Super Duplex S32750 Flange Super Duplex Steel S32750 Long Weld Neck Flanges

It is widely used in offshore oil and gas exploration/production and in heat exchangers in petrochemical/chemical processing.

A789 UNS S31803 and UNS S32205 are two grades of duplex stainless steel that are widely used in various industrial applications. These Duplex S31803 Seamless Pipes are known for their excellent corrosion resistance, high strength, and good weldability. A789 is a specification that covers seamless and welded tubes made from duplex stainless steel.

ASTM A240 Type 2205 Plate is a duplex stainless steel plate that is used extensively in various industries such as chemical processing, oil and gas exploration, and marine engineering. SA 240 GR 2205 Sheet is made from grade 2205 stainless steel, which is a combination of ferritic and austenitic steel.

Higher chromium, molybdenum and nitrogen content results in a Pitting Resistance Equivalent Number (PREN) > 40, providing superior pitting and crevice corrosion capabilities to austenitic and duplex stainless steels in virtually all corrosive media, and critical pitting temperature Above 50¡ãC .

It is listed in Material Group 2.8 according to ASME B16.5 and ASME B16.47.

Combining many of the beneficial properties of ferritic and austenitic steels, 2205 is the most widely used duplex grade. Its high chromium and molybdenum conutenut gives stainless steel excellenut corrosion resistance.

The flange is second most used joining method after selding. Flanges are used when joints need dismantling. It provides flexibility for maintenance. Flange connects the pipe with various equipment and valves. Breakup flanges are added in the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrdlated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls are required in the selection and application of all there elements to attain a joint, which has acceptable leak tightness.
A flange is a protruded ridge, lip or rim, either external or internal, that serves to increase strength (as the flange of an iron beam such as an I-beam or a T-beam); for easy attachment/transfer of contact force with another object (as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera); or for stabilizing and guiding the movements of a machine or its parts (as the inside flange of a rail car or tram wheel, which keep the wheels from running off the rails). The term “flange” is also used for a kind of tool used to form flanges.

Heat and product analysis is to be performed on the SA 789 Alloy 2205 Pipe Material.

Duplex 2205 stainless steel (ferritic and austenitic) is widely used in applications requiring good corrosion resistance and strength. Grade S31803 stainless steel was modified several times to form UNS S32205, which was recognized in 1996.

Our duplex steel UNS S31803 fasteners are available in different grades such as industrial washers, industrial screws, stainless steel washers, stainless steel screws and more.

The Super Duplex 2507 Pipe is made with 25% of chromium, 4% of molybdenum, and 7% of nickel in their composition. As a result, these pipes possess superior corrosion and erosion resistance in various stress-induced environments.

The corrosion resistance properties of Duplex 2205 Pipe is much better as compared to alloy grade 316.

The yield strength of 2205 is about twice that of austenitic stainless steel. This allows designers to reduce weight and make the alloy more cost-competitive compared to 316L or 317L.

ASTM A182 UNS S32750 Flanges is the most common super duplex grade that has an enhanced pitting and crevice corrosion resistance compared with the ordinary austenitic or duplex types.

The Duplex Steel Pipe gets its name from the dual nature present in the microstructure of the alloy. Duplex Stainless Steel Seamless Pipe have good mechanical characteristics and can be used in an as welded condition. Considered to be superior in comparison to austenitic alloys ASTM A312 TP304 or ASTM A312 TP316, the Seamless Duplex Pipe offers much better resistance to corrosion.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

The advantage of the dual-phase structure is that it combines the stress corrosion cracking resistance and high strength of ferritic alloys with the ease of manufacture and corrosion resistance of austenitic stainless steel alloys.

Preheating of UNS S32750 Super Duplex Fasteners is not necessary except to prevent condensation on cold metal.

Duplex is often found in desalination and pressure vessel equipment located in port cities.

Some steels also contain the alloy elements such as Mo, Cu, Nb, Ti and N, etc. Compared with ferritic stainless, duplex stainless steel has higher plasticity, ductility and better intergranular corrosion resistance and weldability.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

2205 duplex pipe is not recommended to be used at a temperature above 572¡ãF. Due to the presence of higher chromium, molybdenum, and nitrogen contents, 2205 duplex stainless steel tubes demonstrates superior corrosion resistant properties in comparison to the more conventionally used austenitic stainless steel grades 316 and 316L in most environments.

Duplex 2205 Tube may at times exhibit magnetic behavior because the microstructure of its alloy contains about 50% ferrite.

The granular structure of duplex is a ferrite-austenite hybrid with a superior strength to weight ratio in comparison to 304 or 316. It balances the weldability of an austenitic with a pure ferritic and retains decent mechanical toughness in applications with exposure to colder ambient temperatures.

Duplex¡¯s premium mechanical and chemical properties are slightly offset by its difficulty in formability.

Duplex stainless steel, alloy 2205 was designed as comprising 22% chromium, 3% molybdenum, and 5-6% nickel nitrogen. Alloy 2205 combines the desirable aspect of properties of both austenitic and ferritic grades.

As experts in the field of fasteners, we recognize that this alloy can be used in a variety of applications including heat exchangers, piping, pressure vessels, tanks, fans, pulp and paper equipment, oilfield equipment and press rolls. At HT PIPE you can find Duplex Premium Gaskets in high quality.

F51 duplex stainless steel is especially suitable for use in the temperature range of -50¡ãF/+600¡ãF, and can also be used for lower temperatures under strictly limited conditions (especially for welded structures).

UNS S31803/2205 is a dual-phase steel grade with a ferritic-austenitic microstructure. The alloy consists of approximately 40-50% ferrite in the annealed condition.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.45

The temperature in heat exchange is usually increased because they work according to the principle of heat transfer. While A789 tubing can hold its own at high temperatures, it is not recommended for use in temperatures above 600F. Duplex 2205 Tube may become brittle and rot at temperatures above 600F.

2205 duplex stainless tubing material, which is why it is referred to as a self-repairing layer.

Since the material is also resistant to acids and chlorine compounds, it could see its application in marine environments, especially in saltwater containing chlorine compounds. The ferritic portion of the duplex structure of Super Duplex 2507 round bar alloy makes it resistant to stress corrosion cracking in warm chloride-containing environments.

Duplex 2205 bolts (EN 1.4462 ) are made of austenitic-ferritic stainless steel and are designed to provide higher strength and corrosion resistance than 300 series stainless steels. It helps users avoid stress corrosion cracking common to 316 and 317. Duplex 2205 bolts combine the stress corrosion cracking resistance and high strength of ferritic alloys with austenitic fabrication capabilities.

Duplex 2205 stainless steel (ferritic and austenitic) is widely used in applications requiring good corrosion resistance and strength. Grade S31803 stainless steel was modified several times, resulting in UNS S32205, which was recognized in 1996. This grade provides higher corrosion resistance If we do not stock Duplex 2205 fasteners (imperial or metric), we can manufacture these to your specifications.

Super Duplex Stainless steels, which combine high strength and excellent corrosion resistance in many environments, have found applications in chemical and process industries.