UNS N08825 Flange

Alloy 800 is a nickel-iron-chromium alloy with high strength and excellent resistance to oxidation and corrosion at high temperatures. ASTM B407 UNS N08800 Incoloy 800 W. Nr. 1.4876 Welded Pipe is widely used for construction of equipment requiring corrosion resistance, heat resistance, strength, and stability for service up to 1500°F (816°C).

Nickel 200 flanges The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment.

Nickel based 800 Incoloy Hexagonal Pipe is known to have a good resistance to corrosion. Specifically speaking, the Incoloy 800 Pipe offers sufficient resistance against both carburization as well as oxidation corrosion.

Incoloy 800H Flange We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

Alloy 800 Weld Neck Flanges We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

The pipes of seamless configurations have higher load-bearing capacity and strength over other grades.

It was developed to provide exceptional corrosion resistance in both oxidizing and reducing environments.

Alloy 800H 800HT are two individual solid solution strengthened, iron nickel chromium alloys. They are typically o?ered as one, dual certi?ed alloy, meeting the chemical composition requirements of both alloys.

Alloy A286 is a precipitation hardening combining high strength and good corrosion resistance, austenitic stainless steel designed for temperatures up to 1300¡ãF (704¡ãC) where high tensile strength, excellent creep strength is required and good corrosion resistance. Incoloy Alloy A286 is an iron-nickel-chromium based austenitic iron based material with additions of molybdenum and titanium. Cres A286 alloy is known for its good strength and oxidation resistance, especially at temperatures up to 1300¡ãF (700¡ãC).

ASTM B564 Inconel 718 Threaded Flange Grade 718 Inconel Flange is the most common grade of the hardenable Inconel. This precipitation-hardened nickel-chromium alloy combines outstanding corrosion resistance and high strength at elevated temperatures. The alloy is an about 2x as strong as Inconel grade 625 having excellent creep-rupture strength at temperatures to 1300¡ãF (700¡ãC) and usable up to 1800¡ãF (982¡ãC). Inconel grade 718 is often used in gas turbines, rocket motors, spacecraft, nuclear reactors, pumps, and tooling.

B564 UNS N08825?has copper present in it which makes it immune to brine and seawater.

Round bar ranging from 3/4″ to 6″ diameter, and light gauge sheet and plate. Incoloy 800 H material can be supplied in random lengths, cut to order or machined to customer requirements. Machining includes drilling, threading, milling, CNC shapes, turning, tapping, flanges and others.

Incoloy 825 weld neck flange Alloy 825 Flanges also offer good mechanical features. The flanges produced by us are said to be sturdy and leakproof. They have a melting point of 1413 degrees C. and a density of 8.47g/cm3.

Inconel 825 is a nickel alloy that can be used in businesses that handle high thermal reactions. For example, Inconel 825 round bars are commonly used in industries such as air pollution control, chemical and petrochemical, steel pickling, ore processing, petroleum refining, offshore oil and gas production, food processing, and waste disposal.

Incoloy 800HT ASTM B564 Flanges Incoloy 800 / 800H / 800HT Flanges are furnished with nickel-chromium-iron alloys that intend outstanding resistance and strength at harsh environments. The flanges exhibit superior resistance to chloride stress corrosion cracking and crevice corrosion. Even more, it also shows superior intergranular corrosion, stress rupture and creepy aspects. The welding of these flanges is done using various techniques such as MIG, TIG and more.

Bolts and Nuts fall under the ASTM B166 specification for hot and cold work Inconel 600 bar, bar bolts and nuts. Standards vary from DIN, ASTM, BS and all other international standards. Inconel 600 fasteners can vary in length from custom lengths and 3mm to 200mm, and also in sizes from M3 to M56 and 3/6″ to 2″. There are different types of bolts and nuts in Alloy 600 Fasteners such as T-Nuts, Panel Nuts, Coupling Nuts and Lag and Hex Bolts.

This Incoloy 800HT board has improved high temperature properties. When we talk about its hardness, this ASME SB409 N08811 bar comes in soft, quarter hard, spring hard, etc. Furthermore, these plates have mechanical and chemical properties.

For service requiring optimum creep and rupture properties, Incoloy 800H or 800 HT are used. The high contents of nickel and chromium in the alloys also give good corrosion resistance.

Incoloy 825 hex nuts are known for their tight tolerances and precise dimensions. Incoloy 825 Heavy Duty Hex Nuts offer excellent resistance to localized corrosion such as reducing and oxidizing acids, stress corrosion cracking, and pitting and crevice corrosion. These Incoloy 825 nuts have good mechanical properties from low to moderately high temperatures. However, exposure of these alloy 825 nuts to temperatures above 1000¡ãF results in microstructural changes that significantly reduce ductility and impact strength.

As an austenitic and nickel-based alloy, Alloy 926 nuts are ductile over a wide temperature range from low temperatures to over 1000 degrees Fahrenheit (538 degrees Celsius). Machinability is typical of nickel-based alloys, with alloy 926 bolts that can be easily welded and formed using a variety of techniques.

ASTM B163 B407 ASME SB163 SB407 N08800 Incoloy 800 Seamless Pipe is especially suitable for high temperature equipment in the petrochemical industry because the alloy does not form an embrittled sigma phase after prolonged exposure to 1200¡ãF (649¡ãC).

For high temperature applications requiring optimum rupture and creep properties, Alloy 800H Plate (UNS N08810 Plate) and Alloy INCOLOY 800HT Coil (UNS N08811 Coil) are used. These are also known as WNR 1.4876Sheets, WNR 1.4958 Plates, and WNR 1.4859 Coils.

Monel bolts, such as Monel 400 and K500, are made of nickel-copper alloys and exhibit high strength, toughness and good corrosion resistance over a wide temperature range. A standout feature of Monel bolts is their excellent resistance to hydrofluoric acid, a particularly difficult acid to handle, at all concentrations up to the boiling point. For hydrofluoric acid applications, Monel bolts are probably the most corrosion resistant of all commonly used specialty alloys.

Alloy 625 is generally supplied in the annealed condition, to provide utmost stability during fabrication and subsequent service. INCONEL 625 alloy has found to have a resistance to potable and salt or brackish water, where Chloride ions cause pitting and crevice corrosion to become established. As a result, pipelines for gathering sour gas have been built with solid (or clad) INCONEL 625 alloy and used in seawater heat exchangers in refineries, power plants, and offshore topside services that often need this material.

Alloy 926 is a super austenitic molybdenum stainless steel with excellent resistance to a variety of highly corrosive environments. The combination of molybdenum and nitrogen in its composition resists pitting and crevice corrosion, while copper improves sulfuric acid resistance, while nitrogen increases yield and tensile strength.

Flanges are used to connect 2 pipes or tubes. They are made up of different materials depending upon the end use.

Gold 926 fasteners are also similar in composition to 904L, but with the addition of nitrogen and molybdenum, resulting in alloy 926 bolts with improved general corrosion resistance as well as pitting and crevice corrosion resistance. Because Alloy 926 is resistant to chloride stress corrosion cracking, it makes 926 fasteners ideal for desalination, pulp and paper mills. This alloy is also ideal for dilute sulfuric and phosphoric acid applications.

The principle di?erence between alloys 800H and 800HT is the restricted aluminum and titanium content in 800HT, which results in higher creep and stress rupture properties.

To avoid possible stress relaxation grain boundary cracking of N08811 in applications above 1000¡ãF the welded fabrication may be heated 1650¡ãF for about one hour per inch of thickness or 30 minutes minimum then air cooled.

Incoloy 800 round bars contain up to 35% nickel, up to 23% chromium and up to 39.5% iron. Incoloy 800 alloy round bars also contain carbon, molybdenum and silicon content. Incoloy 800 threaded rods can be used effectively at temperatures up to 600 degrees Celsius.

INCONEL 800H/HT – Alloy 800 (UNS N08800/1.4876) is a widely used material for equipment construction requiring corrosion, heat, strength and stability up to 1500¡ãF (816¡ãC) . Incoloy Inconel Alloy 800 has moderate corrosion resistance to many aqueous media and is resistant to stress corrosion cracking due to its nickel content.

Inconel 800, 800H and 800HT are nickel-iron-chromium alloys with excellent strength and good rust and carburization resistance at high temperature exposure. These types of nickel metal alloys are the same except that the 800H alloy has a higher carbon content, and about 1.20% aluminum and titanium are added to the 800HT alloy.

Incoloy 800 is an alloy whose primary constitution is made up of nickel, iron, and chromium. This particular alloy, unlike the former, has less than 50% nickel content in its chemical composition. Aside from their chemical makeup, the other points of distinction for both the alloys are their use in a specific set of applications or industries.

ncoloy 800H Forgings have good strength and excellent resistance to oxidation, sulfidation and carburization at elevated temperatures.

The emphasis of this alloy is placed on the fact that it is more resistant to aggressive forms of corrosion. In particular, Incoloy 800 shows very high resistance to corrosive compounds seen in aqueous environments.

Incoloy 800HT Flange We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.