Stainless steel forged pipe fittings

Weldolets are the most popular type of branch fittings, belong to the buttweld fittings family, and are available in a wide range of dimensions.

A Sockolet is similar to a Weldolet, with the difference that the branch pipe is connected to the run pipe, via the fitting, with a socket weld connection as per ASME B16.11. Likewise Weldolets, Sockolets are used to make a 90-degree pipe branch. Sockolets may be ¡°size on size¡± or ¡°reducing¡±.

Half Coupling is used for small bore branching from a vessel or large bore pipe. It can be threaded or socket type. It has a socket or thread end on only one side.

ASME B16.11 Threadolet is the most popular branch connection: the branch is made by welding the item to the outlet of the run pipe. The ends of a Threadolet are bevelled to facilitate the welding process, and for this reason. Threadolet belongs to the family of butt weld fittings.

The 150 PSI union pipe fitting has three pieces and includes a threaded connection that can be screwed or unscrewed to connect or disconnect pipes more easily than couplings. It features NPT threads on both ends which create tighter seals than straight threads.

Pipe plugs are defined as cap end of fractional tubes used in a large number of industries. These pipe plugs are designed to insert into the end of tubing to dead-end the flow. Various materials are used to manufacture high quality tube plugs in a variety of end connections.

Global Supplier of ANSI B16.9 90 Deg Pipe Fittings Elbow, Buttweld Elbow 90 Degree, Butt Weld Long Radius 90 Degree Elbows, Stockist of Stainless Steel 90 Deg. Elbow, 90 degree Short Radius Elbow Dealer in China, ASME B16.9 90 deg Long Radius Elbow, Schedule 10 90 Degree Elbow.

A fitting or adapter is used in pipe systems to connect straight sections of pipe or tube, adapt to different sizes or shapes, and for other purposes such as regulating (or measuring) fluid flow.[1] These fittings are used in plumbing to manipulate the conveyance of water, gas, or liquid waste in domestic or commercial environments, within a system of pipes or tubes.

Threadolet is a type of self-reinforced branch fitting developed by a Company called Bonney Forge. It is used whenever threaded branch connections are required from the pipe header. Mostly, it is used for small size piping with a low-pressure application.

Being a trailer product, threadolets are designed for specific conditions based on Process piping Code ASME B31.3, hence, Dimension is also specified by the designer. However, MSS-SP-97 provide dimension requirements for standard 90¡ã self-reinforced branch connection with butt, socket and threaded end types

The HT PIPE couplings are designed for the repair of damaged pipes. To?install the split repair couplings, it is not necessary to remove a piece?of pipe from the pipe, which considerably reduces the time and?material required during repairs.

Boss is a pipe attachment detail in which a pipe is inserted into a recessed area of a Valve, fitting or flange. In contrast to buttweld fittings, Socket Weld Fittings are mainly used for small Pipe Diameters (Small Bore Piping); Generally for Piping whose Nominal Diameter is NPS 2 or smaller.

A?threadolet?is the same basic design as a “weldolet.” However the main difference is the fitting has a female threaded connection to mate to the branch connection. This makes a 90¡ã branch and comes in full size or reducing for a straight piece of pipe.

Outlet fittings are forged products with high strength and clear cost advantages over conventional pipe branching techniques.

The Flexseal HT PIPE couplings are characterized by several special features. They can be easily and quickly assembled without losing their sealing performance and reliability against the conventional design. The HT PIPE couplings are available in any size from 300 mm to 2100 mm.

Couplings are pipe fittings that serve to prolong or stop pipeline operations. Such fittings also help to adjust the thickness of the tubing. It also helps to patch a pipe that is broken or leaking.

A Pipe Coupling, used in piping or plumbing, is a very short length of pipe or tube with either socket or female pipe threads at one or both ends that allows two pipes or tubes of equal or different sizes to be joined together. Couplings are pipe fittings that help to extend or terminate pipe runs. These fittings are also used to change pipe size. It¡¯s also used to repair a broken or leaking pipe.

The body of a pipe coupling is typically made of either the same or similar materials as that of the pipes it joins. They may be rigid or flexible depending on the amount of movement the pipe is subjected to and may also be permanent or removable.?

Strength and toughness indicators are among the best among all steels. Its most prominent advantage is corrosion resistance. Stainless steel must be used in highly corrosive occasions such as chemical papermaking. Of course, the cost is also higher!

304 stainless steel elbow is a pipe fitting that connects two pipes with the same or different nominal diameters in the piping system, so that the pipes are bent at a certain angle. According to the angle, the most commonly used are 45¡ã, 90¡ã, 180¡ã. In addition, according to engineering needs, other abnormal angle elbows such as 60¡ã are also included. The connection methods with the pipeline include direct welding (the most common method), flange connection, threaded connection, socket connection, etc.

A pipe cap, also known as a head, a plug, or a baffle, is a pipe fitting that is welded on the pipe end or installed on the external thread of the pipe end to cover the pipe. It is used to close the pipe, and the function is the same as the pipe plug.

Tube caps are used as protective devices designed to protect tube ends of various shapes. The main purpose of using pipe caps is to waterproof connections. They are also used to close the ends of hydraulic or pneumatic pipes and tubes.

They are used in plumbing fixtures such as domestic, commercial and industrial water supply lines, machinery and process equipment. They are also installed on the pump line and their sole purpose is to remove air blockages.

The main difference between stainless steel bottle caps and carbon steel bottle caps is the difference in material. The chemicals contained in stainless steel caps will keep the surface of the cap from rusting and corroding for a long time.

Stainless threaded caps are cast from high quality 304/304L/316/316L stainless steel and have female threaded cap ports.

Stainless steel threaded pipe caps cover pipe ends, stop fluid flow and protect pipe threads. These stainless steel caps are commonly used to direct flow to a specific end in a multi-end fitting, and stainless steel cap types include hexagonal and round caps.

Pipe caps are used to connect pipes of different diameters and are widely used in various chemical, construction industries, paper, cement and shipyards.

The pipe cap is directly welded to the mold at the end of the pipe; the end of the pipe can also be welded with a flange, and then blocked with the flange. If necessary, the flange can be opened to inspect the inside of the pipe. Traditional thick wall gland seat; forged; large diameter by rotation. After maintenance or even wiring is required, use a blind pipe, not later, use a pipe cap. Using a blind plate has the possibility of leakage. After a long time, the screws will rust and die, which is also useless, and the heat pipe is not easy to insulate.

The products we offer meet standards such as ASME B16.11 and ANSI B16.9 and are regularly inspected at every stage of production to ensure high quality, corrosion resistance and high durability.

Fittings are used to connect two or more lengths of pipe or to close pipe ends. Fittings can connect pipes in a straight line, change flow direction, increase or decrease flow, or close pipe ends to stop flow.

AISI 316 stainless steel has better corrosion resistance than 304 stainless steel and has good corrosion resistance in pulp and paper production. In addition, 316 SS has good corrosion resistance in marine and corrosive industrial environments.