sus304 uns s30400 round bar duplex 13mm stainless steel rod end with stud

Steel bars are one of the core components of any manufacturing
industry or for that matter any industry that relies on machineries.
Thanks to its versatile applications, steel bars find itself in the
epicenter of most of engineering industries, be it automotive, textile,
fabrication, construction, cement, ship building, paper and pulp,
defence, heavy earth moving equipments or aerospace.
The overwhelming popularity of steel bars is owed to the fact that
it is possible to be produced in varying types, shapes, sizes, and
grades of bars to cater the exact technical requirements. Steel
bars generally have the shapes such as flat, round, hexagonal,
square and channel and on most of the occasions, it is the shape
of the bar that defines its application area

Features of ferritic stainless steel bars are: chromium base, typically less than 0.1% carbon, increased resistance to harsh environmental conditions, increased resistance to stress corrosion cracking (SCC), greater susceptibility to intergranular corrosion, and increased susceptibility to intergranular corrosion at very low Brittle at temperature, most often used for fairly thin sheets or pipes, since welds are not particularly tough.

Precipitation hardening stainless steels are characterised by the addition of aluminium, niobium and copper to very high strengths Relatively machinable without significant deformation, depending on the additives more or less corrosion resistance compared to other types but higher Corrosion resistance results in considerable costs.

The Stainless Steel 304 Round Bar, as the name suggests is made up of 304 grade stainless steel material. It has around 18% chromium and 8% nickel in its chemical composition. The round bar shows high resistance to corrosion and enhanced strength properties. The material is quite strong with around 515 Mpa min tensile strength and min yield strength of 205 MPa.

310 Stainless Steel Rods at Competitive or Lowest Prices – At HT PIPE, we are committed to providing our customers with the lowest possible prices for 310 Stainless Steel rods. We can also offer quantity discounts as the quantity increases.

About the ductility of stainless steel bars
Ductility is often given by % elongation during tensile testing. The elongation of austenitic stainless steel is quite high. High ductility and high work hardening rates allow austenitic stainless steels to be formed by demanding processes such as deep drawing.

ASTM A479 can be described as a standard specification for stainless steel bars. They are available in custom shapes and sizes for use in boilers and pressure vessels. The material specification is available in four grades including austenitic, austenitic-ferritic, ferritic and martensitic grades. They have good mechanical properties such as high tensile strength, yield strength, elongation, etc. These can be used for hot and cold working bars.

We have a large selection of stainless steel rods for sale, ranging in diameter from 3mm to 152mm. We supply stainless steel rods in standard lengths of about 3 meters, but we can also cut rods up to 5 meters for you. We offer stainless steel bars in grades 304 and 316. Grade 304 is a general purpose grade and is ideal for welding. Grade 316 has excellent corrosion resistance. Therefore, it is often used outdoors, or in particularly harsh environments such as marine environments.

Grade 304 – This is a standard “18/8” stainless steel with excellent forming and welding characteristics. 304L is a low carbon version of 304 and does not require post weld annealing. This makes it ideal for heavy components.

Applications for 410 stainless steel rods are valve and pump parts, fasteners, cutlery, turbine parts and bushings.

Higher operating temperatures for ASTM A276 Type 304 bars are possible due to the material’s high melting point of 1400 degrees Celsius. Bars come in different sizes, sizes and types such as ASTM A479 GR 304 Bright Bar and SS 304 Round Bar. A479 is a specification covering hot rolled bar, cold drawn bar, and pressure vessel bar. The pressure vessel code requires SS UNS S30400 hot rolled bar to be able to handle high pressures. The material can have different sizes.

HT PIPE is one of the well-established manufacturers and suppliers of Stainless Steel 316Ti Bar.

Grade 304 (aka 1.4301, 1.4037, 18/8, A2) Stainless Steel Round Bars
Grade 304 is the most popular stainless grade. These round bars are easily TIG, ARC and MIG welded and can also be brazed. While grade 304 is not a machinable grade of stainless steel (grade 303 is best for machining), it can be machined under the right conditions.

Steel bars are one of the core components of any manufacturing
industry or for that matter any industry that relies on machineries.
Thanks to its versatile applications, steel bars find itself in the
epicenter of most of engineering industries, be it automotive, textile,
fabrication, construction, cement, ship building, paper and pulp,
defence, heavy earth moving equipments or aerospace.
The overwhelming popularity of steel bars is owed to the fact that
it is possible to be produced in varying types, shapes, sizes, and
grades of bars to cater the exact technical requirements. Steel
bars generally have the shapes such as flat, round, hexagonal,
square and channel and on most of the occasions, it is the shape
of the bar that defines its application area

For stainless steels 304, 316, 304L,347, some alloys are better suited for welding, or easier to machine than others, generally austenitic steels are easier to weld than most other alloys, but there are exceptions depending on the stainless steel you may need Types of finishes and treatments.

347 stainless steel is an austenitic stainless steel with excellent resistance to intergranular corrosion when exposed to chromium carbide precipitation temperatures ranging from 800 to 1500 degrees Fahrenheit. Alloy 347 with tantalum – tantalum (known as niobium) has good mechanical properties at high temperatures.

The absolute roughness of hot rolled stainless steel round bars is higher than that of drawn bars. This is not a problem when rebar is only used for strength and corrosion resistance properties. But when the bar is used for aesthetic applications and outdoor fixtures, cold drawn stainless steel round bar is preferred because of its smooth surface and less absolute roughness. Bars can also vary in size. Typical range is 5mm to 450mm radius.

Stainless steel round bars 3mm to 90mm cold drawn and polished, larger diameter peeled and polished. Stainless steel round bars are ordered according to ISO H9 (H tolerance is negative). European Steel Stock Stainless Steel Round Bars are available in the following grades 303, 304, 316, 431 EN 57, 904L Other grades available on request. The length is random and varies between 4 and 6 meters. We offer a full cut service so we can provide the exact size and length you need.

Round bars can be manufactured using cold-finishing or hot-finishing processes, and are often available in many different grades and diameters, making them suitable for many different applications. Grade 303 – This is generally considered the best grade for machining, so is naturally popular in projects that require a lot of machining.

This stainless steel round bar is very weldable. Strength, corrosion resistance and simplified manufacturing can make it a cost-effective alternative to high strength carbon steel and other stainless steel grades.

Likewise, very heat-resistant alloys may significantly increase susceptibility to corrosion at these higher temperatures
In fact, in most non-specialized environments or installations, it may be better to use lower grades of heat resistance such as 304, 304l, 316, and 347 stainless steel bar.

A round bar is a long cylindrical metal bar stock that has many industrial and commercial applications. The most common application is shafts. Products are usually measured by measuring their diameter. Standard diameters range from 1/4″ all the way up to 24″. Other sizes may be available.

The standard for ASTM A276 specification covers both, hot -finished or cold-finished stainless steel bars with the exception of re-forged bars. The ASTM A276 Type 304 is one of the most commonly used and versatile grades of stainless steel.

17-7PH provides high strength and hardness with minimal deformation under heat treatment. The alloy has good formability and excellent fatigue properties with good corrosion resistance.

The degree of magnetic responsiveness of stainless steel is determined by its microstructure, so certain types of stainless steel alloys can be manipulated during the processing stage to make them more or less magnetic.
Generally, austenitic stainless steels are considered non-magnetic and suitable for magnetically sensitive applications, while other types of stainless steel alloys (including duplex, ferritic and martensitic) can be made with higher magnetic properties

Stainless steel is a martensitic precipitation hardening stainless steel with high strength, good corrosion resistance, good mechanical properties at temperatures up to 600¡ãF (316¡ãC), both in the base metal and in the weld Good toughness, along with short, low temperature heat treatment, minimizes warpage and fouling. This versatile material is widely used in the aerospace, chemical, petrochemical, food processing, paper and general metalworking industries.

The combined strength of stainless steel bar tends to be inversely related to its corrosion resistance, so a good balance is important, be aware that the strongest stainless steel alloys available may not be suitable for 95% of applications and structural use in environments.

AL-6XN ? alloy (UNS N08367) is a low carbon, high purity, nitrogen containing “super austenitic” stainless steel alloy. AL-6XN alloy is designed to be a seawater resistant material and has been shown to resist a wide range of corrosive environments.

Steel bars are one of the core components of any manufacturing
industry or for that matter any industry that relies on machineries.
Thanks to its versatile applications, steel bars find itself in the
epicenter of most of engineering industries, be it automotive, textile,
fabrication, construction, cement, ship building, paper and pulp,
defence, heavy earth moving equipments or aerospace.
The overwhelming popularity of steel bars is owed to the fact that
it is possible to be produced in varying types, shapes, sizes, and
grades of bars to cater the exact technical requirements. Steel
bars generally have the shapes such as flat, round, hexagonal,
square and channel and on most of the occasions, it is the shape
of the bar that defines its application area