The exhibition of Zhengzhou Huitong nickel alloy inconel 600 601 718 625 pipe fittngs

Inconel 625 Coil is characterized by its excellent resistance to oxidation, high-temperature corrosion and fatigue. ASTM B443 UNS N06625 Inconel Plate is widely used in the aerospace, chemical processing and oil and gas industries due to its superior strength, toughness and durability even in extreme environments.

Inconel 718 is a nickel-chromium-based alloy that is commonly used in high-temperature applications such as aerospace and gas turbines. One of the most important factors in the production of ASTM B670 Inconel 718 Sheet is the plate rolling process. There are two main types of Inconel 718 plates available on the market: hot rolled and cold rolled plates.

Inconel 600 seamless tubes of standard UNS N06600 and ASTM B167 are the ones manufactured to sustain excessively high pressure and come with great warranty.

Inconel 600 round bar is a nickel-based alloy with benign carburization and excellent corrosion resistance at high temperatures. Inconel 600 round bars are effective against drying Cl2 and many other different gases at mild and high temperatures. Alloy 600 bar is a nickel-chromium alloy with good oxidation resistance and resistance to chloride pressure decomposition cracking, high cleanliness water corrosion and acid oxidation at elevated temperatures.

Typical corrosion applications include titanium dioxide production (chloride route), perchlorethylene syntheses, vinyl chloride monomer (VCM), and magnesium chloride.

The face type of the flanges vary as flat face, raised face and ring type joint. The sizes of the flanges range from ? inches to 48 inches and the pressure ALLOY 600 is a heat resistant alloy on account of its excellent resistance above 550 C (1022 F) against hot gases and combustion products, as well as against molten salt and molten metal corrosion, while at the same time exhibiting good mechanical short-time and long-term properties. vary.

The added titanium, with proper heat treatment, stabilizes the susceptibility of Inconel plate flanges to intergranular corrosion. With an unwavering commitment to quality, we offer our customers a wide variety of Inconel Butt Weld Neck Raised Face Flanges.

Alloy 600 is an superior choice for Nuclear reactor vessels and heat exchanger tubing, Chemical processing equipment, Heat treat furnace components and fixtures, Gas turbine components including jet engines and Electronic parts.

ASME SB564 Alloy 601 weld neck flanges nconel 601 is a nickel-chromium alloy used for applications that require resistance to corrosion and heat. This nickel alloy stands out due to its resistance to high temperature oxidation, remaining highly resistant to oxidation through 2200¡ã F. Alloy 601 develops a tightly adherent oxide scale which resists spalling even under conditions of severe thermal cycling.

ASTM B564 Inconel 625 Flange Alloy 625,inconel 625 flange,UNS N06625 Flange is a nickel-chromium-molybdenum alloy that is used for its high strength, high toughness and excellent corrosion resistance. The strength of alloy 625,UNS N06625 is derived from the stiffening effect of molybdenum and niobium on its nickel-chromium matrix. Although the alloy was developed for high temperature strength, its highly alloyed composition also provides a significant level of general corrosion resistance.

For high temperature applications up to 1,000 ¡ãC (1,832 ¡ãF), the solution treated variant (grade 2) acc. to ASME Code for Pressure Vessels is used.

The Inconel 625 material used in producing the products in this grade possesses superior strength and hardness.

Applications for Inconel 600 Nuts and Bolts can be found in general engineering applications, oil and gas industry applications, aerospace, marine, construction, power generation, and more.

Inconel fasteners, such as Inconel 600, 601, 625, 686, 718, 725 and X750 fasteners, are a family of nickel-chromium-molybdenum alloys for high strength and good corrosion resistance at elevated temperatures.

Inconel X750 is a superalloy that has excellent properties enabling it to exhibit high strength at high temperatures, excellent corrosion resistance, and good oxidation resistance up to 1300¨H.

The nickel content gives it excellent resistance to chloride-ion stress-corrosion cracking and also provides excellent resistance to alkaline solutions.

Alloy 600 is a nickel-chromium-iron alloy characterized by: good mechanical properties at low, room and high temperature, very good resistance to stress corrosion cracking, even at high temperature, high temperature corrosion resistance to dry chlorine and hydrogen chloride Good resistance and good resistance to oxidation, carburization and nitriding.

ASTM B564 Nickel Alloy 200 Threaded Flanges The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment.

Inconel 601 flanges are made of nichrome. Its material grade varies with the composition ratio. The composition of grade 601 is 58% nickel, 21% chromium, carbon, manganese, silicon, sulfur, copper and iron. And it has different types such as socket welding flange, butt welding flange, Inconel 601 sliding flange, orifice flange and so on. Flanges made of this material are strong, resistant to acids, reducing agents and oxidation, and are harder to resist corrosion in many harsh environments.

Alloy 718 is a precipitation hardenable nickel-based alloy designed to exhibit extremely high yield, tensile and creep rupture properties at temperatures up to 1300°F.

There are different functional types such as the ASME SB564 Alloy 601 Lap Joint Flange, slip on flanges, weld neck flanges, socket weld flanges and orifice flanges. The face type of the flanges vary as flat face, raised face and ring type joint.

It is used in high stress applications at elevated temperatures. The Inconel 625 Tube can be used in heat exchangers, condensers and in boiler components for this reason.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

Solid solution treatment: fully dissolve various phases in the alloy, strengthen the solid solution, improve toughness and corrosion resistance, eliminate stress and soften, so as to continue processing and forming.

Since the Inconel 600 Lap Joint Flange is applied in industries which require frequent dismantling and is considered to be useful for large or hard-to-adjust flanges, they are well suited for use in Nuclear Engineering, airspace as well as a part of Gas turbine components.

Alloy 600 / Inconel 600 is a combination of nickel chromium and iron that provides the standard material for the chemical industry and the automotive engine, aero engine and airframe sectors. Controlled chemical composition is restricted for use in the nuclear industry to eliminate the risk of stress corrosion cracking in high-purity water containing chloride ions.

Inconel Alloy 600 Pipes has a larger pressure fast resistance in condensation group nuclear devices for piping, centrifuges and weldments.

Inconel 718 is a precipitation hardening nickel-chromium alloy containing large amounts of iron, niobium and molybdenum, and small amounts of aluminum and titanium. 718 material maintains high strength and good ductility at temperatures up to 1300¡ãF (704¡ãC).

The Nickel Alloy 718 Cold Finished Bar is formed after the hot-rolling process comes to an end.

Incoloy 800, also known as Alloy 800 or UNS N08800, is an iron-nickel-chromium alloy with good creep & stress-rupture strength and excellent resistance to oxidation, sulfurization and carburization in high-temperature services. It also resists corrosion by many aqueous

The production of flanges is also done by using the latest technology and modern equipment because of which no doubt greater superiority in product quality is added.

Inconel alloy 718 hexagon bolts have good comprehensive performance in the temperature range of -253 ~ 700 ¡æ. The yield strength below 650¡ãC ranks first in the deformed superalloy, and has good fatigue resistance, radiation resistance, oxidation resistance and corrosion resistance, good processing performance, and good welding performance.

Inconel 625 round bars can be manufactured in hot-worked bar form per ASTM B446 specification. These properties specified by ASTM B446 for 2.4856 Inconel 625 hexagonal bar include the tensile strength, yield strength and elongation properties of the material.

The chromium content of this alloy results in superior resistance to oxidizing environments. The high molybdenum content makes alloy 625 very resistant to pitting and crevice corrosion.

These Hastelloy B2 are a solid solution strengthened nickel-molybdenum alloy with significant resistance to reducing environments such as hydrogen chloride gas, sulfuric acid, acetic acid and phosphoric acid. Molybdenum is a major alloying element that provides significant corrosion resistance in reducing environments.