressed in pressure numbers. The astm a182 f53 uns s32750 flange types come in pressure numbers ranging from PN6 through PN64.

Zeron 100?contains 25% chromium and 7% nickel and 3.6% molybdenum along with copper and tungsten additions. Zeron 100 has a 50¨C50 austenitic¨Cferritic structure. It also has greater resistance to chloride pitting, crevice corrosion and stress corrosion cracking than exhibited by the standard 300 series stainless steels.

Duplex 2507 is a super duplex stainless steel designed for applications which demand exceptional strength and corrosion resistance.

S32760 has very good resistance to localized corrosion and stress corrosion cracking and high mechanical strength.

The high oxidation resistance property of Grade 2205 is marred by its embrittlement above 300¡ãC. This embrittlement can be modified by a full solution annealing treatment. This grade performs well at temperatures below 300¡ãC.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

The flange is second most used joining method after selding. Flanges are used when joints need dismantling. It provides flexibility for maintenance. Flange connects the pipe with various equipment and valves. Breakup flanges are added in the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrdlated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls are required in the selection and application of all there elements to attain a joint, which has acceptable leak tightness.
A flange is a protruded ridge, lip or rim, either external or internal, that serves to increase strength (as the flange of an iron beam such as an I-beam or a T-beam); for easy attachment/transfer of contact force with another object (as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera); or for stabilizing and guiding the movements of a machine or its parts (as the inside flange of a rail car or tram wheel, which keep the wheels from running off the rails). The term “flange” is also used for a kind of tool used to form flanges.

The formation of ASTM A479 duplex steel UNS S32205 tie rod consists of a pool of austenite surrounded by continuous ferrite phases. ASME SA 479 Duplex Steel UNS S31803 Tie Rods are hot worked in the temperature range of 1750¡ãF to 2100¡ãF. This is designed to reduce the depth used in fabrication, thereby reducing the weight of precise significance for items such as pressure vessels, structural functions, etc. As ASTM A479 dual phase steel for bridges, storage tanks, etc. UNS S32205 rebar has approximately twice the superior performance of SS 304 .