U-bolt DIN3570 high corrosionduplex 2205 U-bolt

It is widely used in offshore oil and gas exploration/production and in heat exchangers in petrochemical/chemical processing.

A789 UNS S31803 and UNS S32205 are two grades of duplex stainless steel that are widely used in various industrial applications. These Duplex S31803 Seamless Pipes are known for their excellent corrosion resistance, high strength, and good weldability. A789 is a specification that covers seamless and welded tubes made from duplex stainless steel.

Higher chromium, molybdenum and nitrogen content results in a Pitting Resistance Equivalent Number (PREN) > 40, providing superior pitting and crevice corrosion capabilities to austenitic and duplex stainless steels in virtually all corrosive media, and critical pitting temperature Above 50¡ãC .

ASTM A240 Type 2205 Plate is a duplex stainless steel plate that is used extensively in various industries such as chemical processing, oil and gas exploration, and marine engineering. SA 240 GR 2205 Sheet is made from grade 2205 stainless steel, which is a combination of ferritic and austenitic steel.

S32760 has very good resistance to localized corrosion and stress corrosion cracking and high mechanical strength.

Duplex stainless steel fasteners are available in Super Duplex, Lean Duplex and Standard Duplex grades, each with specific properties for differenut applications.

2205 duplex grade without requiring higher levels of nickel or molybdenum. This means that it is a low-cost option than most austenitic stainless steel having the same requirements.

The ASTM A182 F51 flanges refer to standard or non-standard flanges manufactured in accordance with ASTM A182 Grade F51, which is designated with UNS number S31803.

Additionally, Duplex 2205 is the most widely used duplex grade on the market. Duplex 2205 alloy is a nitrogen-enhanced duplex stainless steel alloy. The effect of nitrogen is to significantly increase the corrosion resistance of the alloy; especially in the as-welded condition.

The yield strength of duplex stainless steel is twice that of austenitic stainless steel. This feature allows designers to reduce weight when designing products, making this alloy more cost-effective than 316, 317L.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

Duplex nuts S31803 also have good fatigue and corrosion resistance in most environmenutal conditions.

A182 F53 material displays excellent corrosion resistance.

The A182 Gr. F51 / S31803 material is a typical duplex stainless steel, which contains approximately 50% ferrite and 50% austenite.

The duplex microstructure gives this grade high strength UNS S32750 a low coefficient of thermal expansion and higher heat conductivity than austenitic steels and is suitable for working temperatures up to 300¡ãC.

Super Duplex stainless for e.g. alloy UNS S32750, has a mixed microstructure of both austenite as well as ferrite in an equal or 50/50 ratio.

Due to the ferritic portion of the duplex structure of the alloy it is very resistant to stress corrosion cracking in warm chloride containing environments.

Duplex 2205 is a (two-phase) ferritic-austenitic stainless steel with high strength and excellenut corrosion resistance, with a maximum Brinell hardness of 290 (Rc31) in the annealed condition.

The formation of ASTM A479 duplex steel UNS S32205 tie rod consists of a pool of austenite surrounded by continuous ferrite phases. ASME SA 479 Duplex Steel UNS S31803 Tie Rods are hot worked in the temperature range of 1750¡ãF to 2100¡ãF. This is designed to reduce the depth used in fabrication, thereby reducing the weight of precise significance for items such as pressure vessels, structural functions, etc. As ASTM A479 dual phase steel for bridges, storage tanks, etc. UNS S32205 rebar has approximately twice the superior performance of SS 304 .

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Phase stainless steel UNS S31803 fasteners exhibit the properties of austenitic and ferritic stainless steels. UNS S31803 dual phase steel fasteners have high strength, good resistance to sulfide stress corrosion and excellent impact toughness.

Technically, the microstructure of a duplex 2205 tube is approximately 50% ferrite and 50% austenite. As a result, the properties inherited from both categories make this nitrogen-enhanced duplex 2205 seamless pipe ideal for use in industries such as food processing, oilfield piping and heat exchangers, and flue gas desulfurization.

Light gauges of 2507 material can often be used to achieve the same design strength of thicker nickel alloys. Duplex 2507 plate is suitable for applications requiring excellent strength and corrosion resistance. It contains 25% chromium, 4% molybdenum and 7% nickel.

S32750 Seamless Pipes are chromium and molybdenum mixtures with high resistance to pitting. Many industries prefer these Seamless Pipes for their resistance to stress corrosion cracking and crevice corrosion.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

As experts in the field of fasteners, we recognize that this alloy can be used in a variety of applications including heat exchangers, piping, pressure vessels, tanks, fans, pulp and paper equipment, oilfield equipment and press rolls. At HT PIPE you can find Duplex Premium Gaskets in high quality.

ASTM A479 Super Duplex 2507 Hex Bolts combines high strength and good ductility with outstanding corrosion resistance qualities. The higher chromium, molybdenum and nitrogen contents in these ASME SA 479 Alloy 2507 Hex Bolts result in a Pitting Resistance Equivalent number (PREN) of >40.

Since the material is also resistant to acids and chlorine compounds, it could see its application in marine environments, especially in saltwater containing chlorine compounds. The ferritic portion of the duplex structure of Super Duplex 2507 round bar alloy makes it resistant to stress corrosion cracking in warm chloride-containing environments.

UNS31803 has been supplemented by S32205 (F60) which dual conforms to S31803 but has a higher minimum N, MO, NI and Cr which guarantees a better corrosion resistance.

Preheating of UNS S32750 Super Duplex Fasteners is not necessary except to prevent condensation on cold metal.

ASTM A815 UNS S32205 Long Radius Elbow is used in turning pipe direction and is also resistant to chloride and sulfide environments. These ASME B16.9 Duplex Stainless Steel Seamless Fittings have a higher chromium content.

Astm A182 F51 flange is made up of carbon, chromium, manganese, silicon, phosphorus, sulfur, nickel, nitrogen, molybdenum and iron.

Duplex steel sheets are resistant to chloride stress corrosion cracking at 150¡ãC.

Super Duplex Steel have the benefit as it counterpart ¨C it has lower alloying costs when compared with austenitic grades and ferritic.

The flange is second most used joining method after selding. Flanges are used when joints need dismantling. It provides flexibility for maintenance. Flange connects the pipe with various equipment and valves. Breakup flanges are added in the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrdlated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls are required in the selection and application of all there elements to attain a joint, which has acceptable leak tightness.
A flange is a protruded ridge, lip or rim, either external or internal, that serves to increase strength (as the flange of an iron beam such as an I-beam or a T-beam); for easy attachment/transfer of contact force with another object (as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera); or for stabilizing and guiding the movements of a machine or its parts (as the inside flange of a rail car or tram wheel, which keep the wheels from running off the rails). The term “flange” is also used for a kind of tool used to form flanges.