Inconel flange

Our 718 Inconel Alloy Flanges are designed in a variety of pressure rating configurations, and these flanges offer excellent features such as robust construction, durability, and high performance.

Inconel 601 Flanges Inconel 601 is a nickel-chromium alloy used for applications that require resistance to corrosion and heat. This nickel alloy stands out due to its resistance to high temperature oxidation, remaining highly resistant to oxidation through 2200¡ã F. Alloy 601 develops a tightly adherent oxide scale which resists spalling even under conditions of severe thermal cycling.

Inconel UNS N06601 Pipe Flanges nconel 601 is a nickel-chromium alloy used for applications that require resistance to corrosion and heat. This nickel alloy stands out due to its resistance to high temperature oxidation, remaining highly resistant to oxidation through 2200¡ã F. Alloy 601 develops a tightly adherent oxide scale which resists spalling even under conditions of severe thermal cycling.

Inconel 601 Flanges are made up of a nickel chromium alloy. The material grads range differently with the composition ratio. The 601 grade has 58% nickel, 21% chromium, carbon, manganese, silicon, sulfur, copper and iron in the composition.

nconel 600 Flanges are made up of a material that has carbon, manganese, silicon, sulfur, copper, iron, nickel and chromium. This is a nickel chromium alloy as it contains 72% nickel and 14% chromium minimum

ASTM B564 UNS N08825, also known as Incoloy 825, is a high nickel alloy that is used in high corrosion and high temperature applications. It has different designations in different countries: ASTM B424 Gr. UNS N08825(US), DIN 17750 Gr. 2.4858, JIS G4902 Gr. NCF 825.

inconal 600 is a nickel-chromium alloy used for applications that need high temperature resistance and corrosion. This nickel alloy was developed for service temperatures from cryogenic to elevated temperatures in the range of 2000¡ã F.

Inconel 601 Flange
Inconel 601 Flanges are made up of a nickel chromium alloy. The material grads range differently with the composition ratio. The 601 grade has 58% nickel, 21% chromium, carbon, manganese, silicon, sulfur, copper and iron in the composition. There are different types such as socket weld flanges, welded neck flanges, Inconel 601 Slip On Flanges, orifice flanges and so on. The flanges made of this material are strong, corrosion resistant to acids, reducing agents and oxidation and are also harder.

incoloy alloy 600 flange the Inconel 600 Slip on Flange demonstrates excellent resistance to not only inorganic compounds but also organic compounds along with alkali compounds as well. Therefore, if used in the paper industry, the ANSI B16.5 Slip on Flange has a good notable performance. Also, the Inconel 600 Weld Neck Flange has excellent immunity to chlorine ion stress corrosion cracking.

Inconel 718 is a nickel-based superalloy ideal for applications requiring high strength in the temperature range from cryogenic to 1400¡ãF. Inconel 718 also has excellent tensile and impact strength.

Inconel 718 has good resistance to oxidation and corrosion at temperatures within the effective strength range of the alloy in the atmospheres encountered in jet engine and gas turbine operation.

Inconel 718 is a nickel-chromium-molybdenum alloy designed to resist a variety of severe corrosive environments, pitting and crevice corrosion. This nickel steel alloy also exhibits extremely high yield, tensile and creep rupture properties at elevated temperatures.

Uses of this nickel alloy range from cryogenics to long-term use at 1200¡ãF. One of the distinguishing features of the Inconel 718 composition is the addition of niobium to allow age hardening, allowing annealing and welding without spontaneous hardening during heating and cooling.

The addition of niobium, along with molybdenum, hardens the matrix of the alloy and provides high strength without the need for a strengthening heat treatment. Other popular nickel-chromium alloys are age hardened by adding aluminum and titanium. This nickel steel alloy is easy to manufacture and can be welded in the annealed or precipitation (age) hardened condition. This superalloy is used in a variety of industries such as aerospace, chemical processing, marine engineering, pollution control equipment and nuclear reactors.

ASTM B564 UNS N06600 alloy is used in a variety of corrosion resistant applications. Alloy 600’s high nickel content provides resistance to reducing environments, while the material’s chromium content provides resistance to weaker oxidizing environments. The material has excellent resistance to chloride stress corrosion cracking.

Inconel 601 flanges are made of nichrome. The material grade varies with the composition ratio. The composition of grade 601 is 58% nickel, 21% chromium, carbon, manganese, silicon, sulfur, copper and iron.

Inconel 625 flanges are made from a corrosion-resistant, high-strength nickel-chromium alloy with a composition of 58% nickel and 20% chromium, as well as carbon, manganese, silicon, sulfur, copper and iron.

Flanges are used either to connect two pipes or to stop the flow in the pipe. Inconel 600 flanges are usually used in gas turbine engine ducting, spray bars, chemical plants, combustion liners, and furnace hardware. When put through a heat-treated application Inconel Plate Flange does not lose shape. ASME/ANSI B16.5 Inconel Alloy Flange is used in the aviation industry as jet engines are exposed to rapid heating and cooling.

ALLOY601 is a solid solution strengthened Ni-Cr-Fe alloy with additions of Al + Ti. And there are different functional types such as the ASME SB564 Alloy 601 Lap Joint Flange, slip on flanges, weld neck flanges, socket weld flanges and orifice flanges.

The face type of the flanges vary as flat face, raised face and ring type joint. The sizes of the flanges range from ? inches to 48 inches and the pressure ALLOY 600 is a heat resistant alloy on account of its excellent resistance above 550 C (1022 F) against hot gases and combustion products, as well as against molten salt and molten metal corrosion, while at the same time exhibiting good mechanical short-time and long-term properties. vary.

Known to be one of the more heat resistant alloys, the Alloy 600 Blind Flange may be used with the intention of closing or shutting off a nozzle or a section of a pipe in a vessel, particularly in elevated temperature settings. Inconel 600 Flanges are made up of a material that has carbon, manganese, silicon, sulfur, copper, iron, nickel and chromium. This is a nickel chromium alloy as it contains 72% nickel and 14% chromium minimum.

By itself, nickel has great heat resistance properties, but when alloyed with other elements, it gains many properties, just like in the case of the Inconel 600 Flanges. HT PIPE is a leading supplier and manufacturer of the Inconel 600 Flanges in different shapes, types and scales. The flanges come in different varieties such as GOST flanges, JISB2220, BS1560-3.1 and so on. The pressure ranting of the flanges vary from class 1500 to class 600.

HT PIPE maintains a large inventory of Inconel 625? flanges, with a variety of sizes, styles, and configurations available to meet your needs. Our Inconel flanges meet the requirements of numerous national and international specifications, including, but not limited to:
N06625
ASTM B564
ASME SB564
WERKSTOFF Nr 2.4856

For shielded metal – arc welding, these Inconel 625 Socket Weld Flanges has excellent operability. Post-weld heat treatment of Inconel 625 Weld Neck Flanges is not necessary to maintain corrosion resistance. Due to ability of Inconel 625 fasteners to prevent, stress, crevice and pitting corrosion, it is utilized in a diversity of corrosive environments. In mild applications such as atmosphere, fresh or salt water, neutral salts and alkaline media is is almost completely resistant. In more severe situations the nickel and chromium content provides resistance to oxidizing chemicals.

Inconel 625 exhibits high resistance to corrosion and oxidation, high strength and toughness, and excellent fatigue strength. This nonmagnetic, nickel-based alloy also offers an extremely broad working temperature range¡ªfrom cryogenic to 2,000¡ãF (1,093¡ãC).

Post-weld heat treatment of Inconel 625 Weld Neck Flanges is not necessary to maintain corrosion resistance. In order to restore the best balance of properties, all hot or cold worked parts of these Inconel 625 Threaded Flanges should be annealed and rapidly cooled. In more severe situations the nickel and chromium content provides resistance to oxidizing chemicals. Inconel 625 (2.4856) fasteners and flanges are also resistant to nonoxidizing environments. Better understand Inconel 625’s corrosion resistance to:
Sulfuric Acid
Hydrochloric Acid
Phosphoric Acid

Resistance to carburization is good. Alloy 601 has also shown good resistance in carbonitriding conditions, if a sufficiently high oxygen partial pressure is present. The applications of the 601 Alloy Weld Neck Flangeis in the chemical, power plant, petroleum and petrochemical industrial applications.

As they are workable at reducing and oxidizing temperatures, our ASTM B564 Inconel 625 Raised Face Flanges are non-permeable, have a high strength and excellent machinability and resist sulfur compounds in the sour service sector. Our DIN 2.4856 Inconel 625 Welded Flanges are impervious to seawater and crevice corrosion and have excellent welding and forming abilities. The properties of Incoloy 625 Forged Flanges which makes them an excellent or ideal choice for sea-water applications includes the facts that the alloy is free from local attack such as pitting and crevice corrosion, it has a high corrosion-fatigue strength, high tensile strength, as well as its good resistance to chloride-ion stress related corrosion cracking.

Inconel 625 Material can be used as propeller blades for motor patrol gunboats, wire rope for mooring cables, submarine auxiliary propulsion motors, sheathing for undersea communication cables, submarine quick disconnect fittings, exhaust ducts for Navy utility boats, submarine transducer controls, and steam-line bellows. We have built and designed our products to meet market demands and requirements. We deliver products that are 100% durable.

The material of the Asme B16.5 Inconel 625 flange is a nickel-chromium alloy. Some of the main reasons why Inconel 625 is highly regarded are its high tensile strength, excellent processability (including joinability), and excellent corrosion resistance.