TItanium tubing high strength

A789 UNS S31803 and UNS S32205 are two grades of duplex stainless steel that are widely used in various industrial applications. These Duplex S31803 Seamless Pipes are known for their excellent corrosion resistance, high strength, and good weldability. A789 is a specification that covers seamless and welded tubes made from duplex stainless steel.

The 316 stainless steel pipe has become an indispensable material for the industrial sector. This alloy of iron and chrome is recognized for its high resistance to corrosion, as well as its durability. 316 stainless steel tubing can be produced in both seamless and welded tubes to meet specific customer needs.

It is able to withstand a wide range of oxidizing and non-oxidizing chemicals, and exhibits outstanding resistance to pitting and crevice attack in the presence of chlorides and other halides.

Nickel based 800 Incoloy Hexagonal Pipe is known to have a good resistance to corrosion. Specifically speaking, the Incoloy 800 Pipe offers sufficient resistance against both carburization as well as oxidation corrosion.

This provides greatly enhanced resistance to sulfuric acid. It also has a high chromium content, to maximize its resistance to oxidizing chemicals and process streams contaminated with ferric ions and dissolved oxygen.

ASTM A312 TP316 is a standard specification for seamless, straight-seam welded, and heavily cold worked welded austenitic stainless steel pipes used in high-temperature and general corrosive service applications. The 316 Seamless Industrial Steel Pipe is made from a combination of chromium, nickel, and molybdenum, which gives SS 316 Seamless Tube excellent resistance to corrosion and rust.

Nilo / Alloy K W.Nr.: 1.3981
UNS: K94610 ASTM F15
Fixed-expansion glass-encapsulated iron-nickel-cobalt alloys, Kovar alloys, have a linear thermal expansion coefficient similar to that of hard glass within a certain temperature range
For mating sealing with hard glass

ASTM A240 Type 2205 Plate is a duplex stainless steel plate that is used extensively in various industries such as chemical processing, oil and gas exploration, and marine engineering. SA 240 GR 2205 Sheet is made from grade 2205 stainless steel, which is a combination of ferritic and austenitic steel.

Nilo Alloy 36, W.Nr 1.3912, Invar 36® is a nickel-iron, low controlled expansion alloy that contains 36% nickel and possesses a rate of thermal expansion approximately one-tenth that of carbon steel.
Invar 36 Specifications: UNS K93600, W.Nr 1.3912

Hastelloy Alloys Directory
The Corrosion Resistant HASTELLOY alloys are widely used by the chemical processing industries. The need for reliable performance leads to their acceptance and growth in the areas of energy, health and environmental, oil and gas, pharmaceutical and flue gas desulfurization industries.

Alloy 800 Weld Neck Flanges We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

Hastelloy C2000 Tubes are used in a broad range of industries including petrochemical processing, chemical processing equipment manufacturing, oil refineries and power plants.

316L 1.4401 S31603 Stainless Steel Pipe is a highly versatile and durable pipe option commonly used in a wide range of industrial and commercial applications. This SS UNS S31603 pipe is made from high quality 316L stainless steel with excellent resistance to corrosion, oxidation and staining, making it ideal for harsh environments or high stress applications.

Alloy 800 is a nickel-iron-chromium alloy with high strength and excellent resistance to oxidation and corrosion at high temperatures. ASTM B407 UNS N08800 Incoloy 800 W. Nr. 1.4876 Welded Pipe is widely used for construction of equipment requiring corrosion resistance, heat resistance, strength, and stability for service up to 1500°F (816°C).

Hastelloy C2000 is available in a variety of sizes and thicknesses, this type of nickel-chromium-molybdenum alloy is renowned for its superior strength and corrosion resistance.

SCH40 Monel 400 Pipe is designated as Werkstoff Number 2.4360 and UNS N04400. Alloy 400 Pipe also known as Monel Alloy 400 Pipe, Monel 400 Pipe & Nickel Alloy 400 Pipe.

Nickel 200 flanges The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment.

It demonstrates good resistance to neutral and reducing environments. This alloy creates a tenacious oxide, protective film that does not spall off, but it retains superior oxidation resistance at soaring temperatures.

Nickel Alloy 400 and Monel 400, also known as UNS N04400, is a ductile nickel-copper-based alloy consisting primarily of two-thirds nickel and one-third copper. Nickel Alloy 400 is known for its resistance to a variety of corrosive conditions, including alkalis (or acids), salt water, hydrofluoric acid, and sulfuric acid. Since Monel 400 or Alloy 400 is a cold worked metal, this alloy has high hardness, stiffness and strength. By cold working ASTM B164 UNS N04400 bar stock, the alloy is subjected to higher levels of mechanical stress, which in turn causes changes in the alloy’s microstructure.

Inconel 625 Coil is characterized by its excellent resistance to oxidation, high-temperature corrosion and fatigue. ASTM B443 UNS N06625 Inconel Plate is widely used in the aerospace, chemical processing and oil and gas industries due to its superior strength, toughness and durability even in extreme environments.

Common Trade Names: Nickel Alloy 36, Invar 36®, Nilo 6®, Pernifer 6®
Invar 36® is a nickel-iron, low expansion alloy that contains 36% nickel, Invar 36 has a low coefficient of expansion from cryogenic temperatures to about +500°F (260°C).
Invar 36 Tube OD:0.2-6mm, WT: 0.02-2mm

SMO 254 Pipes can withstand high mechanical stress and Alloy 254 SMO Pipe high pressure work in high temperatures and corrosive environments.

Higher chromium, molybdenum and nitrogen content results in a Pitting Resistance Equivalent Number (PREN) > 40, providing superior pitting and crevice corrosion capabilities to austenitic and duplex stainless steels in virtually all corrosive media, and critical pitting temperature Above 50¡ãC .

UNS N08367 also commonly referred to as alloy AL6XN is a low carbon, high purity, nitrogen-bearing “super-austenitic” nickel-molybdenum alloy with excellent resistance to chloride pitting and crevice corrosion.

AL6XN is a superaustenitic stainless steel with outstanding resistance to chloride pitting, crevice corrosion and stress corrosion cracking. AL6XN is a 6 moly alloy that was developed for and is used in highly aggressive environments. It has high nickel (24%), molybdenum (6.3%), nitrogen and chromium contents that give it excellent resistance to chloride stress corrosion cracking, chloride pitting, and exceptional general corrosion resistance. AL6XN is primarily used for its improved pitting and crevice corrosion resistance in chlorides. It is a formable and weldable stainless steel.

Inconel 600 round bar is a nickel-based alloy with benign carburization and excellent corrosion resistance at high temperatures. Inconel 600 round bars are effective against drying Cl2 and many other different gases at mild and high temperatures. Alloy 600 bar is a nickel-chromium alloy with good oxidation resistance and resistance to chloride pressure decomposition cracking, high cleanliness water corrosion and acid oxidation at elevated temperatures.

The pipes of seamless configurations have higher load-bearing capacity and strength over other grades.

Nickel-copper-based alloy 400 Monel 2.4360 cold drawn rod is virtually immune to chloride stress-related corrosion cracking when exposed to corrosive media in typical environments. Monel 400 is a copper and nickel based alloy that is popular today due to its high performance. The alloy has excellent acid and alkali resistance. In addition, it has good tensile strength, ductility, excellent thermal conductivity, and can be hardened by cold work. Additionally, it can be used in applications with temperatures ranging from minus to 538 degrees Celsius.

Inconel 718 is a nickel-chromium-based alloy that is commonly used in high-temperature applications such as aerospace and gas turbines. One of the most important factors in the production of ASTM B670 Inconel 718 Sheet is the plate rolling process. There are two main types of Inconel 718 plates available on the market: hot rolled and cold rolled plates.

It is widely used in offshore oil and gas exploration/production and in heat exchangers in petrochemical/chemical processing.

Stainless Steel 304 Flanges are made up of an austenitic stainless steel that has 18% chromium and 8% nickel in the composition. This composition makes the flanges strong and corrosion resistant for general corrosive services.

We also accept all orders of CS Elbow A234 WPB up to and including 90 degree to suit your requirements.

ASTM/ASME A387/SA387 Alloy Steel Gr. 5 CL 1/2 is a chrome molybdenum alloy steel plate primarily used in welded boilers and pressure vessels designed for high temperature service. The Cr content was 5.00%, and the Mo content was 0.5%.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

ASTM Specification A106 covers seamless carbon steel nominal wall pipe for high-temperature service, suitable for bending, flanging and similar forming operations. NPS 1-1/2 and under may be either hot finished or cold drawn. NPS 2 and larger shall be hot finished unless otherwise specified. Surface finish standards are outlined in the specification.

The combination of nickel and chromium in Incoloy 925 Ring Joint Type Flanges renders protection in both oxidizing and reducing atmospheres. High speed operations in Incoloy 925 Spacer Flanges such as grinding, milling or turning, are usually performed using water ¨C based coolants.

Alloy 800 – The 800 series of alloy (Incoloy 800, 800H and 800HT) are nickel-iron-chromium superalloys that have excellent properties of high temperature strength and resistance to oxidation, carburization and other types of high temperature corrosion. Alloy 800, 800H and 800HT are used in various applications from furnace components, petrochemical furnace cracker tubes to sheathing for electrical heating elements.

The strength of 800H is achieved by controlled levels of carbon, aluminum and titanium along with a 2100¡ãF minimum anneal to achieve a grain size of ASTM 5 or coarser.

The Stainless Steel 316 Welded Pipe is welded from strips of the same grade and they have equal strength as the 304 types but with added corrosion resistance due to the 4% molybdenum content in the composition. The ASTM A312 TP316 ERW Pipe belongs to the A312 specification for the tubular products and it can be used for high temperature and high pressure applications.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

The heat treatment process in which the steel is heated to an appropriate temperature (above or below Ac 1 ), kept for a certain period of time, and then slowly cooled to obtain a structure close to the equilibrium state is called annealing.

It can be easily welded and processed by standard shop fabrication practices.

Alloy 600 is relatively immune to most neutral and alkaline salt solutions and is used in some corrosive environments. The alloy is resistant to steam and mixtures of steam, air and carbon dioxide.

Stainless Steel 304 Sheet is made up of an austenitic stainless steel that has 18% chromium and 8% nickel in the composition.

SAE 304 stainless steel is the most common stainless steel. The steel contains both chromium (between 18% and 20%) and nickel (between 8% and 10.5%)[1] metals as the main non-iron constituents. It is an austenitic stainless steel. It is less electrically and thermally conductive than carbon steel. It is magnetic, but less magnetic than steel. It has a higher corrosion resistance than regular steel and is widely used because of the ease in which it is formed into various shapes.[1]

Components like fittings and Carbon Steel SA105 Pipe Flanges aid in regulating the flow of said media. Unlike fittings, flanges, however, work at a deeper level.

Stainless steel pipes are long, hollow tubes that are used for a wide range of industrial applications. They are produced by two distinct methods which result in either a welded or seamless pipe. Alloy 304 stainless steel pipe provides enhanced strength and corrosion resistance and can be used for all types of fabrication processes, especially those that are subjected to outdoor environmental conditions.

ASTM A182 F5 flanges are forged flanges made of chrome molybdenum low alloy steel called 5Cr-0.5Mo, UNS designation K41545. Widely used in oil refineries, chemical and petrochemical, power plant pipelines, heat exchangers, various pressure vessels and other pressure and high temperature services.

Carbon steel forgings, manufactured in accordance with ASTM A105, are generally used for piping applications. These forged carbon steel piping components (including flanges, fittings, and valves, etc) are used for ambient- and higher-temperature service in pressure systems. The A105N, which is designated with a suffix ¡°N¡±, denotes that the A105 forging shall be furnished in normalized condition. If the forgings are used for piping applications of ASME BPVC or ASME B31, the material shall be its identical equivalent of SA-105 or SA-105N. In short, the heat treatment of normalization distinguishes A105N from A105, or SA-105N from SA-105. ASTM A105 Flange is a specification of flanges. The specification can include different grades of stainless steel material made flanges. The flanges are of forged carbon steel and are meant for high temperature services.

AL-6XN is an alloy that is an austenitic stainless steel. It is often referred to as a super austenitic stainless steel because it has several useful properties. One of the main benefits of using al6xn bolts is that it can be used in high temperatures. Meanwhile, AL6XN is a super austenitic alloy, and the most abundant element is iron. It is the most popular of the 6% molybdenum alloys. Common uses are in the food processing, pharmaceutical and biotechnology industries. It exhibits superior corrosion resistance compared to duplex alloys in most environments. Due to the lower nickel content, AL6XN fasteners are generally more economical than high nickel alloy fasteners.

317 stainless steel, also known as UNS S31700 and grades 317, consists primarily of 18 to 20 percent chromium and 11 to 15 percent nickel, with traces of carbon, phosphorus, sulfur, silicon, and iron. ASTM A276 317 Materials It can be clearly stated that rebar is one of the core components of any manufacturing industry or any industry that relies on machinery.

The forging process also consolidates the material to produce an essentially wrought steel structure. The product is subsequently machined to the exact shape and size of finished flange.

Super Duplex 2507 is used in environments containing high levels of chlorides or dissolved oxygen, such as seawater cooling, salt evaporation, and desalination, geothermal wells.

2507 is used for oil and gas industry equipment, offshore platforms, heat exchangers, process and service water systems, fire-fighting systems, and injection and ballast water systems.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

Duplex ( UNS S31803 / S32205 ) rods, also known as steel rods (ASTM A276 / ASTM A479 ), have excellent corrosion resistance. Stainless steel rods/stainless steel rods ( en 1.4462 ) are resistant to intergranular and crevice corrosion.

304 stainless steel is the most common stainless steel. The steel contains both chromium (between 18% and 20%) and nickel (between 8% and 10.5%)[1] metals as the main non-iron constituents. It is an austenitic stainless steel.When it comes to uses, SS304 can be found in kitchen sinks and other appliances such as toasters and microwave ovens. SS304 is also used to make pressure vessels, wheel covers as well as for building facades.

Grade 316L Stainless Steel Tubing was specifically designed for the intention of being used in applications where a welding procedure to be performed on these tubes is considered to be a mandate. Hence, the content of carbon has been reduced in the Stainless Steel 316L Bright Annealed Tube, which is indicated by the letter L after the alloy grade. A reduced carbon content in seamless stainless steel tubing 316l also makes it structurally weaker in comparison to the regular grade 316 alloy. In order to bring the mechanical properties of the 316l stainless steel tube seamless at par with grade 316, the alloy has a significant addition of nitrogen.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.19

These are presented with pressure numbers Pn6 through PN64. The applications of the 601 Alloy Weld Neck Flangeis in the chemical, power plant, petroleum and petrochemical industrial applications.

Inconel 600 fittings are made from a nickel-chromium alloy that contains a minimum of 72% nickel and 14% chromium in a composition with carbon, manganese, silicon, sulfur, copper and iron.

U-bolt diameter: ¦Õ7mm, plate size: 3.890 x 1.142 x 0.110mm.
Material: Q235B carbon steel, electro-galvanized surface to improve the rust and corrosion resistance of U-bolts.
Nut: Anti-slip washer design.
Application: For fixing or connecting blocking pieces to pipes, wood, etc. Suitable for boats, plumbing and other domestic and industrial applications.
Package Contents: 10 U-Bolts, 20 Nuts, 20 Round Washers, 10 Plates.