The exhibition of Zhengzhou Huitong Inconel 718 SO flanges

Inconel 718 is a nickel-chromium-based alloy that is commonly used in high-temperature applications such as aerospace and gas turbines. One of the most important factors in the production of ASTM B670 Inconel 718 Sheet is the plate rolling process. There are two main types of Inconel 718 plates available on the market: hot rolled and cold rolled plates.

Inconel 625 Coil is characterized by its excellent resistance to oxidation, high-temperature corrosion and fatigue. ASTM B443 UNS N06625 Inconel Plate is widely used in the aerospace, chemical processing and oil and gas industries due to its superior strength, toughness and durability even in extreme environments.

Inconel 600 seamless tubes of standard UNS N06600 and ASTM B167 are the ones manufactured to sustain excessively high pressure and come with great warranty.

Inconel 600 round bar is a nickel-based alloy with benign carburization and excellent corrosion resistance at high temperatures. Inconel 600 round bars are effective against drying Cl2 and many other different gases at mild and high temperatures. Alloy 600 bar is a nickel-chromium alloy with good oxidation resistance and resistance to chloride pressure decomposition cracking, high cleanliness water corrosion and acid oxidation at elevated temperatures.

For shielded metal – arc welding, these Inconel 625 Socket Weld Flanges has excellent operability. Post-weld heat treatment of Inconel 625 Weld Neck Flanges is not necessary to maintain corrosion resistance. Due to ability of Inconel 625 fasteners to prevent, stress, crevice and pitting corrosion, it is utilized in a diversity of corrosive environments. In mild applications such as atmosphere, fresh or salt water, neutral salts and alkaline media is is almost completely resistant. In more severe situations the nickel and chromium content provides resistance to oxidizing chemicals.

Inconel 718 is a precipitation hardening nickel-chromium based superalloy. ASTM B637 UNS N07718 round bars also contain significant amounts of elements such as iron, niobium and molybdenum, and trace amounts of metals such as aluminum and titanium. Aluminum and titanium make Inconel 718 hardenable.

As they are workable at reducing and oxidizing temperatures, our ASTM B564 Inconel 625 Raised Face Flanges are non-permeable, have a high strength and excellent machinability and resist sulfur compounds in the sour service sector. Our DIN 2.4856 Inconel 625 Welded Flanges are impervious to seawater and crevice corrosion and have excellent welding and forming abilities. The properties of Incoloy 625 Forged Flanges which makes them an excellent or ideal choice for sea-water applications includes the facts that the alloy is free from local attack such as pitting and crevice corrosion, it has a high corrosion-fatigue strength, high tensile strength, as well as its good resistance to chloride-ion stress related corrosion cracking.

Its outstanding strength and toughness in temperature ranges from cryogenic temperatures to high temperature up to 2000¡ã F (1093¡ã C) are derived primarily from the solid solution effects of the refractory metals Columbium and molybdenum in a nickel-chromium matrix.

Inconel 625 Bolts are easy to weld using conventional welding processes, which is especially useful for Inconel 625 Weld Studs. This alloy is often chosen for its weldability compared to other highly alloyed nickel-based alloys. Alloy 625 resists intergranular corrosion even in the as-welded condition. Furthermore, post-weld heat treatment of the weld is not necessary to maintain corrosion resistance.

Nuclear systems also generally involve high temperatures beyond 650¡ãC, in which the strength of Inconel 625 elbow can withstand.

Inconel is a superalloy made of high concentrations of nickel, chromium and molybdenum. Inconel 625 is highly resistant to corrosive and oxidizing media in a variety of environments. These alloys have excellent ductility and excellent formability. They can be welded easily and are resistant to post-weld carburization or graining.

The Inconel 600 Seamless Pipes have many features like good workability, durability, readily weldable, high strength and mechanical property as well. There are various types of Inconel 600 pipes are available such as welded, seamless, square, rectangular, thick wall, thin wall, electro polished, etc.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

Inconel bolts, like Inconel 600, 601,625,686,718 & 725 bolts, are a family of nickel-chromium-molybdenum alloys used for their high strength at elevated temperatures and good corrosion resistance. Because of its high thermal stability, Inconel can be used in service temperatures ranging from cryogenic to 2200¡ãF (982¡ãC). The high alloy content of Inconel bolts enable it to withstand a wide variety of severe corrosive environments.

Alloy 600 is not an age hardening alloy; cold working is the only hardening method available.

In pressurized water reactors it is used for control rod guide tubes and steam generator baffle plates etc. Furnace retort seals, fans and fixtures.

Inconel 600 exhibits cold forming characteristics normally associated with chromium-nickel stainless steels.

Inconel X750 is an alloy that has a high resistance to corrosion and oxidation. Inconel X750 also resistant to creep deformation, which makes it suitable for use in high-temperature environments where other alloys would deform over time.

Alloy 600 (UNS N06600) is a nickel-based alloy with excellent carburization and good oxidation resistance at elevated temperatures. This alloy has long been used in the heat treatment industry for the same applications as RA330. Alloy 600 has useful resistance to dry Cl2 and HCl gases at moderately elevated temperatures. Due to the elevated nickel content, alloy 600 is not recommended for use in red hot conditions when sulfur is present.

Inconel 625 round bars are also used in nuclear reactors, combustion systems, rocket thrust chamber tubes, transition liners, compressor blades, turbine seals, and more. It has excellent formability and solderability due to its high nickel content. 625 Round Bar has excellent resistance to a variety of acidic environments such as nitric, sulfuric, hydrochloric and phosphoric environments. In addition, they provide protective properties, surrounded by alkali metals.

Inconel 600 fittings are made from a nickel-chromium alloy that contains a minimum of 72% nickel and 14% chromium in a composition with carbon, manganese, silicon, sulfur, copper and iron.

Inconel 718 fasteners are ideal for extreme environments where oxidation and corrosion resistant bolts are required, even when subjected to pressure and heat.

Alloy 625 is a popular nickel-chromium alloy that offers users a high level of strength and ease of fabrication.

Inconel 625 Bolts were developed in the 1960s as a vapor-lined piping material to provide high strength even in extreme high temperatures ranging from freezing low temperatures to 1800¡ãF. Inconel 625 Bolts, also known as Alloy 625, are known for their amazing ability to maintain strength and heat resistance in and out of corrosive environments.

Stress-relieving is performed after cold working to reduce residual stress and prevent distortion. Annealing is performed at 1700¡ãF – 1900¡ãF (927¡ãC – 1038¡ãC) to restore full softness.

Alloy 625 (UNS N06625) is a nickel-chromium alloy that is hardened by the addition of molybdenum and niobium, so the alloy does not need to be aged. It has excellent resistance to various corrosive environments and the high temperature effects of oxidation and carburization.

ASTM B564 UNS N02200 Flange The Nickel alloy 200 has some excellent properties, which have made it quite famous in various industries. The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment. We are a specialized Nickel 200 Flange Manufacturer In China who produces the flanges of the given grade in different shapes and sizes, according to the dimensional requirements of the client. Our experienced team of professionals supervises the process of manufacturing Nickel 200 Slip On Flanges to ensure they have the correct dimensional accuracy and quality. They also conduct certification tests to ensure the product’s condition before delivering it to the customers.

Nickel Alloy 600 works well with most alkaline solutions and sulfur compounds and also provides lower rate of attack from chlorine or hydrogen chloride.

The results reveal that Inconel 625 is excellent in resist the corrosion attack in seawater. However, at increasing temperature, the corrosion resistance of this metal decrease.

The Inconel 625 is highly resistant against corrosion and oxidations mediums in various environments.

Alloy 718, commonly referred to as Inconel 718, is precipitation hardened to provide maximum strength and high creep stress rupture strength. Alloys can be supplied in the annealed condition to improve machinability, followed by appropriate heat treatment.

Similar to other Inconel alloy grades, the base element of alloy Inconel 625 spring steel bars is nickel. UNS N06625 / W.Nr. 2.4856, also known as Nickel Alloy 625 Hot rolled bar is an alloy of nickel and chromium with the addition of molybdenum and niobium.

The sizes range from 1/2 inches to 60 inches depending on the type of the flanges.

Because of its versatility, and because it is the standard engineering material for applications which require resistance to corrosion and heat, a number of different critical industries use Nickel Alloy 600 in their applications. It is an superior choice for Nuclear reactor vessels and heat exchanger tubing and Chemical processing equipment. Alloy 600 can be provided in the lower strength, annealed condition, or strengthened through the pilger process.

They have a minimum tensile strength of 120Ksi and minimum yield strength of 60ksi.