Super Duplex S32750 Flange used for application in Desalination Equipment

A789 UNS S31803 and UNS S32205 are two grades of duplex stainless steel that are widely used in various industrial applications. These Duplex S31803 Seamless Pipes are known for their excellent corrosion resistance, high strength, and good weldability. A789 is a specification that covers seamless and welded tubes made from duplex stainless steel.

Higher chromium, molybdenum and nitrogen content results in a Pitting Resistance Equivalent Number (PREN) > 40, providing superior pitting and crevice corrosion capabilities to austenitic and duplex stainless steels in virtually all corrosive media, and critical pitting temperature Above 50¡ãC .

It is widely used in offshore oil and gas exploration/production and in heat exchangers in petrochemical/chemical processing.

ASTM A240 Type 2205 Plate is a duplex stainless steel plate that is used extensively in various industries such as chemical processing, oil and gas exploration, and marine engineering. SA 240 GR 2205 Sheet is made from grade 2205 stainless steel, which is a combination of ferritic and austenitic steel.

Super Duplex S32760 Bar proves to be an excellent replacement for austenitic grades in marine environments. Super Duplex S32760 round bar (ASTM A276/ ASTM A479) exhibits good heat resistance up to 300¡ã.

It is a super duplex alloy, so heat resistance is also what Super Duplex 2507 rods are capable of. River or sea water often contains highly corrosive chemicals containing sulfur or chloride ions, and materials such as the 2507 Super Duplex Round Bar can withstand these chemicals.

The chemical composition specifications stated in the norm must be met by the steel Super Duplex Plate. The content, in this case Thick Duplex Alloy 2507 Cold Rolled Sheet, must also meet the required mechanical properties.

Duplex UNS S32205 fasteners are widely used in construction and other industrial applications. We offer these types of fasteners in differenut thicknesses and tolerance limits for a variety of industrial applications.

ASTM A240 UNS S32750 sheet is a type of steel known as super duplex steel.

2507 (UNS S32750) is a super duplex stainless steel designed for applications requiring excellent strength and corrosion resistance.

ASTM A182 F51 equates to UNS S31803. This was the original caption for a 22% Cr duplex stainless steel.

2507 is a super-duplex (austenitic-ferritic) stainless steel for service in highly corrosive conditions.

The flange is second most used joining method after selding. Flanges are used when joints need dismantling. It provides flexibility for maintenance. Flange connects the pipe with various equipment and valves. Breakup flanges are added in the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrdlated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls are required in the selection and application of all there elements to attain a joint, which has acceptable leak tightness.
A flange is a protruded ridge, lip or rim, either external or internal, that serves to increase strength (as the flange of an iron beam such as an I-beam or a T-beam); for easy attachment/transfer of contact force with another object (as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera); or for stabilizing and guiding the movements of a machine or its parts (as the inside flange of a rail car or tram wheel, which keep the wheels from running off the rails). The term “flange” is also used for a kind of tool used to form flanges.

The SA 182-F51 S31803 comes under ASME B16.47, B16.48 and B16.5 standards with sizes ranging from 1/8 NB to 48NB.

A high molybdenum superaustenitic with outstanding resistance to chloride pitting, crevice corrosion and stress corrosion cracking. Suitable for use in pulp mill bleach plants, seawater heat exchangers and chemical process equipment.

Duplex steels have higher toughness and better weldability. This is how alloy steel is used for industrially available pressure vessels.

2205 has good solderability. The motivation for welding dual-phase steels is to maintain the corrosion resistance, toughness and strength of the base metal in the weld metal and heat affected zone.

Duplex 2205 flanges offer good sulfide corrosion resistance, as well as chloride pitting and crevice corrosion resistant superior to 317L.

UNS S32750 Bolts are used for the assembly of two unthreaded components, with the assistance of a nut. UNS S32750 Bolts are known to have superior properties such as high tensile and yield strength.

ASTM A479 Duplex Steel UNS S32205 Nuts have good weldability and can be welded by most common welding methods such as shielded metal arc welding, gas tungsten arc welding, plasma arc welding and submerged arc welding. Buy Duplex Stainless Steel Nuts from us at leading market prices.

Astm A479 Super Duplex Steel UNS S32760 Hex Bolts have a high PREN value, the rate of pitting is lower, despite the use of these fasteners in highly corrosive environments such as oil wells and pipelines transporting soured oils, sulfide ores processing, kraft paper production plants, methionine and lysine factories, as well as the photographic industry.

Duplex stainless steel is a very useful metal that is used the world over. It gets its name from the fact that it consists of two different grades of metal. Essentially, Duplex is a Fe-Ni-Cr alloy that has a two-phase ferritic-austenitic stainless-steel microstructure when it is at room temperature.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

Compared to 317L stainless steel, duplex steel has excellent resistance to chloride pitting and crevice corrosion. The alloy has excellent corrosion resistance to seawater and most concentrations of sulfuric acid. In addition, it is resistant to sulfide stress corrosion cracking (sour gas environments)

2507 has Good general corrosion resistance, Suggested for applications up to 600¡ã F, and Low rate of thermal expansion.

Grade 2205 is the most widely used duplex stainless steel grade. Fittings of this grade finds applications due to both their excellent corrosion resistance as well as their high strength.

For many applications where 300 series stainless steel is susceptible to chloride stress corrosion cracking, 2205 duplex stainless steel is a cost-effective solution. Stress corrosion cracking occurs when stainless steel is subjected to tensile stress while in contact with solutions containing chlorides. Elevated temperatures also increase the susceptibility of stainless steel to stress corrosion cracking.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.52

Seamless pipe is not as strong as Duplex SS 2205 welded pipe, but is very dimensionally accurate. Dimensional accuracy is useful in highly sensitive applications where measurement and calculation accuracy is required.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.40

UNS S2750 Super Duplex Fasteners have good weldability and can be joined to itself or other materials by shielded metal arc welding, gas tungsten arc welding, plasma arc welding, flux cored wire or submerged arc welding.

Astm A790 Uns S31803 grade pipes and tubes can be cold-rolled to give them enhanced properties and good resistances in different systems.

Zeron 100 Threaded Rod are available in hot forged,cold forged and bar stock machined conditions depending upon the order quantity.SA 182 F55 is a forging grade of Alloy 32760 or UNS 32760 which is highly resistant to crevice corrosion and pitting alloy for variety of corrsives. It is 22% chromium duplex stainless steel.

Duplex¡¯s premium mechanical and chemical properties are slightly offset by its difficulty in formability.

Known for its high impact strength, UNS S32760 exhibits no ductile-brittle transition, but only a slight decrease in impact energy with decreasing temperature.

ASTM A789 A789M Covers Grades of nominal wall thickness, stainless steel tubing for services requiring general corrosion resistance, with particular emphasis on resistance to stress corrosion cracking. These steels are susceptible to embrittlement if used for prolonged periods at elevated temperatures.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

Super Duplex UNS S32760 Round Rod has many properties and properties due to the elements present in the chemical composition. Due to these characteristics and properties, these super duplex UNS S32760 round bars are used in a large number of industrial applications.