Super Duplex S32750 Flange used in Oil-gas industry equipment and Pulp and Paper Mill Equipment

ASTM A240 Type 2205 Plate is a duplex stainless steel plate that is used extensively in various industries such as chemical processing, oil and gas exploration, and marine engineering. SA 240 GR 2205 Sheet is made from grade 2205 stainless steel, which is a combination of ferritic and austenitic steel.

It is widely used in offshore oil and gas exploration/production and in heat exchangers in petrochemical/chemical processing.

A789 UNS S31803 and UNS S32205 are two grades of duplex stainless steel that are widely used in various industrial applications. These Duplex S31803 Seamless Pipes are known for their excellent corrosion resistance, high strength, and good weldability. A789 is a specification that covers seamless and welded tubes made from duplex stainless steel.

Higher chromium, molybdenum and nitrogen content results in a Pitting Resistance Equivalent Number (PREN) > 40, providing superior pitting and crevice corrosion capabilities to austenitic and duplex stainless steels in virtually all corrosive media, and critical pitting temperature Above 50¡ãC .

ASTM A479 Duplex Stainless Steel 1.4462 Punched Washers has resistance to SCC that is of prominence in a lot of applications counting hot water tanks, brewing tanks, desalination plant and process plant. Accordingly, ASTM A479 Duplex Stainless Steel UNS S31803 Lock Washers shows properties of both ferritic and austenitic alloys. Microstructures of ASME SA 479 Duplex Steel UNS S32205 Flat Washers include a combination of ferrite and austenite stages. ASTM A479 Duplex Steel UNS S31803 Washershas outstanding general corrosion resistance in a widespread range of corrosive chemicals containing industrial and seawater acids.

2507 (UNS S32750) is a super duplex stainless steel designed for applications requiring excellent strength and corrosion resistance.

Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Material: Duplex Steel ASTM A789 S31803,S32205,S32750, S32760
ASTM A790 S31803,S32205,S32750, S32760

Super Duplex UNS S32760 Reducing Flanges have a strengthened microstructure, a result of added Nitrogen, allowing fabrication of thin and low-weight flanges that are easy on the pocket.

Compared with ferrite, it has higher plasticity and toughness, no room temperature brittleness, significantly improved intergranular corrosion resistance and welding performance, and maintained 475 ¡æ brittleness, high thermal conductivity and Superplasticity of ferritic stainless steel. Compared with austenitic stainless steel, its yield strength is significantly improved, and its resistance to intergranular corrosion, stress corrosion, corrosion fatigue and abrasion is significantly improved.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

In general, duplex steel S31803 plate can be used as a replacement for the rather expensive stainless steel alloy grade 904L, as 2205 SS plate has similar properties but is less expensive in composition.

La tuberia ERW se usa en aplicaciones que requieren una soldadura extensa para la instalacion. Los usos de la tuberia duplex ASTM A790 UNS S32205 no se limitan a aplicaciones industriales, tambien se pueden ver en aplicaciones domesticas de bajo costo.

Duplex UNS S32205 fasteners are widely used in construction and other industrial applications. We offer these types of fasteners in differenut thicknesses and tolerance limits for a variety of industrial applications.

The advantages of duplex steels include: good weldability and machinability, high resistance to corrosion fatigue, resistance to stress corrosion cracking (especially chloride stress corrosion cracking), erosion and high energy absorption.

2205 duplex pipe is not recommended to be used at a temperature above 572¡ãF. Due to the presence of higher chromium, molybdenum, and nitrogen contents, 2205 duplex stainless steel tubes demonstrates superior corrosion resistant properties in comparison to the more conventionally used austenitic stainless steel grades 316 and 316L in most environments.

The flange is second most used joining method after selding. Flanges are used when joints need dismantling. It provides flexibility for maintenance. Flange connects the pipe with various equipment and valves. Breakup flanges are added in the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrdlated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls are required in the selection and application of all there elements to attain a joint, which has acceptable leak tightness.
A flange is a protruded ridge, lip or rim, either external or internal, that serves to increase strength (as the flange of an iron beam such as an I-beam or a T-beam); for easy attachment/transfer of contact force with another object (as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera); or for stabilizing and guiding the movements of a machine or its parts (as the inside flange of a rail car or tram wheel, which keep the wheels from running off the rails). The term “flange” is also used for a kind of tool used to form flanges.

Super Duplex Steel UNS S32760 are dual phase austenitic-ferritic duplex fasteners manufactured from alloy containing chromium, nickel and molybdenum with restricted carbon content and minimum PREN42. Zeron washers have high strength, resistance to pitting, stress corrosion cracking, erosion and corrosion fatigue, crevice corrosion resistance.

ASTM A815 specification covers two general classes, WP and CR, of wrought ferritic, ferritic/austenitic, and martensitic stainless steel fittings of seamless and welded construction. Class WP fittings are subdivided into four subclasses: Classes WP-S, WP-W, WP-WX, and WP-WU. The material for fittings shall consist of forgings, bars, plates, or seamless or welded tubular products.
Teel Industry has grown in the past few decades and there are a variety of products available in the market. ASTM A815 UNS S32750 Pipe Fittings are one of those products and are available in various sizes, shapes, and dimensions. ASTM A815 UNS S32760 Pipe Fittings are designed to be resistant to corrosion and are said to have perfect weldability. These Super Duplex S32750 Buttweld Fittings are resistant to erosion corrosion and fatigue. They have a mixed microstructure of 50% austenitic and 50% ferrite.

S31803 Duplex Steel is a 22% chromium duplex (austenitic/ferritic) steel with moderate to good strength and good general corrosion/stress corrosion/cracking resistance.

Duplex 2507 possesses excellent mechanical properties. Often a light gauge of 2507 material can be used to achieve the same design strength of a thicker nickel alloy.

UNS S32205 Hex Bolts (also known as S31803) are made of high grade duplex 2205 stainless steel. Because this material is composed of at least 22% chromium, 6% nickel, and 3% molybdenum, it can withstand some of the harsh environmental conditions that other metals cannot, such as corrosion, cracking, erosion, pitting, and more. Stainless Duplex 2205 Hex Bolts also provide twice the mechanical strength compared to standard stainless steel.

2507 (UNS S32750) is a super duplex stainless steel designed for applications which require exceptional strength and corrosion resistance. 2507 is a 25% chromium, 4% molybdenum, and 7% nickel alloy resulting in excellent resistance to chloride pitting and crevice corrosion attack.

Duplex plates have a two-phase or two-phase microstructure. The microstructure of the duplex steel S32205 foil consists of equal proportions of ferrite and austenite.

The 2205 was developed to provide excellent machinability. Control of composition and inclusion type improves chip formation and reduces tool wear, resulting in higher machining efficiency and lower tool costs.

It is listed in Material Group 2.8 according to ASME B16.5 and ASME B16.47.

It reaches the phase balance of austenite and ferrite in roughly same volume fraction.

2507 Super Duplex Stainless Steel was designed for demanding applications which require exceptional strength and corrosion resistance, such as chemical process, petrochemical, and seawater equipment.

The Duplex Pipes are used in high temperature applications along with the Duplex stainless steel tube as well. There are different shapes and sizes of these pipes.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

Due to the alloy’s very high mechanical strength, dual-phase fastener manufacturers can reduce the weight of their designs by thinning the cross-section of the final product, proving a cost-saving alternative to other grades of stainless steel.

Since the material is also resistant to acids and chlorine compounds, it could see its application in marine environments, especially in saltwater containing chlorine compounds. The ferritic portion of the duplex structure of Super Duplex 2507 round bar alloy makes it resistant to stress corrosion cracking in warm chloride-containing environments.

Duplex 2205 fasteners have high toughness and hardness while also possessing high levels of tensile strength, all as a result of the chromium present in them. However, it can be concluded that dual phase steel fasteners are undeniable; neither deformed nor damaged. This anomaly is much less likely to happen. 2205 Duplex Fasteners consume delicate structures made from ferritic and austenitic stainless steels that are considered part of an alloy, and the end result provides excellent mechanical properties in duplex fasteners.

Super Duplex UNS S32750 /F53 Flanges are made from a super duplex stainless steel grade that has 24% chromium, 3% molybdenum, 6% nickel and carbon, manganese, silicon, sulfur, phosphorus, nitrogen and iron in the composition.

Duplex 2205 bolts (EN 1.4462 ) are made of austenitic-ferritic stainless steel and are designed to provide higher strength and corrosion resistance than 300 series stainless steels. It helps users avoid stress corrosion cracking common to 316 and 317. Duplex 2205 bolts combine the stress corrosion cracking resistance and high strength of ferritic alloys with austenitic fabrication capabilities.

It is a tee fitting with two outlets at a 90¡ã junction to the main line.

Its impact strength or hardness properties inherited from the ferritic side make 2507 stainless steel round bar suitable for structural applications including bridge construction and more.