stainless steel seamless pipe

Stainless steels are high-alloy steels which have higher corrosion resistance compared to other steels due to the presence of large amounts of chromium. Based on their crystalline structure, they are further divided into ferritic, austenitic, and martensitic steels.
Grade 309 stainless steel has high corrosion resistance and strength compared to 304 stainless steel.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

ASTM A213 / A269 standard specification is applied for seamless stainless steel tubing, ASTM A249 / A269 for welded tube, with both bright annealing finish and annealing pickling finish, generally, seamless coil tubing can be provided in no risk of impurities that are often associated with welding tube, seamless tubing is the preferred option for critical applications.

Stainless steel needs to be cold worked to generate higher tensile strength. Type 304 has slightly lower strength than 302 due to its lower carbon content. Stainless Steel 304 Pipes and Tubes Available are following Specification, Grades and Size.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

Coiled tubing makes long length tube installations possible without the need for joining fittings. This reduces installation time and costs as well as eliminates potential leak points. We stock both seamless and welded tube coils to meet the needs of petrochemical, compressed natural gas (CNG), geothermal, and flow measurement applications. Coiled tubing can be provided in long mill lengths that stretch over a mile, or in custom cut-to-length sections as short as fifty feet.

Stainless Steel pipe and tube is available in many different grades and finishes. The most common grades are type 304/304L and type 316/316L. Some of the more exotic grades are type 304H, type 309 and 309H, type 310 and 310H, type 317, type 321 and type 347. And Duplex Stainless grades are type 2205 and 2507
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

SS 304 Tubes offers some highest putrefaction deviation to a great deal of industrial milieu and chemical corrodents. Meanwhile, our Stainless Steel Cold Drawn 304 Tubes have an amazingly improved formability and can be welded all the way through high-quality refinement by all standard ways
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

The ASTM A312 TP304 Pipe is used for high pressure and high temperature applications because of the high operating temperature of 870 degrees Celsius and the strength. The minimum yield strength of the SS UNS S30400 ERW Pipe is 205MPa and the minimum tensile strength is 515MPa. The applications include commercial, industrial, domestic and general corrosive services. The ASME SA312 Grade 304 Welded Pipe is one of the most cost effective stainless steel pipes in the market.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

Stainless steel pipe is ideal for all structural applications where greater strength and superior corrosion resistance is required. stainless Pipe is widely used for all types of fabrication projects that are exposed to the elements – chemical, acidic, fresh water,high temperature and salt water environments.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

When corrosion resistance is important, stainless steel is an excellent material choice. We offer commercial stainless steel tube and pipe in both welded and seamless, hollow bar, stainless ornamental tubing, stainless steel pipe, Nickel tubing, Nickel pipe. Our most popular offerings are the austenitic grades of 304, 304/L, 316, and 316/L other grades such as 309, 310, 317L, 321, 347, Alloy 200, 400, 600, 800 are available upon request. Material is available in several conditions, including annealed and pickled, bright annealed, mill finished, and polished.

Greater strength and corrosion resistance still mandate the use of seamless stainless steel and nickel alloy tubing for high pressure applications within the oil and gas, petrochemical, chemical, energy, and pulp and paper industries.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

Stainless steel pipe is used for structural and piping applications that require the properties that stainless steel delivers ¨C high strength, toughness and excellent corrosion resistance. The pipe is available in sizes 1/2″ through 36″ in outside diameter and schedules 05S through 80S and larger for wall thickness. It is available as welded and seamless. Stainless pipe has a dull gray, mill finish.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

The ASTM A554 TP304 tube has certain level of corrosion resistance with good strength. The cost effectiveness of the alloy 304 tubemake it adopted over a wide range of applications. The ASTM A270 TP304 tube has chromium and nickel components in the composition and it comes in different types such as the SS 304 seamless tubing and the electric resistance welded tubing.

Stainless steel 201 belongs to an austenitic grade of steel. The 201 Stainless Steel Pipe is designed with a superior composition of chromium, iron, manganese, nickel, silicon, nitrogen, and carbon. This gives the non-magnetic grade superior resistance to corrosion across stress-induced systems. 201 SS Pipe has a density of 7.86 g/cm3 and works well in low and high temperature setups.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

Stainless steel alloys offer greater cryogenic toughness, a higher work hardening rate, increased strength and hardness, greater ductility
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

Stainless Steel 304 Pipe is a metallic pipe made up of an austenitic stainless steel that has 18% chromium and 8% nickel in the composition. . The specifications for the pipes range as A312 and A358 in the ASTM specifications. The dimensions range according to the ASTM, ASME and API standards. There are welded and SS 304 Pipe as well as electric fusion welded pipes
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

Using a welded tube is typically a more cost-effective option for use in low pressure, ornamental, and structural applications. Some welded sizes come pre-polished to a 180 grit (similar to a #4), but we can have all tubing custom polished per your specifications. The seamless tube should be used in high-pressure applications.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

Bright Annealed (BA) is produced by heat-treating (annealing) steel with a controlled atmosphere furnace. After heat-treatment, the steel has a reflective, mirror-like appearance, but may also have some imperfections and cloudiness. BA stainless steel can be buffed to attain a more reflective finish, and is often specified for applications where a highly reflective surface is desired.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

Welded tubing is produced by rolling strips of stainless steel into a tube and then welding along its full length. After welding, the weld seam, or bead, can be refined by cold rolling and forging methods or left as is.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

Greater strength and corrosion resistance still mandate the use of seamless stainless steel and nickel alloy tubing for high pressure applications within the oil and gas, petrochemical, chemical, energy, and pulp and paper industries.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

Stainless steel tubing is our specialty at Stainless Tubular Products Inc. We maintain one of the nation’s largest and most diversified inventories of stainless steel tubing, including round, square and rectangular models. Our ornamental tubing is available in a variety of sizes and can be cut and polished to your specifications.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

Type 316 stainless steel tubing is similar to 304, but with the addition of molybdenum, which improves the alloys corrosion resistance. The austenitic structure allows excellent toughness, even down to extremely low temperatures. These grades have excellent weldability, with or without the addition of filler metal.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

Stainless steel sanitary tube is polished on the outside and inside to the highest quality standards. Our 20 lengths of polished OD/ID tube meets ASTM A270 and 3A sanitary standards. Sanitary tube, sanitary fittings, sanitary valves and other products are manufactured for the food and beverage, pharmaceutical and biotechnology industries. Our products are engineered to decrease entrapment areas where bacteria can form and dock. Clamp-style sanitary fittings, are designed to be broken down, cleaned and reassembled for the optimal sanitary product line.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

We stock an extensive inventory of high-quality standard and special grade of seamless stainless steel tube and welded stainless steel tubing.

Stainless steel pipe has many remarkable attributes including corrosion resistance, high strength, durability, and machinability. Federal Steel stocks stainless steel piping in outer diameters (OD) of ?¡± ¨C 48¡±. In our stainless steel product line, our seamless steel pipe and welded pipe are available in wall thickness up through 1.500¡±.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

Stainless steel is a versatile material comprised of a steel alloy and a small percentage of chromium the addition of chromium adds to the material s corrosion resistance, a trait that earned stainless steel its name
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

Chromium oxide is created when chromium and steel react, which gives the corrosion resistant properties to stainless steel. This is one of the reasons stainless steel is great for sanitary valves and other sanitary items, because it does not corrode.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

Because stainless steel is also low-maintenance, oxidation resistant, and doesn t affect other metals it comes in contact with, it is frequently used in a large array of applications, especially in piping, tubing, and fittings manufacturing.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

Stainless steel is an iron alloy that contains a minimum of 10.5% chromium. Alloying elements such as nickel, molybdenum, titanium, carbon, nitrogen, and copper can boost the strength, formability, and other properties of stainless steel. Different alloys offer different levels of corrosion resistance.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

seamless stainless steel tube meets ASTM A269 and ASTM A511 standard specificatins. Seamless stainless tube provides a high level of strength and corrosion resistance for applications in harsh industrial environments whether hot or cold. We provide additional custom services such as tube cutting and tube polishing services to meet your specifications. Stainless Steel Seamless TubeStainless Steel Seamless Tube
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

Tube include single-phase austenitic and dual-phase duplex grades. Stainless steel is often chosen for projects in oil and gas production, piping systems, medical devices, food and beverage production, structural applications and corrosion-resistant vessels.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20