U-bolt DIN3570 bolt with partial thread flange boltInconel 600 2.4816 Bolts

Inconel 718 is a nickel-chromium-based alloy that is commonly used in high-temperature applications such as aerospace and gas turbines. One of the most important factors in the production of ASTM B670 Inconel 718 Sheet is the plate rolling process. There are two main types of Inconel 718 plates available on the market: hot rolled and cold rolled plates.

Inconel 625 Coil is characterized by its excellent resistance to oxidation, high-temperature corrosion and fatigue. ASTM B443 UNS N06625 Inconel Plate is widely used in the aerospace, chemical processing and oil and gas industries due to its superior strength, toughness and durability even in extreme environments.

Inconel 600 round bar is a nickel-based alloy with benign carburization and excellent corrosion resistance at high temperatures. Inconel 600 round bars are effective against drying Cl2 and many other different gases at mild and high temperatures. Alloy 600 bar is a nickel-chromium alloy with good oxidation resistance and resistance to chloride pressure decomposition cracking, high cleanliness water corrosion and acid oxidation at elevated temperatures.

Inconel 600 seamless tubes of standard UNS N06600 and ASTM B167 are the ones manufactured to sustain excessively high pressure and come with great warranty.

625 alloy has excellent corrosion resistance to various corrosion media in oxidation and reduction environment

It has little or no attack occurs at room and elevated temperatures in dry gases, such as chlorine or hydrogen chloride. At temperatures up to 550C in these media, this alloy has been shown to be one of the most resistant of the common alloys.

Resistant to a wide range of corrosive media. The chromium content gives better resistance than Alloy 200 and 201 under oxidizing conditions, at the same time the high nickel gives good resistance to reducing conditions.

Inconel 601 Flanges are made up of a nickel chromium alloy. The material grads range differently with the composition ratio. The 601 grade has 58% nickel, 21% chromium, carbon, manganese, silicon, sulfur, copper and iron in the composition.

Alloy 600 has good hot and cold workability in the annealed condition. Hot-working should be done above 1600¡ãF (871¡ãC) to ensure adequate ductility, while cold work should be performed below 1200¡ãF (649¡ãC).

INCONEL 625 is a nickel-chromium alloy with an addition of molybdenum and niobium. These additions give the alloy better mechanical properties and better corrosion resistance without having to harden the material.

The added titanium, with proper heat treatment, stabilizes the susceptibility of Inconel plate flanges to intergranular corrosion. With an unwavering commitment to quality, we offer our customers a wide variety of Inconel Butt Weld Neck Raised Face Flanges.

The nickel content in Inconel 600 sheet helps the alloy maintain its corrosion resistance properties. This corrosion resistance is evident even under reducing conditions, where Alloy 600 plate is resistant to corrosion by a variety of organic and inorganic compounds.

Nickel Alloy 718 fasteners show good resistance in acidic, alkaline and neutral salt solutions, but severe corrosion occurs in oxidizing salt solutions.

The Nickel Alloy 601 Cold Finished Bar is formed after the hot-rolling process comes to an end.

There are different types such as socket weld flanges, welded neck flanges, Inconel 601 Slip On Flanges, orifice flanges and so on. The flanges made of this material are strong, corrosion resistant to acids, reducing agents and oxidation and are also harder.

ASTM B564 UNS N02200 Flange The Nickel alloy 200 has some excellent properties, which have made it quite famous in various industries. The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment. We are a specialized Nickel 200 Flange Manufacturer In China who produces the flanges of the given grade in different shapes and sizes, according to the dimensional requirements of the client. Our experienced team of professionals supervises the process of manufacturing Nickel 200 Slip On Flanges to ensure they have the correct dimensional accuracy and quality. They also conduct certification tests to ensure the product’s condition before delivering it to the customers.

Inconel 625 also commonly goes by the names: Haynes 625, Altemp 625, Nickelvac 625, and Nicrofer 6020.

Inconel 718 is a precipitation hardening nickel-chromium alloy containing large amounts of iron, niobium and molybdenum, and small amounts of aluminum and titanium. 718 material maintains high strength and good ductility at temperatures up to 1300¡ãF (704¡ãC). Compared with other precipitation hardening nickel alloys, this alloy has relatively good weldability, formability and excellent low temperature properties. The alloy’s slow precipitation hardening reaction makes it easy to weld without hardening or cracking. Inconel? Alloy 718 is non-magnetic. It maintains good corrosion and oxidation resistance for applications requiring high creep and stress-rupture resistance at temperatures up to 1300¡ãF (704¡ãC) and oxidation resistance up to 1800¡ãF (982¡ãC) parts.

Inconel 600 is a nickel-chromium alloy with good oxidation resistance at higher temperatures, with good resistance in carburizing and chloride containing environments.

Some typical applications for Inconel 625 include chemical processing, aerospace and marine engineering, pollution control equipment and nuclear reactors.

Alloy 600 is relatively immune to most neutral and alkaline salt solutions and is used in some corrosive environments. The alloy is resistant to steam and mixtures of steam, air and carbon dioxide.

ASTM B564 Inconel 625 Flange Alloy 625,inconel 625 flange,UNS N06625 Flange is a nickel-chromium-molybdenum alloy that is used for its high strength, high toughness and excellent corrosion resistance. The strength of alloy 625,UNS N06625 is derived from the stiffening effect of molybdenum and niobium on its nickel-chromium matrix. Although the alloy was developed for high temperature strength, its highly alloyed composition also provides a significant level of general corrosion resistance.

Chromium, when added to Alloy 600 Inconel rods along with nickel, increases the alloy’s resistance to sulfur-containing compounds while providing resistance to oxidizing conditions at high temperatures or in the presence of corrosive solutions.

One of the most widely used general purpose grades of hardenable Inconel alloys, Inconel 718 contains chromium-nickel with minor additions of aluminum and titanium.

Roller hearths and radiant tubes, in carbon nitriding processes especially.

Under reductive conditions, the Inconel 600 Slip on Flange demonstrates excellent resistance to not only inorganic compounds but also organic compounds along with alkali compounds as well

The alloy’s properties make it an excellent choice for sea-water applications, including freedom from local attack (pitting and crevice corrosion), high corrosion-fatigue strength, high tensile strength, and resistance to chloride-ion stress-corrosion cracking.

The mechanical properties of Inconel 718 fittings are very interesting, which makes it popular in various industries. For example, ASTM B366 UNS N07718 Inconel 718 fittings have high creep rupture strength at elevated temperatures up to 700 degrees Celsius.

The high creep resistance and yield strength of Inconel 625 elbow make this superalloy a good choice for tubes, piping, and plant equipment that require welding.

It has high resistance to oxidation at elevated temperatures up to 1050C.

ASTM B564 NO2200 WN flanges The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment.

Inconel 718 tubing is a high performance nickel alloy used in sour oil and gas fields. Inconel 718 tube hardened nickel-based alloys and cold-worked solid nickel-based alloys offer many advantages including high strength, toughness, low magnetic permeability, and excellent corrosion resistance.

Werkstoff Nr 2.4668 forged parts can be easily machined in the annealed or age hardened condition. While machining the alloy in the age hardened condition yields a better surface finish, machining Inconel 718 alloy in the annealed condition yields longer tool life.

At elevated temperatures the annealed and solution annealed alloy shows good resistance to scaling and has high strength. The alloy also resists ammonia bearing atmospheres, as well as nitrogen and carburizing gases.