The exhibition of Zhengzhou Huitong SW flanges

Inconel 600 seamless tubes of standard UNS N06600 and ASTM B167 are the ones manufactured to sustain excessively high pressure and come with great warranty.

Inconel 718 is a nickel-chromium-based alloy that is commonly used in high-temperature applications such as aerospace and gas turbines. One of the most important factors in the production of ASTM B670 Inconel 718 Sheet is the plate rolling process. There are two main types of Inconel 718 plates available on the market: hot rolled and cold rolled plates.

Inconel 625 Coil is characterized by its excellent resistance to oxidation, high-temperature corrosion and fatigue. ASTM B443 UNS N06625 Inconel Plate is widely used in the aerospace, chemical processing and oil and gas industries due to its superior strength, toughness and durability even in extreme environments.

Inconel 600 round bar is a nickel-based alloy with benign carburization and excellent corrosion resistance at high temperatures. Inconel 600 round bars are effective against drying Cl2 and many other different gases at mild and high temperatures. Alloy 600 bar is a nickel-chromium alloy with good oxidation resistance and resistance to chloride pressure decomposition cracking, high cleanliness water corrosion and acid oxidation at elevated temperatures.

All our Inconel 600 Flanges conform to relevant material and dimensional specifications and can be supplied complete with material certificates to EN 10204 3.1.

Alloy 600 reducer is a blend of Nickel Chromium and Iron that provides a standard material for chemical manufacturing and the automotive machine, airframe and aircraft engine segments.

The material has high corrosion resistance and high strength. The minimum tensile strength is 185ksi, the minimum yield strength is 150ksi, and the elongation is 12%. ASTM B637 UNS N07718 Nuts are also available in 331BHN or equivalent.

Solid solution treatment: fully dissolve various phases in the alloy, strengthen the solid solution, improve toughness and corrosion resistance, eliminate stress and soften, so as to continue processing and forming.

Inconel UNS N06601 LWN Flanges nconel 601 is a nickel-chromium alloy used for applications that require resistance to corrosion and heat. This nickel alloy stands out due to its resistance to high temperature oxidation, remaining highly resistant to oxidation through 2200¡ã F. Alloy 601 develops a tightly adherent oxide scale which resists spalling even under conditions of severe thermal cycling.

ASTM B637 UNS N07718 bolts are the trade name for Alloy 718, used primarily in the natural gas processing and nuclear industries.

In addition to basic alloys, our flanges are available in titanium, aluminum, cobalt, boron, copper, iron and other metals. Inconel 718 flanges offer uncompromising protection against oxidation and corrosion factors.

Inconel 718 elbows are commonly used in gas turbine engine parts, wellhead completions and blowout preventers (BOPs).

Inconel 718 tubing and other nickel-based alloys are ideal for the cost-effective manufacture of pumps, valves and process control equipment in oil and gas extraction.

ASTM B564 UNS N02200 Flange The Nickel alloy 200 has some excellent properties, which have made it quite famous in various industries. The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment. We are a specialized Nickel 200 Flange Manufacturer In China who produces the flanges of the given grade in different shapes and sizes, according to the dimensional requirements of the client. Our experienced team of professionals supervises the process of manufacturing Nickel 200 Slip On Flanges to ensure they have the correct dimensional accuracy and quality. They also conduct certification tests to ensure the product’s condition before delivering it to the customers.

The high alloy content of Inconel flanges enables them to withstand a wide range of severe corrosive environments. There is almost no corrosion to Inconel flanges in mild environments such as atmosphere, seawater, neutral salt, and alkaline media.

Post-weld heat treatment of Inconel 625 Weld Neck Flanges is not necessary to maintain corrosion resistance. In order to restore the best balance of properties, all hot or cold worked parts of these Inconel 625 Threaded Flanges should be annealed and rapidly cooled. In more severe situations the nickel and chromium content provides resistance to oxidizing chemicals. Inconel 625 (2.4856) fasteners and flanges are also resistant to nonoxidizing environments. Better understand Inconel 625’s corrosion resistance to:
Sulfuric Acid
Hydrochloric Acid
Phosphoric Acid

Typical applications of 625 alloy include thermal shielding hardware, pipes for furnaces, gas turbine engines, combustion liners and spray rods, chemical plant hardware, and special seawater applications.

The alloy has excellent high-temperature oxidation resistance, good high-temperature mechanical properties and corrosion resistance, and is easy to form,

Inconel 601 fasteners can be made into all types of bolts, screws, studs, studs, nuts, washers, dowels and other standardized and custom bolt assemblies.

Alloy 718, commonly referred to as Inconel 718, is precipitation hardened to provide maximum strength and high creep stress rupture strength. Alloys can be supplied in the annealed condition to improve machinability, followed by appropriate heat treatment.

Inconel 718 Welded Pipe is a nickel-chromium-molybdenum alloy designed to resist a variety of severe corrosive environments, pitting and crevice corrosion. Inconel 718 EFW pipe is a nickel-chromium alloy that is precipitation hardenable with high creep rupture strength at elevated temperatures up to approximately 1300 degrees Fahrenheit (700 degrees Celsius). Inconel 718 ERW tube has excellent mechanical properties at high and low temperatures.

INCONEL alloy 625 is designated as UNS N06625, Werkstoff Number 2.4856 and ISO NW6625 and is listed in NACE MR-01- 75.

These alloys can suffice in high pressures and extreme temperatures.

Some applications suitable for Inconel 625 include seawater, aerospace and chemical processing. About Seawater Inconel 625 is a common choice due to its excellent corrosion resistance, fatigue strength and high tensile strength. Not to mention its strong resistance to chloride ion stress corrosion cracking. Propeller blades, subsea motors, and subsea cable sheathing are good applications for Inconel 625, where the bar becomes wire once it passes through a certain minimum diameter, in which case the wire can be used for mooring cables.

B564 601 Spade Flange Inconel 601 is a nickel-chromium alloy used for applications that require resistance to corrosion and heat. This nickel alloy stands out due to its resistance to high temperature oxidation, remaining highly resistant to oxidation through 2200¡ã F. Alloy 601 develops a tightly adherent oxide scale which resists spalling even under conditions of severe thermal cycling.

Inconel UNS N07718 sheet is resistant to oxidation over its service temperature range. The slow precipitation hardening reaction of Inconel Din 2.4668 sheet makes it easy to weld without hardening or cracking.

Inconel 600 bolts are optimized for the harshest service conditions in manufacturing.

Compared to Alloy 718, Alloy 625 has higher corrosion resistance in high temperature environments.

They have a minimum tensile strength of 120Ksi and minimum yield strength of 60ksi.

Inconel 625 round bar is a nickel-chromium-molybdenum-based alloy. This makes it very good at resisting non-oxidizing environments. They are widely used in the manufacturing sector of the economy.

Inconel 625 is an austenitic nickel-based superalloy. High levels of molybdenum and niobium strengthen the chrome-nickel matrix of alloy 625 screws. Inconel 625 Bolts are fasteners made from a nickel-based alloy containing chromium and molybdenum, with additions of aluminum and titanium.

Inconel 601 flanges are made of nichrome. Its material grade varies with the composition ratio. The composition of grade 601 is 58% nickel, 21% chromium, carbon, manganese, silicon, sulfur, copper and iron. And it has different types such as socket welding flange, butt welding flange, Inconel 601 sliding flange, orifice flange and so on. Flanges made of this material are strong, resistant to acids, reducing agents and oxidation, and are harder to resist corrosion in many harsh environments.

Inconel 600 Flanges are made up of a type of nickel chromium alloy. There are different grades of nickel chromium alloys each differ with the chemical compositions.

Inconel 601 Flat Washers are a family of nickel-chromium-molybdenum alloys for high strength and good corrosion resistance at elevated temperatures. The high alloy content of Inconel 601 Punch Washers enables them to withstand a wide range of severe corrosive environments. Inconel 601 machined washers are commonly used in industrial applications that require very strong components, including power and utility equipment, petrochemical, and oil and gas processing machinery. Inconel 601 round washers are used in high temperature applications to compensate for loosening of threaded connections or to maintain sealing effects, such as pipe connections in chemical or steel mills, heat exchangers, boilers, rolling mills, etc.