titanium pipe fittings elbow glossy grey metal

Nickel based 800 Incoloy Hexagonal Pipe is known to have a good resistance to corrosion. Specifically speaking, the Incoloy 800 Pipe offers sufficient resistance against both carburization as well as oxidation corrosion.

It demonstrates good resistance to neutral and reducing environments. This alloy creates a tenacious oxide, protective film that does not spall off, but it retains superior oxidation resistance at soaring temperatures.

Inconel 625 Coil is characterized by its excellent resistance to oxidation, high-temperature corrosion and fatigue. ASTM B443 UNS N06625 Inconel Plate is widely used in the aerospace, chemical processing and oil and gas industries due to its superior strength, toughness and durability even in extreme environments.

Nickel Alloy 400 and Monel 400, also known as UNS N04400, is a ductile nickel-copper-based alloy consisting primarily of two-thirds nickel and one-third copper. Nickel Alloy 400 is known for its resistance to a variety of corrosive conditions, including alkalis (or acids), salt water, hydrofluoric acid, and sulfuric acid. Since Monel 400 or Alloy 400 is a cold worked metal, this alloy has high hardness, stiffness and strength. By cold working ASTM B164 UNS N04400 bar stock, the alloy is subjected to higher levels of mechanical stress, which in turn causes changes in the alloy’s microstructure.

Hastelloy C2000 is available in a variety of sizes and thicknesses, this type of nickel-chromium-molybdenum alloy is renowned for its superior strength and corrosion resistance.

Higher chromium, molybdenum and nitrogen content results in a Pitting Resistance Equivalent Number (PREN) > 40, providing superior pitting and crevice corrosion capabilities to austenitic and duplex stainless steels in virtually all corrosive media, and critical pitting temperature Above 50¡ãC .

The pipes of seamless configurations have higher load-bearing capacity and strength over other grades.

Nilo Alloy 36, W.Nr 1.3912, Invar 36® is a nickel-iron, low controlled expansion alloy that contains 36% nickel and possesses a rate of thermal expansion approximately one-tenth that of carbon steel.
Invar 36 Specifications: UNS K93600, W.Nr 1.3912

AL6XN is a superaustenitic stainless steel with outstanding resistance to chloride pitting, crevice corrosion and stress corrosion cracking. AL6XN is a 6 moly alloy that was developed for and is used in highly aggressive environments. It has high nickel (24%), molybdenum (6.3%), nitrogen and chromium contents that give it excellent resistance to chloride stress corrosion cracking, chloride pitting, and exceptional general corrosion resistance. AL6XN is primarily used for its improved pitting and crevice corrosion resistance in chlorides. It is a formable and weldable stainless steel.

Nickel-copper-based alloy 400 Monel 2.4360 cold drawn rod is virtually immune to chloride stress-related corrosion cracking when exposed to corrosive media in typical environments. Monel 400 is a copper and nickel based alloy that is popular today due to its high performance. The alloy has excellent acid and alkali resistance. In addition, it has good tensile strength, ductility, excellent thermal conductivity, and can be hardened by cold work. Additionally, it can be used in applications with temperatures ranging from minus to 538 degrees Celsius.

It is able to withstand a wide range of oxidizing and non-oxidizing chemicals, and exhibits outstanding resistance to pitting and crevice attack in the presence of chlorides and other halides.

ASTM A312 TP316 is a standard specification for seamless, straight-seam welded, and heavily cold worked welded austenitic stainless steel pipes used in high-temperature and general corrosive service applications. The 316 Seamless Industrial Steel Pipe is made from a combination of chromium, nickel, and molybdenum, which gives SS 316 Seamless Tube excellent resistance to corrosion and rust.

It is widely used in offshore oil and gas exploration/production and in heat exchangers in petrochemical/chemical processing.

SCH40 Monel 400 Pipe is designated as Werkstoff Number 2.4360 and UNS N04400. Alloy 400 Pipe also known as Monel Alloy 400 Pipe, Monel 400 Pipe & Nickel Alloy 400 Pipe.

Nickel 200 flanges The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment.

Alloy 800 is a nickel-iron-chromium alloy with high strength and excellent resistance to oxidation and corrosion at high temperatures. ASTM B407 UNS N08800 Incoloy 800 W. Nr. 1.4876 Welded Pipe is widely used for construction of equipment requiring corrosion resistance, heat resistance, strength, and stability for service up to 1500°F (816°C).

UNS N08367 also commonly referred to as alloy AL6XN is a low carbon, high purity, nitrogen-bearing “super-austenitic” nickel-molybdenum alloy with excellent resistance to chloride pitting and crevice corrosion.

316L 1.4401 S31603 Stainless Steel Pipe is a highly versatile and durable pipe option commonly used in a wide range of industrial and commercial applications. This SS UNS S31603 pipe is made from high quality 316L stainless steel with excellent resistance to corrosion, oxidation and staining, making it ideal for harsh environments or high stress applications.

Inconel 600 seamless tubes of standard UNS N06600 and ASTM B167 are the ones manufactured to sustain excessively high pressure and come with great warranty.

Titanium’s density is about 60% that of stainless steel and nickel alloys, this weight saving makes it a popular choice in applications where this is critical such as aerospace.

A789 UNS S31803 and UNS S32205 are two grades of duplex stainless steel that are widely used in various industrial applications. These Duplex S31803 Seamless Pipes are known for their excellent corrosion resistance, high strength, and good weldability. A789 is a specification that covers seamless and welded tubes made from duplex stainless steel.

This provides greatly enhanced resistance to sulfuric acid. It also has a high chromium content, to maximize its resistance to oxidizing chemicals and process streams contaminated with ferric ions and dissolved oxygen.

ASTM A240 Type 2205 Plate is a duplex stainless steel plate that is used extensively in various industries such as chemical processing, oil and gas exploration, and marine engineering. SA 240 GR 2205 Sheet is made from grade 2205 stainless steel, which is a combination of ferritic and austenitic steel.

Inconel 718 is a nickel-chromium-based alloy that is commonly used in high-temperature applications such as aerospace and gas turbines. One of the most important factors in the production of ASTM B670 Inconel 718 Sheet is the plate rolling process. There are two main types of Inconel 718 plates available on the market: hot rolled and cold rolled plates.

The 316 stainless steel pipe has become an indispensable material for the industrial sector. This alloy of iron and chrome is recognized for its high resistance to corrosion, as well as its durability. 316 stainless steel tubing can be produced in both seamless and welded tubes to meet specific customer needs.

Inconel 600 round bar is a nickel-based alloy with benign carburization and excellent corrosion resistance at high temperatures. Inconel 600 round bars are effective against drying Cl2 and many other different gases at mild and high temperatures. Alloy 600 bar is a nickel-chromium alloy with good oxidation resistance and resistance to chloride pressure decomposition cracking, high cleanliness water corrosion and acid oxidation at elevated temperatures.

Common Trade Names: Nickel Alloy 36, Invar 36®, Nilo 6®, Pernifer 6®
Invar 36® is a nickel-iron, low expansion alloy that contains 36% nickel, Invar 36 has a low coefficient of expansion from cryogenic temperatures to about +500°F (260°C).
Invar 36 Tube OD:0.2-6mm, WT: 0.02-2mm

Nilo / Alloy K W.Nr.: 1.3981
UNS: K94610 ASTM F15
Fixed-expansion glass-encapsulated iron-nickel-cobalt alloys, Kovar alloys, have a linear thermal expansion coefficient similar to that of hard glass within a certain temperature range
For mating sealing with hard glass

Incoloy 800H Flange We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

Hastelloy C2000 Tubes are used in a broad range of industries including petrochemical processing, chemical processing equipment manufacturing, oil refineries and power plants.

A105 pipe flange connects piping and components in a piping system by use of bolted connections and gaskets. Most commonly used flanges are weld neck flange, slip on flange, blind flange, socket weld flange, threaded flange and lap joint flange (RTJ Flange). This type of connection in a pipe flange allows for ease of disassembly and separation for repair and regular maintenance. Most common specification for carbon steel and stainless steel flange is ANSI B16.5 / ASME B16.5.

N04400 Butt Weld Pipe Fittings has resistance to chloride induced stress corrosion cracking. Also referred as WNR 2.4360 Butt Weld Pipe Fittings, it has excellent mechanical properties from sub-zero temperatures up to 1020¡ã F. Alloy 400 Pipe Fittings are available in different types such as Elbow, Bends, Equal & Unequal (reducing) Tees, Equal & Unequal (reducing) Cross, Concentric & Eccentric Reducer, End Pipe Cap, Long & Short Stubends, Seamless Butt weld pipe fittings, Welded Butt weld pipe fittings, and more.
The Monel 400 alloy has many excellent mechanical properties, making it famous in pipe fittings. The Monel 400 Pipe Fittings can give high performance. It is an alloy of nickel and copper, with a small amount of iron, manganese, carbon, and silicon content. The chemical composition of the Alloy 400 Pipe Fittings results in its high strength. Specialized Monel Fittings Manufacturer In India also concentrates on manufacturing high quality of these pipe fittings due to its high demand in various industries- its resistance towards acids and alkalis are the main reason behind that. The Alloy 400 Buttweld Elbow also possesses good ductility, thermal conductivity, and they can only be hardened by cold-working.

This specification covers forged low alloy flanges for use in pressure systems manufactured to specified dimensions or industry standard dimensional specifications.

316 pipe fittings are commonly used in commercial and industrial piping systems in chemical plants, pulp & paper, petroleum, food & beverage, sanitary, steam systems, and general industrial processes that are subject to various stressors.

A105 forged fittings are continually working harder in order to improvise the quality of the product as well as offered services.

The flange is second most used joining method after selding. Flanges are used when joints need dismantling. It provides flexibility for maintenance. Flange connects the pipe with various equipment and valves. Breakup flanges are added in the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrdlated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls are required in the selection and application of all there elements to attain a joint, which has acceptable leak tightness.
A flange is a protruded ridge, lip or rim, either external or internal, that serves to increase strength (as the flange of an iron beam such as an I-beam or a T-beam); for easy attachment/transfer of contact force with another object (as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera); or for stabilizing and guiding the movements of a machine or its parts (as the inside flange of a rail car or tram wheel, which keep the wheels from running off the rails). The term “flange” is also used for a kind of tool used to form flanges.

The ASTM A105 standard refers to carbon steel flanges that are forged for high-temperature applications in a pressure system.

Titanium is non-magnetic, has a higher melting point than steel alloys and good heat transfer properties, these properties mean that it is commonly used in heat exchange processes.

Stainless Steel 316 is an austenitic marine grade tube. These pipes are designed with an excellent chemical composition consisting of chromium, nickel and molybdenum. Excellent composition gives these items enhanced corrosion and oxidation resistance in stress-induced environments.

431 is a high chromium, low nickel, high hardenability martensitic stainless steel with high strength and good corrosion resistance. Compared to other 400 stainless grades, 431 stainless steel is designed to improve corrosion resistance and toughness, especially in quench hardened stainless steel. The 431 will perform well in marine environments as well as in aerospace applications such as aircraft fasteners and accessories. This alloy has great impact strength at high hardness levels.

A182-F11 is an American standard pearlitic structure heat-resistant steel forgings, the execution standard: ASTM-A182/A182M-2017.

An ASTM A403 WP304 Fittings is a type of austenitic grade fitting. SS Pipe Fittings can either be seamless or ERW.

254 SMo UNS S31254 super austenitic steel combines moderate tensile strength with high ductility for excellent corrosion resistance in seawater and various industrial environments. SMO 254 washer is effective against pitting, crevice corrosion and chloride stress corrosion cracking. 254 SMO washer is known for high ductility and good impact strength.

Hastelloy C276 is one of the few materials that can withstand the corrosive effects of wet chlorine, hypochlorite and chlorine dioxide.

The ASTM A312 Tp304 Seamless Tube is an austenitic stainless steel used for high temperature and corrosive services. The 304 Stainless Steel Tube is very cost effective because of the comparatively low cost and the mild strength and corrosion resistance.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

A105 carbon steel round bars contain carbon, manganese, phosphorus, sulfur, silicon, copper, nickel, chromium, molybdenum and vanadium.

S32760 is a super duplex stainless steel with a ferritic-austenitic microstructure.

They are used in various construction, engineering, and petrochemical industries

INCOLOY 800H is widely used in Power generation, superheater and reheater tubing have also employed the material. Heat treatment retorts, muffles jigs and fixtures have also used this material to great effect.

Grade 304/304L is resistant to atmospheric corrosion, in addition to a reasonable oxidizing and reducing environment. It has excellent resistance to intergranular corrosion in the as-welded state. ASTM A /304L Dual Grade has excellent strength and toughness at low temperatures. After cold rolling, it is subjected to hot repair, pickling or other repair, and finally cold rolling to achieve an acceptable gloss.

Alloy 625 is generally supplied in the annealed condition, to provide utmost stability during fabrication and subsequent service.

These SS 347 flat washers offer high strength, good corrosion resistance, good mechanical properties up to 600¡ãF (316¡ãC), and good toughness in the base metal and weld. Our stainless steel 347 lock washers are widely used in the aerospace, chemical, petrochemical, food processing, paper and general metalworking industries. At the same time, Din 1.4550 washers are slightly tougher than SS 304 and will produce equally tough sticky chips. Stainless Steel 347 Punch Washers have excellent resistance to intergranular corrosion when exposed to temperatures in the 800 ¨C 1500¡ãF (427 ¨C 816¡ãC) range for chromium carbide precipitation.

Titanium Welded Pipe?has a very high melting point which is even greater than 1650 degrees Centigrade or 3000 degrees Fahrenheit.

Alloy 904L (UNS N08904) is a super austenitic stainless steel designed to provide moderate to high corrosion resistance in a variety of process environments. The combination of high chromium and nickel content, with the addition of molybdenum and copper, ensures good corrosion resistance.

Steel pipe fitting are made of carbon or alloy steel pipe, plates, profiles, to a certain shape that could make a function (Change the fluids direction or rate) in pipeline systems. Mostly these fittings includes steel elbow (45 or 90 degree bend), tee, reducer (concentric or eccentric reducer), cross, caps, nipple, flanges, gasket, studs and etc.

The heat treatment could be heat treated according to any of the WPHY 52 specification by either tempering, normalizing, quenching or stress relieving.A860 refers to the high quality of the fittings.

316 Stainless Steel’s resistance to corrosion and contamination, low maintenance, and a familiar luster make stainless steel an ideal material for many applications that require the strength and corrosion resistance of steel. In addition, stainless steel can be rolled into sheet, plate, bar, wire and tube. These can be used in cookware, tableware, surgical instruments, major appliances, vehicles, construction materials in large buildings, industrial equipment (eg, paper mills, chemical plants, water treatment), and storage tanks and tankers for chemicals and food.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.49

Hex head bolts are ideal for many types of industrial fastener applications. The six-sided design of the 2205 Hex Bolt allows the bolt to be tightened or loosened quickly and efficiently, improving overall work speed and quick turnaround. Some additional benefits associated with using UNS S32205 Hex Bolts (also known as S31803) include: Extremely strong, hot forged, ASTM A449 and SAE J429 specified, improved corrosion resistance.

Basically, using 304L eliminates the need to anneal welded joints before using the full metal form, saving time and effort. In fact, both 304 and 304L can be used for many of the same applications. The differences are usually so small that one is not considered more useful than the other. When greater corrosion resistance is required, other alloys, such as grade 316 stainless steel, are often considered as an alternative.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.37

The flanges also have 8.89 grams per cubic centimeter density and 1370 degrees melting point. The DIN 2.4617 Socket Weld Flanges and other flanges are used in high temperature, high corrosive and high stress applications due to the higher mechanical properties.