UNS N06625 Inconel Alloy Socket weld Flanges UNS N06625 Pipe Flange

Inconel 600 round bar is a nickel-based alloy with benign carburization and excellent corrosion resistance at high temperatures. Inconel 600 round bars are effective against drying Cl2 and many other different gases at mild and high temperatures. Alloy 600 bar is a nickel-chromium alloy with good oxidation resistance and resistance to chloride pressure decomposition cracking, high cleanliness water corrosion and acid oxidation at elevated temperatures.

Inconel 625 Coil is characterized by its excellent resistance to oxidation, high-temperature corrosion and fatigue. ASTM B443 UNS N06625 Inconel Plate is widely used in the aerospace, chemical processing and oil and gas industries due to its superior strength, toughness and durability even in extreme environments.

Inconel 600 seamless tubes of standard UNS N06600 and ASTM B167 are the ones manufactured to sustain excessively high pressure and come with great warranty.

Inconel 718 is a nickel-chromium-based alloy that is commonly used in high-temperature applications such as aerospace and gas turbines. One of the most important factors in the production of ASTM B670 Inconel 718 Sheet is the plate rolling process. There are two main types of Inconel 718 plates available on the market: hot rolled and cold rolled plates.

HT PIPE was the company who was awarded the order to supply Inconel 600 Flanges & Pipe Fittings by Oil Corporation.

Dynamic Forge & Fittings (I) Pvt. Ltd. is an approved manufacturer of class 150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 flanges & all part of the comprehensive range of pipe flanges to requirements of BVIS, IBR, BARC, DNV, BHEL & we are ISO 9001:2008, 14001:2004, OHSAS 18001:2007 certified company.

INCONEL (nickel-chromium-iron) alloy 600 is a standard engineering material for applications which require resistance to corrosion and heat. The alloy also has excellent mechanical properties and presents the desirable combination of high strength and good workability.

The flange material has very high tensile strength of 930MPa and minimum yield strength of 517MPa. This strong material also has 1350 degrees Celsius melting point. This makes the flanges be applied in some of the tough and stressful applications.

The Inconel 600 Round Bar exhibit superior strength and excellent corrosion resistance properties.

All our Inconel 600 Flanges conform to relevant material and dimensional specifications and can be supplied complete with material certificates to EN 10204 3.1.

Alloy 718 is a precipitation hardenable nickel-based alloy designed to exhibit extremely high yield, tensile and creep rupture properties at temperatures up to 1300°F.

Inconel 718 flanges are high yield flanges known to maintain their tensile strength even at high temperatures. They are resistant to a variety of severely corrosive environments. The nickel content in these flanges helps them last long in temperatures ranging from cryogenics to 1200°F.

Inconel 600 pipe is a chromium-nickel alloy designed for use at temperatures up to 2000 F and down to as low as cryogenic levels. The alloy is resistant to reducing environments as well as chloride stress corrosion cracking due to its nickel content and resistant to weaker oxidizing conditions through its chromium content. Alloy 600 seamless nickel pipe is an austenitic alloy with high nickel content that is non-magnetic and has excellent mechanical properties at both elevated temperatures and cryogenic temperatures. Werkstoff NR 2.4816 Pipes have common applications in gas turbine blades, seals, and combustors, and turbocharger rotors and seals, electric submersible well pump motor shafts, high temperature fasteners, and so on. We are manufacturer, stockiest and exporter of ASTM B829 Inconel 600 Seamless Pipe and we offer these pipes in custom-made sizes and thicknesses, as per the exact demands of our admired clients.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

The production of flanges is also done by using the latest technology and modern equipment because of which no doubt greater superiority in product quality is added.

There are different types such as socket weld flanges, welded neck flanges, Inconel 601 Slip On Flanges, orifice flanges and so on. The flanges made of this material are strong, corrosion resistant to acids, reducing agents and oxidation and are also harder.

Alloy 600 is machinable in both hot and annealed conditions. Due to the large amount of heat generated when machining this alloy, high-speed steel, cast non-ferrous or carbide tools should be used.

If used in the paper industry, the ANSI B16.5 Slip on Flange has a good notable performance. Also, the Inconel 600 Weld Neck Flange has excellent immunity to chlorine ion stress corrosion cracking.

Our WNR 2.4856 Flanges retains potency over an extensive temperature range, striking for elevated temperature applications where steel and aluminum would yield to sneakby means of thermally persuaded crystal vacancies. These are accessible to our valuable customers in different range of diameters, wall thicknesses and sizes at quite affordable rates.

Inconel X750 ERW Pipes is a Chromium-Nickel alloy made from precipitation hardenable by accompaniments of Ti and Al, having creep – rupture potency at soaring …

Inconel 600 is a nickel-chromium alloy that is known for its excellent resistance to high-temperature corrosion and oxidation. ASTM B168 Inconel 600 Sheet is a flat plate of UNS N06600 that is commonly used in a wide range of industrial applications.

Inconel is used in aerospace applications as well as marine applications. Common applications for this alloy are springs, seals, bellows for submerged controls, electrical cable connectors, fasteners, flexure devices, and oceanographic instrument components.

Known to be one of the more heat resistant alloys, the Alloy 600 Blind Flange may be used with the intention of closing or shutting off a nozzle or a section of a pipe in a vessel, particularly in elevated temperature settings.

Alloy 600 Welded Pipe is a basic nickel chromium alloy for corrosive extraordinary heat requests.

ASTM B564 Inconel 625 flanges possess a high degree of formability, while demonstrating better weldability in comparison to many other highly alloyed nickel based materials.

Inconel 625 round bar has the following properties: Excellent fatigue and thermal fatigue capabilities, high tensile, creep and rupture capabilities Excellent resistance to oxidation, excellent weldability and brazability. Chloride stress degradation destroys tolerance.

Inconel 625 is a solid solution strengthened Ni-base superalloy, which has high strength at high temperatures.

Inconel X-750 Nuts are fasteners made from an alloy containing nickel and cobalt as base elements, which contains chromium, with additions of titanium and aluminum. Inconel X-750 fasteners are highly resistant to chemical corrosion and oxidation, with high stress rupture strength and low creep rates at high stresses up to 1500¡ãF (816¡ãC).

Inconel 625 is an austenitic nickel-based superalloy. High levels of molybdenum and niobium strengthen the chrome-nickel matrix of alloy 625 screws. Inconel 625 Bolts are fasteners made from a nickel-based alloy containing chromium and molybdenum, with additions of aluminum and titanium.

Alloy 718 fasteners are a major hardware element almost everywhere, whether it’s home appliances, machinery, automobiles, buildings, infrastructure, or any other item that needs to be assembled, there will definitely be fasteners to hold them all together.

ASTM B564 601 Spacer Flange Inconel 601 is a nickel-chromium alloy used for applications that require resistance to corrosion and heat. This nickel alloy stands out due to its resistance to high temperature oxidation, remaining highly resistant to oxidation through 2200¡ã F. Alloy 601 develops a tightly adherent oxide scale which resists spalling even under conditions of severe thermal cycling.

The outstanding and versatile corrosion resistance of INCONEL 625 alloy under a wide range of temperatures and pressures is a primary reason for its wide acceptance in the chemical processing field.

The mechanical properties of Inconel 718 fittings are very interesting, which makes it popular in various industries. For example, ASTM B366 UNS N07718 Inconel 718 fittings have high creep rupture strength at elevated temperatures up to 700 degrees Celsius.

It is virtually immune to chlorine ion stress corrosion cracking. Demonstrates adequate resistance to organic acids such as acetic, formic and stearic. Excellent resistance to high purity water used in primary and secondary circuits of pressurized nuclear reactors.

This nickel alloy is used from cryogenic temperatures up to long term service at 1200¡ã F.