wholesale carbon steel 10.9 hex heavy bolt full thread DIN933

ASME B36.19M is the standard specification for stainless steel pipes, which specifies the dimensions, tolerance, and manufacturing requirements for both welded and seamless pipes.

Incoloy 800H Flange We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

It demonstrates good resistance to neutral and reducing environments. This alloy creates a tenacious oxide, protective film that does not spall off, but it retains superior oxidation resistance at soaring temperatures.

Nickel Alloy 400 and Monel 400, also known as UNS N04400, is a ductile nickel-copper-based alloy consisting primarily of two-thirds nickel and one-third copper. Nickel Alloy 400 is known for its resistance to a variety of corrosive conditions, including alkalis (or acids), salt water, hydrofluoric acid, and sulfuric acid. Since Monel 400 or Alloy 400 is a cold worked metal, this alloy has high hardness, stiffness and strength. By cold working ASTM B164 UNS N04400 bar stock, the alloy is subjected to higher levels of mechanical stress, which in turn causes changes in the alloy’s microstructure.

Nickel based 800 Incoloy Hexagonal Pipe is known to have a good resistance to corrosion. Specifically speaking, the Incoloy 800 Pipe offers sufficient resistance against both carburization as well as oxidation corrosion.

Inconel 600 seamless tubes of standard UNS N06600 and ASTM B167 are the ones manufactured to sustain excessively high pressure and come with great warranty.

ASTM A240 Type 2205 Plate is a duplex stainless steel plate that is used extensively in various industries such as chemical processing, oil and gas exploration, and marine engineering. SA 240 GR 2205 Sheet is made from grade 2205 stainless steel, which is a combination of ferritic and austenitic steel.

Hastelloy C2000 Tubes are used in a broad range of industries including petrochemical processing, chemical processing equipment manufacturing, oil refineries and power plants.

Common Trade Names: Nickel Alloy 36, Invar 36®, Nilo 6®, Pernifer 6®
Invar 36® is a nickel-iron, low expansion alloy that contains 36% nickel, Invar 36 has a low coefficient of expansion from cryogenic temperatures to about +500°F (260°C).
Invar 36 Tube OD:0.2-6mm, WT: 0.02-2mm

A789 UNS S31803 and UNS S32205 are two grades of duplex stainless steel that are widely used in various industrial applications. These Duplex S31803 Seamless Pipes are known for their excellent corrosion resistance, high strength, and good weldability. A789 is a specification that covers seamless and welded tubes made from duplex stainless steel.

Nickel 200 flanges The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment.

Titanium’s density is about 60% that of stainless steel and nickel alloys, this weight saving makes it a popular choice in applications where this is critical such as aerospace.

AL6XN is a superaustenitic stainless steel with outstanding resistance to chloride pitting, crevice corrosion and stress corrosion cracking. AL6XN is a 6 moly alloy that was developed for and is used in highly aggressive environments. It has high nickel (24%), molybdenum (6.3%), nitrogen and chromium contents that give it excellent resistance to chloride stress corrosion cracking, chloride pitting, and exceptional general corrosion resistance. AL6XN is primarily used for its improved pitting and crevice corrosion resistance in chlorides. It is a formable and weldable stainless steel.

SCH40 Monel 400 Pipe is designated as Werkstoff Number 2.4360 and UNS N04400. Alloy 400 Pipe also known as Monel Alloy 400 Pipe, Monel 400 Pipe & Nickel Alloy 400 Pipe.

Higher chromium, molybdenum and nitrogen content results in a Pitting Resistance Equivalent Number (PREN) > 40, providing superior pitting and crevice corrosion capabilities to austenitic and duplex stainless steels in virtually all corrosive media, and critical pitting temperature Above 50¡ãC .

UNS N08367 also commonly referred to as alloy AL6XN is a low carbon, high purity, nitrogen-bearing “super-austenitic” nickel-molybdenum alloy with excellent resistance to chloride pitting and crevice corrosion.

Nilo / Alloy K W.Nr.: 1.3981
UNS: K94610 ASTM F15
Fixed-expansion glass-encapsulated iron-nickel-cobalt alloys, Kovar alloys, have a linear thermal expansion coefficient similar to that of hard glass within a certain temperature range
For mating sealing with hard glass

Hastelloy C2000 is available in a variety of sizes and thicknesses, this type of nickel-chromium-molybdenum alloy is renowned for its superior strength and corrosion resistance.

304 Piping Spools are made of 304 Stainless Steel, a common and popular material in many industrial applications that require resistance to corrosion and oxidation. These S30400 Piping Spools are prefabricated using specialized machinery and processes, which ensure that they are highly accurate and reliable.

ASTM A312 TP316 is a standard specification for seamless, straight-seam welded, and heavily cold worked welded austenitic stainless steel pipes used in high-temperature and general corrosive service applications. The 316 Seamless Industrial Steel Pipe is made from a combination of chromium, nickel, and molybdenum, which gives SS 316 Seamless Tube excellent resistance to corrosion and rust.

Inconel 600 round bar is a nickel-based alloy with benign carburization and excellent corrosion resistance at high temperatures. Inconel 600 round bars are effective against drying Cl2 and many other different gases at mild and high temperatures. Alloy 600 bar is a nickel-chromium alloy with good oxidation resistance and resistance to chloride pressure decomposition cracking, high cleanliness water corrosion and acid oxidation at elevated temperatures.

The pipes of seamless configurations have higher load-bearing capacity and strength over other grades.

This provides greatly enhanced resistance to sulfuric acid. It also has a high chromium content, to maximize its resistance to oxidizing chemicals and process streams contaminated with ferric ions and dissolved oxygen.

It is widely used in offshore oil and gas exploration/production and in heat exchangers in petrochemical/chemical processing.

Nickel-copper-based alloy 400 Monel 2.4360 cold drawn rod is virtually immune to chloride stress-related corrosion cracking when exposed to corrosive media in typical environments. Monel 400 is a copper and nickel based alloy that is popular today due to its high performance. The alloy has excellent acid and alkali resistance. In addition, it has good tensile strength, ductility, excellent thermal conductivity, and can be hardened by cold work. Additionally, it can be used in applications with temperatures ranging from minus to 538 degrees Celsius.

Alloy 800 is a nickel-iron-chromium alloy with high strength and excellent resistance to oxidation and corrosion at high temperatures. ASTM B407 UNS N08800 Incoloy 800 W. Nr. 1.4876 Welded Pipe is widely used for construction of equipment requiring corrosion resistance, heat resistance, strength, and stability for service up to 1500°F (816°C).

Inconel 718 is a nickel-chromium-based alloy that is commonly used in high-temperature applications such as aerospace and gas turbines. One of the most important factors in the production of ASTM B670 Inconel 718 Sheet is the plate rolling process. There are two main types of Inconel 718 plates available on the market: hot rolled and cold rolled plates.

It is able to withstand a wide range of oxidizing and non-oxidizing chemicals, and exhibits outstanding resistance to pitting and crevice attack in the presence of chlorides and other halides.

Inconel 625 Coil is characterized by its excellent resistance to oxidation, high-temperature corrosion and fatigue. ASTM B443 UNS N06625 Inconel Plate is widely used in the aerospace, chemical processing and oil and gas industries due to its superior strength, toughness and durability even in extreme environments.

316L 1.4401 S31603 Stainless Steel Pipe is a highly versatile and durable pipe option commonly used in a wide range of industrial and commercial applications. This SS UNS S31603 pipe is made from high quality 316L stainless steel with excellent resistance to corrosion, oxidation and staining, making it ideal for harsh environments or high stress applications.

There are many ways you can manufacture flanges, the most prominent ones being casting and forging.

Typical applications of 625 alloy include thermal shielding hardware, pipes for furnaces, gas turbine engines, combustion liners and spray rods, chemical plant hardware, and special seawater applications.

SS 304 Forged Tee provides better mechanical properties for connecting pipes to mains. A tee consists of an inlet and two outlets placed at right angles to each other. SS 304 Forged Cross is used where four pipes intersect. They either divide the process or merge the process.

ASTM A182 Stainless Steel Flanges are manufactured per ASME B16.5 150#, 300#, 600#, 900#, 1500#, 2500#.

La aleacion K500 tiene aproximadamente tres (3) veces el limite elastico y el doble de la resistencia a la traccion de 400 en comparacion con 400. MONEL K500 se puede fortalecer aun mas mediante el trabajo en frio antes del endurecimiento por precipitacion.

Incoloy 825 is stable annealed at 940°C. The softest structure was obtained at 980°C. Sections heavier than sheet, strip and wire should be quenched to avoid sensitivity.

Stainless steel 304 bolts are made from a basic austenitic stainless steel material with a composition of 18% chromium and 8% nickel. Meanwhile, Type 304/18-8 stainless steel is highly resistant to rust and corrosion, and may be slightly magnetic. For chemical, saltwater or coastal environments, 316 stainless steel is highly recommended.

HASTELLOY C-276 alloy has excellent resistance to a variety of chemical process environments, including strong oxidizing agents such as ferric and copper chlorides, hot fouling media (organic and inorganic), chlorine, formic and acetic acids, acetic anhydride, and Seawater and brine solutions. It can be used in flue gas desulfurization systems due to its excellent resistance to sulfur compounds and chloride ions in most scrubbers.

Stainless steel and copper are generally both ideal for indoor and outdoor applications and both hold up well over time. Stainless steel, comprises of a variety of alloys with chromium content ranging from 12 to 30 per cent, which protects it as long as the localised concentration is in excess of 12 per cent.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

2205 is the most widely used duplex (ferritic/austenitic) stainless steel grade. It finds applications due to both excellent corrosion resistance and high strength.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

There are also different standards that govern the nominal bore sizes of the flanges. The ANSI B16.5 SS 309S Blind Flange is a blind flange that is used to close a connection.

Incoloy 800HT hot-rolled sheet is generally a nickel alloy sheet with a thickness of 3mm-5mm or more. Incoloy 800HT sheet inherits the superior corrosion resistance, high temperature resistance and fatigue resistance of Incoloy 800HT.

Duplex Steel Pipe is a metal alloy pipes that is made out of steel with different alloying elements. The name comes from the dual nature of the material.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

Inconel 718 or Alloy 718 is the most commonly used hardenable Inconel nickel alloy grade. Due to its precipitation hardening and its main nickel and chromium components, this alloy has excellent corrosion resistance and high strength even at high temperatures.

The UNS S31254 Weld Neck Flange is preferred in welding applications. These flanges can hold the pipe in place during welding. The material has up to 1390 degrees Celsius melting point so that it could be used in high temperature and high pressure applications such as power generation, heat exchangers, boiler and petrochemical industrial applications.

Nickel 800 cold rolled bars run on the die shortly after the hot rolling process, allowing the bars to exhibit exceptional strength and excellent surface finish. Alloy 800 Bright Bar is an aesthetically appealing grade that can be produced in different finishes and sizes.

A flange is a ring of steel (forged, cut from plate, or rolled) designed to connect sections of pipe, or to join pipe to a pressure vessel, valve, pump or other integral flanged assembly. Flanges are joined to each other by bolts, and to the piping system by welding or threading (or loose when stub ends are used). Stainless steel flange simplified as SS flange, it refers to the flanges that made of stainless steel. Common material standards and Grades are ASTM A182 Grade F304/L and F316/L, with pressure ratings from Class 150, 300, 600 etc and to 2500. It used in more industries than carbon steel as stainless steel has better resistant performances on corrosion environment and always provides with a good appearance.

Steel bars are one of the core components of any manufacturing
industry or for that matter any industry that relies on machineries.
Thanks to its versatile applications, steel bars find itself in the
epicenter of most of engineering industries, be it automotive, textile,
fabrication, construction, cement, ship building, paper and pulp,
defence, heavy earth moving equipments or aerospace.
The overwhelming popularity of steel bars is owed to the fact that
it is possible to be produced in varying types, shapes, sizes, and
grades of bars to cater the exact technical requirements. Steel
bars generally have the shapes such as flat, round, hexagonal,
square and channel and on most of the occasions, it is the shape
of the bar that defines its application area

Nickel alloys are alloys with nickel as principal element. Complete solid solubility exists between nickel and copper. Wide solubility ranges between iron, chromium, and nickel make possible many alloy combinations.Steel plates are often used for structural and construcation applications, pressure vessels, marine and off shore equipment, and military applications. The grade, elements and parameters of a steel plate are also improtant in how it is used.

They also have excellent resistance to corrosion cracking and localized corrosion such as pitting, intergranular and crevice. Unlike other standard austenitic steels, UNS S31803 steel has excellent magnetic properties.

304 stainless steel is the most common stainless steel. The steel contains both chromium (between 18% and 20%) and nickel (between 8% and 10.5%)[1] metals as the main non-iron constituents. It is an austenitic stainless steel.When it comes to uses, SS304 can be found in kitchen sinks and other appliances such as toasters and microwave ovens. SS304 is also used to make pressure vessels, wheel covers as well as for building facades.

Steel flanges provide an easy access for cleaning, inspection or modification. They usually come in round shapes but they can also come in square and rectangular forms. The flanges are joined to each other by bolting and joined to the piping system by welding or threading and are designed to the specific pressure ratings; 150lb, 300lb, 400lb, 600lb, 900lb, 1500lb and 2500lb.

A flange can be a plate for covering or closing the end of a pipe. This is called a blind flange. Thus, flanges are considered to be internal components which are used to support mechanical parts.

Superalloy 625 elbow works excellently under high saline seawater, and more so in milder environments such as fresh water and standard atmospheric conditions.

Alloy steel is steel that is alloyed with a variety of elements in total amounts between 1.0% and 50% by weight to improve its mechanical properties. Alloy steels are broken down into two groups: low alloy steels and high alloy steels. The difference between the two is disputed. Smith and Hashemi define the difference at 4.0%, while Degarmo, et al., define it at 8.0%.[1][2] Most commonly, the phrase “alloy steel” refers to low-alloy steels.

Low weight combined with very high strength allows the use of even thinner materials, making an exhaust system made of high-quality titanium components extremely light and resistant at the same time.

Inconel 601 Flat Washers are a family of nickel-chromium-molybdenum alloys for high strength and good corrosion resistance at elevated temperatures. The high alloy content of Inconel 601 Punch Washers enables them to withstand a wide range of severe corrosive environments. Inconel 601 machined washers are commonly used in industrial applications that require very strong components, including power and utility equipment, petrochemical, and oil and gas processing machinery. Inconel 601 round washers are used in high temperature applications to compensate for loosening of threaded connections or to maintain sealing effects, such as pipe connections in chemical or steel mills, heat exchangers, boilers, rolling mills, etc.

Copper Nickel can be bent without special tools. Pure copper is not as strong as other alloyed metals. Therefore, copper-nickel alloy pipes include materials such as iron and manganese for added strength.

These sheets have excellent tensile strength, creep rupture, and corrosion resistance, while also exhibiting excellent pitting and high temperature crevice resistance. In addition, it has excellent durability to withstand acid attack and withstand harsh climatic conditions.

Both 316 and 316L stainless steel alloys are marine steels, but they do have some key differences. The composition of 316L has a lower proportion of carbon. To meet the requirements of 316L stainless steel, the carbon content cannot exceed 0.03%. This reduces the risk of carbon precipitation, making it a better choice for welding to ensure maximum corrosion resistance.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

ASME SA 479 Duplex Steel UNS S32205 Hex Bolts are commonly used in chemical processing, transportation and storage – pressure vessels, tanks, piping and heat exchangers. ASTM A479 Duplex Stainless Steel 1.4462 Bolts have excellent resistance to stress corrosion cracking, as well as excellent resistance to localized corrosion, including intergranular, pitting, and crevice corrosion.