welding nickel alloy flange plate design Inconel 718 flange WERKSTOFF NR. 2.4668 flange

Inconel 600 seamless tubes of standard UNS N06600 and ASTM B167 are the ones manufactured to sustain excessively high pressure and come with great warranty.

Inconel 718 is a nickel-chromium-based alloy that is commonly used in high-temperature applications such as aerospace and gas turbines. One of the most important factors in the production of ASTM B670 Inconel 718 Sheet is the plate rolling process. There are two main types of Inconel 718 plates available on the market: hot rolled and cold rolled plates.

Inconel 625 Coil is characterized by its excellent resistance to oxidation, high-temperature corrosion and fatigue. ASTM B443 UNS N06625 Inconel Plate is widely used in the aerospace, chemical processing and oil and gas industries due to its superior strength, toughness and durability even in extreme environments.

Inconel 600 round bar is a nickel-based alloy with benign carburization and excellent corrosion resistance at high temperatures. Inconel 600 round bars are effective against drying Cl2 and many other different gases at mild and high temperatures. Alloy 600 bar is a nickel-chromium alloy with good oxidation resistance and resistance to chloride pressure decomposition cracking, high cleanliness water corrosion and acid oxidation at elevated temperatures.

Inconel 718 contains nickel, chromium and molybdenum alloys as well as aluminum, niobium and titanium elements and is suitable for flange manufacturing. Our premium flanges have excellent yield strength and tensile strength. Our premium flanges also offer excellent resistance to corrosion, crevice corrosion, pitting and oxidation in severely corrosive environments. Has excellent workability, weldability and machinability,

Inconel 718 flanges are also used in jet engines, pump bodies and parts, rocket engines and thrust reversers, nuclear fuel element gaskets, hot extrusion tools, and more.

Alloy 600 / Inconel 600 is combination of Nickel Chromium and Iron providing a standard material for the chemical industry and the automotive engine, aero engine and airframe sectors.

Alloy 600 is non-magnetic, has excellent mechanical properties and a combination of high strength and good workability and is readily weldable.

Alloy 625 rods are commonly used in oil and gas production where hydrogen sulfide and elemental sulfur are present at temperatures in excess of 150 degrees Celsius. These Nickel 625 round bars are very resistant to seawater under flowing and stagnant conditions as well as under fouling conditions.

Inconel 718 flanges are used in aerospace, gas turbines, rocket engines, spacecraft, space shuttles, nuclear reactors, pumps, turbo pump seals and tooling.

ASME SB564 Alloy 601 weld neck flanges nconel 601 is a nickel-chromium alloy used for applications that require resistance to corrosion and heat. This nickel alloy stands out due to its resistance to high temperature oxidation, remaining highly resistant to oxidation through 2200¡ã F. Alloy 601 develops a tightly adherent oxide scale which resists spalling even under conditions of severe thermal cycling.

Alloy 600 reducer is a blend of Nickel Chromium and Iron that provides a standard material for chemical manufacturing and the automotive machine, airframe and aircraft engine segments.

Inconel 625 elbow is made of high-performance nickel-chromium-molybdenum alloy known for its high level of strength, temperature resistance, and corrosion resistance.

All our Inconel 600 Flanges conform to relevant material and dimensional specifications and can be supplied complete with material certificates to EN 10204 3.1.

Inconel 625 Clad Pipe is an alloy that is not susceptible to rot due to oxidation. This material is suitable for structural construction, especially components such as Alloy 625 seamless tubing for heat transfer applications.

Inconel Alloy 718 is an alloy containing high amounts of nickel, chromium and molybdenum. It is one of the most popular nickel-based superalloys and is widely used for its excellent resistance to corrosive environments such as crevice and pitting corrosion.

They have a minimum tensile strength of 120Ksi and minimum yield strength of 60ksi.

Inconel 625 Stud Bolts are used mostly in cyclic cooling and heating applications. They are useful in electric resistance welding applications. The bolts are used in housing of engines, honeycomb structures and in hydraulic lines.

Inconel 718 fasteners have been used in environments from -400o F (-250o C) to 1300o F (700o C). Typical applications include gas turbine parts and cryogenic storage tanks.

Another important feature of Inconel 625 bar is its enhanced corrosion resistance. UNS N06625 Bar is resistant to a wide range of severe corrosive environments.

The Nickel Alloy 601 Cold Finished Bar is formed after the hot-rolling process comes to an end.

Alloy 601 Flanges Inconel 601 is a nickel-chromium alloy used for applications that require resistance to corrosion and heat. This nickel alloy stands out due to its resistance to high temperature oxidation, remaining highly resistant to oxidation through 2200¡ã F. Alloy 601 develops a tightly adherent oxide scale which resists spalling even under conditions of severe thermal cycling.

The material is denser than the ordinary stainless steels and has 1411 degrees Celsius melting point. These flanges belong to the ASTM B564 specification and the standards are ASME, ASTM, DIN and other international standards such as ASME B16.5, B16.47 and so on.

ASTM B564 601 Long WN Flange nconel 601 is a nickel-chromium alloy used for applications that require resistance to corrosion and heat. This nickel alloy stands out due to its resistance to high temperature oxidation, remaining highly resistant to oxidation through 2200¡ã F. Alloy 601 develops a tightly adherent oxide scale which resists spalling even under conditions of severe thermal cycling.

Alloy 600 has good hot and cold workability in the annealed condition. Hot-working should be done above 1600¡ãF (871¡ãC) to ensure adequate ductility, while cold work should be performed below 1200¡ãF (649¡ãC).

Inconel 718 studs and other fasteners have different types of threads. Available in BSW, UNC, BSF, UNF, Metric or others as required.

Inconel 625 elbow works well even in extreme temperatures under high stress.

Inconel 718 has become useful in a wide range of applications ranging from manufacturing operations to military equipment and the aerospace industry.

Inconel 625 Bars For excellent machinability, these bars are equipped with low cutting speeds, heavy equipment, ample coolant, rigid workpieces and tooling. One thing to keep in mind about these bars is that it does work harden quickly, so intermediate annealing can be used for complex part forming operations.

Inconel 625 Bolts are easy to weld using conventional welding processes, which is especially useful for Inconel 625 Weld Studs. This alloy is often chosen for its weldability compared to other highly alloyed nickel-based alloys. Alloy 625 resists intergranular corrosion even in the as-welded condition. Furthermore, post-weld heat treatment of the weld is not necessary to maintain corrosion resistance.

Alloy 725 (UNS N07725) is a nickel-chromium-molybdenum-niobium alloy that is highly corrosion resistant and age hardened to twice the strength of annealed alloy 625. The strength of Alloy 725 is increased by heat treatment rather than cold treatment. This also gives strength to large uneven parts that cannot be strengthened by cold work. Alloy 725 is used for hangers, landing joints and high strength fasteners in marine applications.

Inconel X750 is an alloy that has a high resistance to corrosion and oxidation.

Inconel 625 also commonly goes by the names: Haynes 625, Altemp 625, Nickelvac 625, and Nicrofer 6020.

Inconel 625 Bolts are used mostly in cyclic cooling and heating applications. They are useful in electric resistance welding applications. The bolts are used in housing of engines, honeycomb structures and in hydraulic lines