stainless steel pipe

For 304 stainless steel tube heat resistance, it has good oxidation resistance in intermittent use at 8700C and continuous use at 9250C. Continuous use of 304 in the 425-8600C range is not recommended if subsequent water corrosion resistance is important. Grade 304L is more resistant to carbide precipitation and can be heated to the above temperature range.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.42

304 stainless steel tube heat treatment, solution treatment (annealing) – heat to 1010-11200C and cool rapidly. These grades cannot be hardened by heat treatment.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.43

The carbon content of 304L (UNS 30403) is limited to a maximum of 0.03% to prevent sensitization during welding.

304 stainless steel has excellent resistance to a wide range of atmospheric environments and many corrosive media. It will experience pitting and crevice corrosion in warm chloride environments, and stress corrosion cracking above about 60 ¡ãC. It is considered to be resistant to pitting corrosion in water up to about 400 mg/L chloride at ambient temperature, decreasing to about 150 mg/L at 60 ¡ãC.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.29

304 stainless steel is also very sensitive to thiosulfate anions released by the oxidation of pyrite at room temperature (as encountered in acid mine drainage), and when in close contact with pyrite-exposed or sulfide-rich clay materials, Serious pitting problems can occur. oxidation.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.30

For more severe corrosion conditions, when 304 stainless steel is too sensitive to pitting or crevice corrosion in chlorides or general corrosion in sour applications, 316 stainless steel is often replaced.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.31

304, 304H and 304L all have the same nominal chromium and nickel content and therefore have the same corrosion resistance, ease of manufacture and weldability.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.32

304 Stainless Steel is a low carbon (0.08% max) version of base 18-8, also known as 302. Type 302 contains 18% chromium and 8% nickel.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.33

Type 304 is slightly less strong than 302 due to its lower carbon content. Type 304 is widely used in welding applications because the low carbon allows some exposure to carbide precipitation in the 800¡ãF – 1500¡ãF range without the need for post annealing operations.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.34

304 is the original “18-8″ stainless steel. It is produced more than any other austenitic stainless steel. 304 provides useful corrosion resistance in many environments ranging from moderately reducing to moderately oxidizing. It is common for 304L to meet the mechanical properties of 304 straight grades through the controlled addition of nitrogen. Therefore, most products are dual certified for 304 and 304/304L.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.19

Type 304L has a carbon content of 0.03% or less. This alloy can be used in the as-welded state without being affected by intergranular corrosion.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.35

304 stainless steel is a common material in stainless steel, with a density of 7.93 g/cm3, also known as 18/8 stainless steel in the industry. High temperature resistance of 800 ¡æ, good processing performance, high toughness, widely used in industry and furniture decoration industry and food and medical industry.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

The carbon content has a large effect on room temperature strength, so the specified minimum tensile properties for 304L are 5 kg per square inch (34 MPa) lower than for 304. However, nitrogen also has a large effect on room temperature strength, and the addition of very little nitrogen produces 304L with the same tensile strength as 304. So virtually all 304L is produced as dual certified 304/304L, which means it meets the minimum carbon content of 304L and also meets the minimum tensile strength of 304.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.36

304 is a general purpose stainless steel widely used in the manufacture of equipment and parts that require good overall properties (corrosion resistance and formability). In order to maintain the inherent corrosion resistance of stainless steel, the steel must contain more than 18% chromium and more than 8% nickel. 304 stainless steel is a stainless steel grade produced according to the American ASTM standard.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.21

Stainless steels 304 and 304L are also known as stainless steels 1.4301 and 1.307, respectively. Type 304 is the most versatile and versatile stainless steel. It is still sometimes referred to by its old name, 18/8, which is derived from the Type 304’s nominal composition of 18% chromium and 8% nickel.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.37

304L stainless steel, also known as ultra-low carbon stainless steel, is a versatile stainless steel material that is widely used in the manufacture of equipment and parts that require good comprehensive properties (corrosion resistance and formability).
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.22

Type 304 stainless steel is an austenitic grade that can be heavily deep drawn. This characteristic has led to 304 being the primary grade used in applications such as sinks and pans.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.38

304L is a variant of 304 stainless steel with a lower carbon content and is used where welding is required. The lower carbon content minimizes carbide precipitation in the heat-affected zone near the weld, which can lead to intergranular corrosion (welding corrosion) of stainless steel in some environments.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.23

304/304L stainless steel is a dual grade steel. This stainless steel combines the high strength of 304 stainless steel and the corrosion resistance of 304L stainless steel. This material is commonly used in the food and beverage processing industry as well as in the dairy industry.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.24

Alloy 304 (S30400) and 304L (S30403) stainless steels are variants of 18% chromium – 8% nickel austenitic alloys and are the most common and commonly used alloys in the stainless steel family.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.25

High strength, excellent corrosion resistance, and minimal carbon content allow Alloy 304 and 304L stainless steels to be used in applications requiring welding. Uses include architectural molding and trim, welded components for chemical, textile, paper, pharmaceutical and chemical industry processing equipment.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.26

The advantages of 304 and 304L are their oxidation resistance, excellent formability, ease of manufacture and cleaning, excellent strength-to-weight ratio, and good toughness at low temperatures.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.27

For severely corrosive environments, lower levels of Type 304L are preferred due to its greater resistance to intergranular corrosion.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.28

Tube is manufactured in round, square and rectangular sections in a variety of wall thicknesses. It is usually manufactured by the processes of longitudinal welding, hot and cold drawing (seamless) or spiral welding. Finishes or appearance range from unpolished to highly polished. Unpolished has a 2B mill finish, standard polished is a finely grit polished finish and there is a finer buffed finish giving close to mirror appearance. Finishes are selected to suit application and aesthetic appeal.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

Stainless seamless tubing is the preference when critical applications call for higher working internal pressures and enhanced corrosion resistance in extreme environments.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

Stainless steel needs to be cold worked to generate higher tensile strength. Type 304 has slightly lower strength than 302 due to its lower carbon content. Stainless Steel 304 Pipes and Tubes Available are following Specification, Grades and Size.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

316 Stainless Steel Characteristics
Type 316 stainless steel tubing is similar to 304, but with the addition of molybdenum, which improves the alloys corrosion resistance. The austenitic structure allows excellent toughness, even down to extremely low temperatures. These grades have excellent weldability, with or without the addition of filler metal. 316 / 316L stainless tube is available as round, square or rectangular shapes. It is available as welded and seamless. It contains additional molybdenum and nickel than 304 stainless, which increases corrosion resistance of the metal. Decreased weldability is exhibited in 316L alloys due to increased carbon in the alloy. It is used for tube in more aggressive environments than 304 tube.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

Coiled tubing makes long length tube installations possible without the need for joining fittings. This reduces installation time and costs as well as eliminates potential leak points. We stock both seamless and welded tube coils to meet the needs of petrochemical, compressed natural gas (CNG), geothermal, and flow measurement applications. Coiled tubing can be provided in long mill lengths that stretch over a mile, or in custom cut-to-length sections as short as fifty feet.

Stainless Steel pipe and tube is available in many different grades and finishes. The most common grades are type 304/304L and type 316/316L. Some of the more exotic grades are type 304H, type 309 and 309H, type 310 and 310H, type 317, type 321 and type 347. And Duplex Stainless grades are type 2205 and 2507
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

316 / 316L tubing is used mainly as seamless for pressure operations in extremely corrosive environments, such as acid processing and waste treatment equipment and salt water marine applications. Welded tube is used for structural applications such as handrails, machine supports for processing equipment and architectural supports.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20