tube fitting carbon steel tee of ASTM SA234

SS UNS S31603 Equal Tee is available in welded and seamless versions for a 90¡ã connection to the main pipe. They are also resistant to high temperatures and pressures and have wall thicknesses suitable for pipes in the automotive, industrial, marine and power generation industries. Molybdenum-containing austenitic stainless steel DIN 1.4404 seamless pipe fittings are relatively low in carbon compared to DIN 1.4401 grades, but with small additions of molybdenum and nitrogen, and are used in light or moderately corrosive industries.

Often the angle of elbow is 90 degrees but there are different types of elbows with different angles as well. The Carbon steel welded pipe fittings are also one of the cost efficient methods to apply with other types of steel.

UNS N06600 Butt Weld Fittings also contain 1% manganese and 0.50% silicon and copper. ASME SB366 Inconel 600 Butt Weld Fittings melt at 2580 degrees Fahrenheit. Inconel 600 fittings have excellent corrosion resistance to pitting and crevice corrosion.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

304 stainless steel is the most common stainless steel. The steel contains both chromium (between 18% and 20%) and nickel (between 8% and 10.5%)[1] metals as the main non-iron constituents. It is an austenitic stainless steel.When it comes to uses, SS304 can be found in kitchen sinks and other appliances such as toasters and microwave ovens. SS304 is also used to make pressure vessels, wheel covers as well as for building facades.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

These nickel steel alloys are identical except for the higher level of carbon in alloy 800H, and the addition of up to 1.20 percent aluminum and titanium in alloy 800HT. Incoloy 800 was the first of these alloys and it was slightly modified into Incoloy 800H.

The Nickel Alloy 800H is known for its excellent cold forming characteristics.

One alloy that falls into the austenitic category is stainless steel 304 pipe fittings. Not only is this alloy very economical, but the metal has good strength and moderate corrosion resistance. The utility of these 304 stainless steel pipe fittings is for those industries looking for economical components that add value to their piping systems.

ASTM A403 WP 316 Elbow covers the standard for wrought austenitic stainless steel fillers. These are used in pressure piping applications. SS 316 45 degree elbows and other 306 pipe fittings shall be performed using a variety of operations such as pressing, piercing, hammering, rolling, bending, upsetting, fusion welding, extrusion, machining, or the combination of two or more of these methods. combination.

Hastelloy B2 pipe bend provides resistance to pure sulfuric acid and a number of non-oxidizing acids. The alloy should not be used in oxidizing media or where oxidizing contaminants are available in reducing media.

Inconel 625 Fittings are made up of an nickel alloy that is non ¨C magnetic. It has high toughness and strength. The material is corrosion resistant and oxidation resistant.

As an important category of pipe fittings, pipe caps are in great demand. If a solvent welded cap is used as a future connection point, you must leave a few inches of tubing in front of the cap; when the cap is cut off for future connections, you must leave enough tubing to allow the new fitting to be glued to it. We offer 1-4 inch bw ss pipe fittings 304L cap.

Monel 400 (also known as alloy 400) is an attractive option for industries where corrosion resistance is of the highest priority.

ASTM A815 specification covers two general classes, WP and CR, of wrought ferritic, ferritic/austenitic, and martensitic stainless steel fittings of seamless and welded construction. Class WP fittings are subdivided into four subclasses: Classes WP-S, WP-W, WP-WX, and WP-WU. The material for fittings shall consist of forgings, bars, plates, or seamless or welded tubular products.

We are manufacturers of Stainless Steel 304 Butt Weld Fittings that are produced in a variety of designs, style, specifications, grades and sizes, with each fitting serving an industry’s need.

Alloy Steel ASTM A234 WP22 Buttweld Fittings are one of the most demanding products among various industries around the world.We are a manufacturer, trader, stockist, supplier and exporter of A234 WPL22 Pipe Fittings which abide by the specifications of ASTM A234, which include wrought Carbon steel as well as Alloy Steel fittings, of seamless and welded construction.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

ASTM A815 Pipe Fittings, ASTM A815 Super Duplex 2507 Pipe Fittings, UNS S32750 Super Duplex Pipe Fittings, ASTM A815 32205 Seamless Pipe Fittings, ASTM A815 S32950 Butt weld Fittings, ASTM A815 Super Duplex S32760 Pipe Fittings Exporter.

Stainless steel sanitary fittings are classified according to the three types of containers they may be built in: pipes, pipes and hoses. A pipe is a hollow tube of a homogeneous substance with a certain rigidity and durability. In industry, pipes and pipes are often the same, the only difference is how their lengths are defined. Tubing and fittings are often characterized by precise rather than nominal measurements.

These alloys can function at very high temperatures and in severe mechanical stress environments, and also where high surface stability is required. They have high creep and oxidation resistance.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Hastelloy X is a nickel-based superalloy ideal for gas turbine engine, aircraft, industrial furnace, and chemical processing applications.

An elbow is a flexible component that allows changing directions in a piping system. Elbow is divided into two groups of long radius and short radius, which can be changed by 45 degrees, 90 degrees and 180 degrees. Elbows can be classified based on distance, which changes in direction from the centerline to the opposite face of the component. Also called center distance. Opposite the center for long radius elbows is the 1.1/2 X nominal pipe size, while for short radius elbows it is the same as the nominal pipe size.

In oxidizing conditions, INCONEL 600 has better corrosion resistance than Alloy 200 and Alloy 201.

Nickel Alloy 600 is a solid solution of its elements and cannot be strengthened by heat treatment. Cold working will result in increased strength. Heat treatment can remove any undesirable effects of cold work.

Alloy 20 (Alloy 20) is an iron-based austenitic alloy developed to resist sulfuric acid corrosion. It has excellent resistance to sulfuric acid corrosion; it has strong resistance to phosphoric acid, nitric acid and chloride environments, chloride stress corrosion, pitting corrosion and crack corrosion. Therefore, alloy 20 has the name of anti-corrosion alloy; it has a wide range of applications: such as: chemical, food, medicine, power production and plastics industries will use it. For resistance to pitting corrosion and chloride corrosion, stress corrosion cracking problems, etc., alloy 20 is often used.

The corrosion resistance of Monel alloy K-500 is subtantially equivalent to that of alloy 400 except that, when in the age-hardened condition, alloy K-500 has a greater tendency toward stress-corrosion cracking in some environments.

These super duplex fittings products are designed in accordance with national and international standard specifications. These Super Duplex Steel S32750 Seamless Fittings and Super Duplex Steel S32750 Welded Fittings are widely used in various application industries such as automotive, chemical, marine, power plants, heavy engineering, etc.