Super Duplex S32750 Flange ASTM A182 SUPER DUPLEX BLIND FLANGES

ASTM A240 Type 2205 Plate is a duplex stainless steel plate that is used extensively in various industries such as chemical processing, oil and gas exploration, and marine engineering. SA 240 GR 2205 Sheet is made from grade 2205 stainless steel, which is a combination of ferritic and austenitic steel.

A789 UNS S31803 and UNS S32205 are two grades of duplex stainless steel that are widely used in various industrial applications. These Duplex S31803 Seamless Pipes are known for their excellent corrosion resistance, high strength, and good weldability. A789 is a specification that covers seamless and welded tubes made from duplex stainless steel.

Higher chromium, molybdenum and nitrogen content results in a Pitting Resistance Equivalent Number (PREN) > 40, providing superior pitting and crevice corrosion capabilities to austenitic and duplex stainless steels in virtually all corrosive media, and critical pitting temperature Above 50¡ãC .

It is widely used in offshore oil and gas exploration/production and in heat exchangers in petrochemical/chemical processing.

Duplex stainless steel has an array of various benefits such as:
Strength:Duplex stainless steels have approximately double the strength of regular austenitic or ferritic stainless steels.
Toughness and ductility:Duplex stainless steels exceed the toughness and ductility of ferritic grades although they are not as touch as austenitic grades.
Corrosion resistance:As with all stainless steels, corrosion resistance depends mostly on the composition of the stainless steel, with chromium, molybdenum and nitrogen content being the most important. Duplex stainless steels are extremely corrosion resistant and even in chloride and sulphide environments, duplex stainless steels exhibit very high resistance to stress corrosion cracking (SCC). SCC is a type of corrosion that takes place when a particular set of factors are present: Tensile stress, corrosive environment and a sufficiently high temperature.
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

The yield strength of duplex stainless steel is twice that of austenitic stainless steel. This feature allows designers to reduce weight when designing products, making this alloy more cost-effective than 316, 317L.

Stainless Steel Duplex SAF 2205 Hex Bolts are used in machinery and construction and can be used with nuts or threaded holes. Since they can be tightened with a wrench, fully threaded hex bolts are specially designed to work more efficiently. Additionally, 2205 hex bolts are stronger than standard stainless steel, meaning they can be used for jobs that require high workloads and good corrosion resistance.

The yield strength of this alloy is about 570 MPa. In addition to strength, A240 S32750 Super Duplex Plate is an alloy that provides the best resistance to crevice and pitting corrosion.

The granular structure of duplex is a ferrite-austenite hybrid with a superior strength to weight ratio in comparison to 304 or 316. It balances the weldability of an austenitic with a pure ferritic and retains decent mechanical toughness in applications with exposure to colder ambient temperatures.

ASTM A790 UNS S32205 es un tipo de acero duplex que es una mezcla de diferentes elementos. La composicion del acero SA 790 UNS S32205 es cromo, molibdeno y nitrogeno.

Super Duplex Pipe Suppliersis known to have better pressure erosion, splitting obstruction and mechanical properties than some other kind of steel.

Pipes that are used in the conveyance of such media need to be durable on account of the stress caused by the flow. Hence, many suppliers recommend using the Duplex Stainless Steel Pipe for the qualities they offer.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

Light gauges of 2507 material can often be used to achieve the same design strength of thicker nickel alloys. Duplex 2507 plate is suitable for applications requiring excellent strength and corrosion resistance. It contains 25% chromium, 4% molybdenum and 7% nickel.

2205 is the most widely used duplex (ferritic/austenitic) stainless steel grade. It finds applications due to both excellent corrosion resistance and high strength.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

Super Duplex is used in gas and oil industry, on offshore platforms, chemical processing equipment pressure vessels and boilers, in heat exchangers.

The different face types have their own advantages in piping applications.

The 21% chromium content is the key to extreme corrosion resistance and strength of the SA 182 f51 flanges. HT PIPE is a leading supplier and manufacturer of the flanges in various scales, shapes and types.

They have a design that allows for the pipes to pass through the flange and locate the correct point for connection. The ASTM A182 grade F53 WNRF Flange has a welded neck raised face.

Austenitic has a low strength and a low resistance to stress corrosion cracking, while ferritic also has a low strength, poor weldability and poor low temperature toughness. Producing a chemical composition that combines austenitic and ferritic results in a metal that has a higher strength, good weldability, good toughness and resistance to stress corrosion cracking.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

The high chromium, molybdenum, and nickel levels provide excellent resistance to pitting, crevice, and general corrosion.

The flange is second most used joining method after selding. Flanges are used when joints need dismantling. It provides flexibility for maintenance. Flange connects the pipe with various equipment and valves. Breakup flanges are added in the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrdlated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls are required in the selection and application of all there elements to attain a joint, which has acceptable leak tightness.
A flange is a protruded ridge, lip or rim, either external or internal, that serves to increase strength (as the flange of an iron beam such as an I-beam or a T-beam); for easy attachment/transfer of contact force with another object (as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera); or for stabilizing and guiding the movements of a machine or its parts (as the inside flange of a rail car or tram wheel, which keep the wheels from running off the rails). The term “flange” is also used for a kind of tool used to form flanges.

ASTM A815 GR S32750 tee is used to merge or split fluid streams.

La tuberia SA 790 UNS S32205 se utiliza para aplicaciones que funcionan en ambientes ligeramente corrosivos, de presion y temperatura ligeramente alta. Aplicacion de tuberia sin costura Duplex S32205 UNS en sistemas de purificacion de agua y manejo de aguas residuales y alta precision.

The ASTM A790 Duplex 2205 Pipe produced under this specification are intended to be used for those applications where corrosion resistance is a primary concern.

UNS S32205 dual-phase steel round bar has excellent resistance to chloride stress corrosion cracking, high strength, can withstand brackish water or salt water impact, and high surface toughness.

Duplex 2205 flanges are made from an austenitic-ferritic stainless steel, which was designed to deliver higher strength and corrosion resistance than 300 series stainless steels.

UNS S32750 Bolts are used for the assembly of two unthreaded components, with the assistance of a nut. UNS S32750 Bolts are known to have superior properties such as high tensile and yield strength.

Duplex 2205 stainless steels are called “duplex” because they have a two-phase microstructure consisting of ferritic and austenitic stainless steel grains. When duplex stainless steel melts, it solidifies from the liquid phase to a fully ferritic structure. As the material cools to room temperature, about half of the ferrite grains transform into austenite grains (“islands”). The result is a microstructure of approximately 50% austenite and 50% ferrite.

It is listed in Material Group 2.8 according to ASME B16.5 and ASME B16.47.

The duplex structure results in improved stress-corrosion cracking resistance, compared with the austenitic stainless steels, and improved toughness and ductility, compared with the ferritic stainless steels.

Stub ends are used with lap flanges. Metline is an ISO certified, PED approved duplex 2205 stub end manufacturer and supplier with a manufacturing base in India. We can supply both long and short ends (collars) with test certificate according to EN10204 3.1.

The material is also resistant to chloride stress corrosion cracking, to erosion corrosion, to corrosion fatigue, to general corrosion in acids. This alloy has good weldability and very high mechanical strength.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

The corrosion resistance comes from the addition of alloying material, mostly the chromium content. The ASTM A790 Pipes are resistant to pitting corrosion and crevice corrosion.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”