wholesale duplex stainless steel S31803 1.4462 Hex Nut DIN934

Higher chromium, molybdenum and nitrogen content results in a Pitting Resistance Equivalent Number (PREN) > 40, providing superior pitting and crevice corrosion capabilities to austenitic and duplex stainless steels in virtually all corrosive media, and critical pitting temperature Above 50¡ãC .

A789 UNS S31803 and UNS S32205 are two grades of duplex stainless steel that are widely used in various industrial applications. These Duplex S31803 Seamless Pipes are known for their excellent corrosion resistance, high strength, and good weldability. A789 is a specification that covers seamless and welded tubes made from duplex stainless steel.

It is widely used in offshore oil and gas exploration/production and in heat exchangers in petrochemical/chemical processing.

ASTM A240 Type 2205 Plate is a duplex stainless steel plate that is used extensively in various industries such as chemical processing, oil and gas exploration, and marine engineering. SA 240 GR 2205 Sheet is made from grade 2205 stainless steel, which is a combination of ferritic and austenitic steel.

Super Duplex is composed of 24% to 26% chromium, 6% to 8% nickel, 3% molybdenum and 1.2% manganese, with the remainder being iron. Trace amounts of carbon, phosphorus, sulfur, silicon, nitrogen, and copper were also found in Super Duplex.

Duplex ( UNS S31803 / S32205 ) rods, also known as steel rods (ASTM A276 / ASTM A479 ), have excellent corrosion resistance. Stainless steel rods/stainless steel rods ( en 1.4462 ) are resistant to intergranular and crevice corrosion.

Super Duplex Alloy UNS S32750 (F53 / 1.4410 / Alloy 32750 / Alloy 2507) combines the most desirable characteristics of both ferritic and austenitic steels.

ASTM A479 Super Duplex 2507 Hex Bolts combines high strength and good ductility with outstanding corrosion resistance qualities. The higher chromium, molybdenum and nitrogen contents in these ASME SA 479 Alloy 2507 Hex Bolts result in a Pitting Resistance Equivalent number (PREN) of >40.

The duplex structure results in improved stress-corrosion cracking resistance, compared with the austenitic stainless steels, and improved toughness and ductility, compared with the ferritic stainless steels.

They are resistant to general corrosion. We are suppliers of ASME SA182 Duplex Steel UNS S32205 Weld Neck Flanges to sea water and power generation equipment.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

Astm A182 F51 flange is made up of carbon, chromium, manganese, silicon, phosphorus, sulfur, nickel, nitrogen, molybdenum and iron.

Super Duplex 2507 is used in environments containing high levels of chlorides or dissolved oxygen, such as seawater cooling, salt evaporation, and desalination, geothermal wells.

Duplex 2205 has higher resistance to crevice and erosion corrosion than sus316L austenitic stainless grades.

ASTM A182 F53 Super Duplex Flanges available with rating class of 150#, 300#, 400#, 600#, 900# and 1500# in sizes NPS 1/2 to 24.

Super Duplex SAF 2507 is a really strong material with great corrosion resistance.

Duplex steels are characterised by high chromium (19¨C28%) and molybdenum (up to 5%) and lower nickel contents than austenitic stainless steels. The most used duplex stainless steels are the 2205 (22% Chromium, 5% Nickel) and the 2507 (25% Chromium, 7% Nickel); 2507 is known as ¡°super duplex¡± due to its higher resistance to corrosion.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

Duplex plates have a two-phase or two-phase microstructure. The microstructure of the duplex steel S32205 foil consists of equal proportions of ferrite and austenite.

The Super Duplex 2507 Pipe is made with 25% of chromium, 4% of molybdenum, and 7% of nickel in their composition. As a result, these pipes possess superior corrosion and erosion resistance in various stress-induced environments.

2205 is the standard duplex grade and is more economical than most other duplex grades.

Unlike the conventionally used austenitic 300 series stainless steels, duplex stainless steels generally have exaggerated properties. Duplex tube suppliers recommend using only this alloy as it combines both properties to produce positive results.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.55

The raised face allows for the flange to have more bolt holes and connection surface while the welded neck grips the pipe in place. The applications are oil and gas, petroleum, petrochemical and other industrial applications.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

ASTM A789 / ASME SA789 covers grades of average wall thickness, or, if specified on the order, minimum wall thickness, of stainless steel tubing for services requiring general corrosion resistance, with particular emphasis on resistance to stress corrosion cracking. These steels are suscep- tible to embrittlement if used for prolonged periods at elevated temperatures.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

The content of chromium, molybdenum, nickel and nitrogen in the 2205 duplex bolt alloy enhances its mechanical properties. E.g. ¨C UNS S31803 Fastener alloys contain trace amounts of carbon.

Duplex 2205 round steel contains 22% chromium, 3% molybdenum, and 5-6% nickel. In addition to excellent impact toughness and high strength, it also has high general, local and stress corrosion resistance.

Duplex steel UNS S31803 round bars are known as stainless austenitic-ferritic, with equal amounts of ferrite and austenite.

Duplex steel sheets are resistant to chloride stress corrosion cracking at 150¡ãC.

The flange is second most used joining method after selding. Flanges are used when joints need dismantling. It provides flexibility for maintenance. Flange connects the pipe with various equipment and valves. Breakup flanges are added in the pipeline system if regular maintenance in required during plant operation.
A flanged joint is composed of three separate and independent although interrdlated components; the flanges, the gaskets, and the bolting; which are assembled by yet another influence, the fitter. Special controls are required in the selection and application of all there elements to attain a joint, which has acceptable leak tightness.
A flange is a protruded ridge, lip or rim, either external or internal, that serves to increase strength (as the flange of an iron beam such as an I-beam or a T-beam); for easy attachment/transfer of contact force with another object (as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera); or for stabilizing and guiding the movements of a machine or its parts (as the inside flange of a rail car or tram wheel, which keep the wheels from running off the rails). The term “flange” is also used for a kind of tool used to form flanges.

The yield strength of this alloy is about 570 MPa. In addition to strength, A240 S32750 Super Duplex Plate is an alloy that provides the best resistance to crevice and pitting corrosion.

As experts in the field of fasteners, we recognize that this alloy can be used in a variety of applications including heat exchangers, piping, pressure vessels, tanks, fans, pulp and paper equipment, oilfield equipment and press rolls. At HT PIPE you can find Duplex Premium Gaskets in high quality.

This alloy is especially useful in the -50¡ãF/+600¡ãF temperature range. For applications outside this temperature range, this alloy can also be considered, but there are some restrictions, especially when used in welded structures.

The S31803 fastener series demonstrates the properties of ferritic and austenitic stainless steels. These fasteners exhibit excellent resistance to crevice corrosion, stress corrosion cracking and pitting corrosion in harsh environments. In addition, these are excellent in resistance to chloride and sulfide stress corrosion environments.

SA 182 F53 S32750 Flange is a super duplex stainless steel supplied in the hot worked and solution annealed condition.