super duplex sheet coil plate sheet 1.4410 1.4501 coil

A789 UNS S31803 and UNS S32205 are two grades of duplex stainless steel that are widely used in various industrial applications. These Duplex S31803 Seamless Pipes are known for their excellent corrosion resistance, high strength, and good weldability. A789 is a specification that covers seamless and welded tubes made from duplex stainless steel.

It is widely used in offshore oil and gas exploration/production and in heat exchangers in petrochemical/chemical processing.

Higher chromium, molybdenum and nitrogen content results in a Pitting Resistance Equivalent Number (PREN) > 40, providing superior pitting and crevice corrosion capabilities to austenitic and duplex stainless steels in virtually all corrosive media, and critical pitting temperature Above 50¡ãC .

ASTM A240 Type 2205 Plate is a duplex stainless steel plate that is used extensively in various industries such as chemical processing, oil and gas exploration, and marine engineering. SA 240 GR 2205 Sheet is made from grade 2205 stainless steel, which is a combination of ferritic and austenitic steel.

Duplex 2507 has high resistance to chloride stress corrosion cracking, high Strength, and superior resistance to chloride pitting and crevice corrosion.

The duplex microstructure allows this grade of high strength super duplex UNS S32750 bar to have a lower coefficient of thermal expansion and higher thermal conductivity than austenitic steels and is suitable for operating temperatures up to 300¡ãC.

Both ASME B16.5 and ASME B16.47 have endorsed pipe flanges made from a series of duplex stainless steel grades.

ASTM A790 Duplex 2205 Pipe are precise and used in sensitive applications.

Duplex plates have a two-phase or two-phase microstructure. The microstructure of the duplex steel S32205 foil consists of equal proportions of ferrite and austenite.

They have a design that allows for the pipes to pass through the flange and locate the correct point for connection. The ASTM A182 grade F53 WNRF Flange has a welded neck raised face.

Alloy 2205 duplex stainless steel plate has better pitting and crevice corrosion resistance than 316L or 317L austenitic stainless steel in almost all corrosive media.

2507 (UNS S32750) is a super duplex stainless steel designed for applications requiring excellent strength and corrosion resistance.

Duplex 2507 (UNS S32750) is a super duplex stainless steel with 25% chromium, 4% molybdenum, and 7% nickel designed for demanding applications which require exceptional strength and corrosion resistance, such as chemical process, petrochemical, and seawater equipment.

Super Duplex stainless steel offers the same advantages as its Duplex counterpart. The main difference between the two is that Super Duplex has a higher chromium and molybdenum content, resulting in increased corrosion resistance.

2507 Duplex is highly resistant to uniform corrosion by organic acids such as formic and acetic acid.

Duplex stainless steel 2205 alloy is a compound stainless steel composed of 22% chromium, 2.5% molybdenum and 4.5% nickel nitrogen alloy.
It has high strength, good impact toughness and good overall and local stress corrosion resistance.

It reaches the phase balance of austenite and ferrite in roughly same volume fraction.

Compared with ferrite, it has higher plasticity and toughness, no room temperature brittleness, significantly improved intergranular corrosion resistance and welding performance, and maintained 475 ¡æ brittleness, high thermal conductivity and Superplasticity of ferritic stainless steel. Compared with austenitic stainless steel, its yield strength is significantly improved, and its resistance to intergranular corrosion, stress corrosion, corrosion fatigue and abrasion is significantly improved.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

ASTM A240 is a normative standard covering several chromium-based stainless steel grades manufactured in sheet, sheet, or ASTM A240 Gr 2205 strip.

The high chromium, molybdenum, and nitrogen levels provide excellent resistance to pitting, crevice, and general corrosion.

Light gauges of 2507 material can often be used to achieve the same design strength of thicker nickel alloys. Duplex 2507 plate is suitable for applications requiring excellent strength and corrosion resistance. It contains 25% chromium, 4% molybdenum and 7% nickel.

Duplex stainless steel fasteners are available in Super Duplex, Lean Duplex and Standard Duplex grades, each with specific properties for differenut applications.

The corrosion resistance properties of Duplex 2205 Pipe is much better as compared to alloy grade 316.

ASTM A815 specification covers two general classes, WP and CR, of wrought ferritic, ferritic/austenitic, and martensitic stainless steel fittings of seamless and welded construction. Class WP fittings are subdivided into four subclasses: Classes WP-S, WP-W, WP-WX, and WP-WU. The material for fittings shall consist of forgings, bars, plates, or seamless or welded tubular products.
Teel Industry has grown in the past few decades and there are a variety of products available in the market. ASTM A815 UNS S32750 Pipe Fittings are one of those products and are available in various sizes, shapes, and dimensions. ASTM A815 UNS S32760 Pipe Fittings are designed to be resistant to corrosion and are said to have perfect weldability. These Super Duplex S32750 Buttweld Fittings are resistant to erosion corrosion and fatigue. They have a mixed microstructure of 50% austenitic and 50% ferrite.

Duplex 2205 stainless steel (ferritic and austenitic) is widely used in applications requiring good corrosion resistance and strength. UNS S31803 grade stainless steel was modified several times to form UNS S32205, which was approved in 1996. This grade offers higher corrosion resistance.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.60

For duplex S31803 nuts, 2 minutes to 3 minutes per mm of wall thickness at temperatures around 1080 degrees Celsius is sufficient to achieve a balanced austenite/ferrite ratio. After annealing, it is recommended to cool these Duplex S32205 nuts as soon as possible.

Duplex stainless steel, famous for its excellent combination of good mechanical properties and high corrosion resistance, is widely used in the industrial fields, such as the production of seawater heat exchangers and the chemical containers for use in the high-concentration chloride environments.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

Super Duplex 2507 cannot be strengthened by heat treating. Annealing is performed at 1920¡ãF – 2060¡ãF (1049¡ãC – 1127¡ãC), followed by rapid cooling.

The high oxidation resistance property of Grade 2205 is marred by its embrittlement above 300¡ãC. This embrittlement can be modified by a full solution annealing treatment. This grade performs well at temperatures below 300¡ãC.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

Duplex steels are characterised by high chromium (19¨C28%) and molybdenum (up to 5%) and lower nickel contents than austenitic stainless steels. The most used duplex stainless steels are the 2205 (22% Chromium, 5% Nickel) and the 2507 (25% Chromium, 7% Nickel); 2507 is known as ¡°super duplex¡± due to its higher resistance to corrosion.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

ASTM A1082 specification alloy S31803 fasteners have higher pitting and crevice corrosion than stainless steel alloy 316. Due to its higher corrosion resistance, alloy grade UNS S31803 is able to exhibit better fatigue strength than other commonly used austenitic stainless steel grades in environments containing corrosive media.

Duplex is often found in desalination and pressure vessel equipment located in port cities.

Duplex steels are also magnetic, a property that can be used to easily distinguish them from ordinary austenitic stainless grades.

The ASTM A790 Duplex Welded Pipes are an example of welded duplex pipe. There are different grades of duplex pipes with different mechanical properties. There are duplex, super duplex and lean categories in the Duplex Pipes varieties. The Seamless Duplex Pipes are both strong and is highly corrosion resistant.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”